Shark Rocket Deluxe Pro UV330 Series Vacuum Cleaner Manual

The Shark Rocket Deluxe Pro UV330 is a versatile, lightweight corded stick vacuum featuring PowerFins technology, DuoClean floor nozzle, Anti-Allergen Complete Seal with HEPA filter, UV Sanitizer mode, multiple cleaning modes (Hard Floor, Carpet, Handheld), LED headlights, a large dust cup, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized floor nozzle with DuoClean brushes, Handheld pod, Dust cup with HEPA filter, UV Sanitizer light, LED headlights, Wand, Charging dock (if cordless model), and various attachments.

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Attach wand: Insert wand into floor nozzle until it clicks securely.
2. Connect handheld pod: Attach wand to the top of the handheld pod.
3. Install filter: Ensure HEPA filter is properly seated in dust cup lid.
4. Plug into power outlet (for corded model) or place on charging dock (if applicable).

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll and openings.

First-Time Use

Before first cleaning, perform a quick test in an open area.

1. Select surface setting: Use mode switch to select Hard Floor or Carpet.
2. Power on: Press POWER button; ensure brushroll spins freely.
3. Test attachments: Connect desired tool to handheld pod for above-floor cleaning.
4. Empty dust cup: After initial use, empty dust cup and check filter.

CAUTION! Do not vacuum large debris, liquids, or hot ashes. Keep hair, loose clothing, and fingers away from moving parts.

Specifications

• Model: Shark Rocket Deluxe Pro UV330 Series.
• Type: Corded stick vacuum (or specify if cordless).
• Technology: PowerFins brushroll, DuoClean nozzle, Anti-Allergen Complete Seal.
• Filtration: Washable HEPA filter.
• Special Feature: UV Sanitizer mode (UV-C light).
• Dust Cup Capacity: 0.7 quarts.
• Attachments: Crevice tool, dusting brush, pet multi-tool, upholstery tool.
• Power Source: 120V AC, 60Hz (corded) or Lithium-ion battery (if cordless).
• Weight: Approximately 7.5 lbs.

Controls and Modes

Main controls located on handheld pod. POWER button: Turns vacuum on/off; press and hold for 3 seconds to activate UV mode (indicator light will illuminate). Mode switch: Toggle between Hard Floor (for hard surfaces) and Carpet (for carpets/rugs).

LED Indicators: Power ON (blue), UV mode active (purple), filter maintenance alert (red).

Handheld mode: Detach pod from wand to use as a handheld vacuum with attachments. Brushroll control: Automatically adjusts speed based on surface setting.

Attachments & Accessories

Included accessories: Crevice tool (for tight spaces), dusting brush (for delicate surfaces), pet multi-tool (for hair and upholstery), upholstery tool.

1. To attach: Press accessory onto front of handheld pod or wand end until it clicks.
2. To remove: Press release button and pull accessory off.
3. Storage: Store attachments on wall mount or in provided caddy.

Tip: Use the pet multi-tool on stairs and furniture for pet hair removal.

Cleaning Operations

For best results, select appropriate mode and attachment.

1. Hard floors: Use Hard Floor mode; DuoClean soft roller picks up fine dust.
2. Carpets/Rugs: Use Carpet mode; brushroll agitates fibers for deep cleaning.
3. Above-floor cleaning: Detach handheld pod; attach desired tool.
4. Empty dust cup: Press release button to remove cup; empty into trash.
5. Clean filter: Remove HEPA filter every month and rinse under cold water.

WARNING! Do not use UV mode on dark, reflective, or uneven surfaces. Keep UV light away from eyes and skin.

UV Sanitizer Feature

UV mode uses UV-C light to help reduce certain bacteria and germs on hard surfaces*.

1. Activate: Ensure vacuum is on Hard Floor mode. Press and hold POWER button for 3 seconds until purple light illuminates.
2. Deactivate: Press POWER button once to turn off UV mode (light turns off).
3. Usage: Move nozzle slowly over surface to allow light contact.

*UV-C light is not a substitute for regular cleaning and disinfecting. Effectiveness may vary. Refer to user manual for details.

Maintenance & Care

Regular maintenance ensures optimal performance.

• Empty dust cup after each use.
• Clean filter monthly: Rinse HEPA filter under cold water; air dry for 24 hours before reinstalling.
• Check brushroll: Remove debris or hair wrap from brushroll regularly.
• Wipe exterior: Use dry cloth; do not use liquids or abrasive cleaners.

CAUTION! Always unplug vacuum before maintenance. Do not operate with wet filter.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. UV-C feature complies with FDA regulations for consumer devices. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug vacuum for 10 minutes; restart.

Service: 1-800-798-7398; sharkclean.com