Shark Rocket CS100 Series Vacuum Cleaner Manual

The Shark Rocket CS100 Series is a lightweight, corded upright vacuum cleaner featuring DuoClean technology for carpets and hard floors, a motorized brushroll, Anti-Allergen Complete Seal technology with a HEPA filter, a detachable pod for portable cleaning, multiple attachments (crevice tool, pet multi-tool, dusting brush), swivel steering, and a 30-foot power cord. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Detachable pod, Handle with controls, Hose, Wand, Motorized floor nozzle, Power cord, and accessory set.

Feature	Description
DuoClean Technology	Dual brushrolls for carpets and hard floors
Anti-Allergen Complete Seal	HEPA filter captures 99.9% of dust and allergens
Motorized Brushroll	Deep cleans carpets; on/off switch for hard floors
Detachable Pod	Converts to a portable vacuum for above-floor cleaning
Swivel Steering	Maneuvers easily around furniture
30-Foot Power Cord	Extended reach for large areas
Accessory Set	Crevice tool, pet multi-tool, dusting brush
Washable Filters	Foam and felt filters; HEPA filter
Dust Cup Release	Easy-empty dust cup with one-touch release
Handle Controls	Power switch and brushroll on/off

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into main body until it clicks.
Connect wand: Insert wand into hose connector on back of vacuum.
Attach floor nozzle: Connect wand to motorized floor nozzle.
Install accessories: Store tools on wand caddy.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll.

First-Time Use

Plug in vacuum; ensure all parts are securely connected.

Select floor setting: Use brushroll on for carpets; turn off for hard floors.
Adjust suction: Use power switch on handle (Low/High).
Begin vacuuming: Push vacuum forward and back slowly for best results.
Empty dust cup: Press release button when full; empty into trash.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep cord away from brushroll.

Specifications

Model: Shark Rocket CS100 Series.
Type: Corded upright vacuum with detachable pod.
Technology: DuoClean, Anti-Allergen Complete Seal with HEPA filter.
Cord Length: 30 feet.
Dust Cup Capacity: 0.7 dry quarts.
Attachments: Crevice tool, pet multi-tool, dusting brush, upholstery tool.
Filters: Washable foam and felt filters; HEPA filter.
Power Source: 120V AC, 60Hz.
Weight: 9.5 lbs (main unit).

Controls and Settings

Handle: Power switch (Low/High/Off), Brushroll on/off button. Main body: Dust cup release, Pod release button.

Settings: Carpet mode (brushroll on), Hard floor mode (brushroll off), Above-floor mode (detach pod). Suction: Adjust via power switch. Accessories: Attach to hose or pod for detailed cleaning.

Using Attachments

Detach pod for above-floor cleaning; attach tools to hose.

Detach pod: Press release button on back; lift pod off main body.
Connect tool: Insert crevice tool, pet multi-tool, or dusting brush into hose end.
Clean: Use for furniture, stairs, ceilings, and tight spaces.
Reattach pod: Align pod with main body; press until it clicks.

Tip: Store tools on wand caddy for easy access.

Cleaning Modes

Supports carpet, hard floor, and above-floor cleaning.

Carpet mode: Ensure brushroll is on; use High suction for deep cleaning.
Hard floor mode: Turn brushroll off to prevent scattering debris.
Above-floor mode: Detach pod; attach desired tool to hose.
Pet hair: Use pet multi-tool on upholstery and stairs.
Dusting: Use dusting brush for shelves and blinds.

WARNING! Do not use on wet surfaces. Avoid vacuuming cords or curtains.

Maintenance & Care

Unplug before maintenance. Regular cleaning ensures optimal performance.

Empty dust cup: After each use; press release button to remove.
Clean filters: Rinse foam and felt filters monthly; air dry 24 hours.
Check brushroll: Remove debris wrapped around brushroll regularly.
Inspect hose: Clear clogs with long object if suction reduces.
Store properly: Wrap cord around cord hooks; store in dry place.

CAUTION! Do not use vacuum without filters. Ensure all parts are dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clogged filter	Empty dust cup; clean filters; check hose for clogs.
Brushroll not spinning	Debris/switch off	Clear debris from brushroll; ensure brushroll switch is on.
Vacuum shuts off	Overheating/clog	Unplug; let cool 60 minutes; clear clogs in hose or nozzle.
Pod not detaching	Release button not pressed fully	Press release button firmly; lift pod straight up.
Unusual noise	Object in brushroll/hose	Unplug; inspect brushroll and hose; remove foreign object.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com