Shark Rocket AH450 Series Vacuum Cleaner Manual

The Shark Rocket AH450 Series is a lightweight, corded upright vacuum cleaner featuring DuoClean technology, Anti-Allergen Complete Seal, a motorized brushroll for carpets and hard floors, multiple attachments for above-floor cleaning, a large-capacity dust cup, and a foldable handle for easy storage. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Safety Information 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Handle, Dust Cup, Motorized Brushroll, Hose, Wand, and various cleaning attachments.

FeatureDescription
DuoClean TechnologyDual brushrolls for carpets and hard floors
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
Motorized BrushrollAutomatically adjusts between carpet and hard floor
Large Capacity Dust CupEasy-empty, no bags required
Foldable HandleFor compact storage
Attachments IncludedPet Multi-Tool, Crevice Tool, Duster Brush
Power Cord25-foot cord with cord wrap
On-Board StorageAttachments store on the vacuum
LED LightsOn brushroll to illuminate dark areas
Washable FiltersFoam and felt filters for easy maintenance

Assembly & Setup

Unpack all parts and inspect for damage.

  1. Attach the handle: Align the handle with the main body until it clicks into place.
  2. Install the wand: Insert the wand into the hose connector until secure.
  3. Attach cleaning tool: Connect desired attachment to the end of the wand.
  4. Plug into a standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure all parts are properly assembled.

  1. Check filters: Ensure foam and felt filters are installed correctly.
  2. Clear area: Remove large debris or obstacles from the floor.
  3. Select mode: Use the floor selector switch for carpet or hard floor.
  4. Begin vacuuming: Press the power button and push vacuum forward.

CAUTION! Do not vacuum wet spills, large objects, or hot ashes.

Specifications

Controls and Parts

Main Controls: Power Button, Floor Selector Switch (Carpet/Hard Floor), Brushroll On/Off Switch.

Parts Identification: Handle Release Pedal, Dust Cup Release Button, Hose, Wand, Attachment Holder, Cord Wrap.

Operation: Use power button to turn on/off. Use floor selector to optimize suction for surface type. Use brushroll switch to turn brushroll on for carpets or off for delicate rugs and hard floors.

Using Attachments

For above-floor cleaning: detach wand from floor nozzle.

  1. Turn off and unplug vacuum.
  2. Press the wand release button to detach from floor nozzle.
  3. Attach desired tool (Pet Multi-Tool, Crevice Tool, Duster Brush).
  4. Plug in and turn on to use.

Tip: Store attachments on the onboard holder when not in use.

Cleaning Modes

Supports multiple cleaning configurations.

  1. Upright Mode: For floor cleaning with motorized brushroll.
  2. Handheld Mode: Detach pod from handle for portable cleaning.
  3. Above-Floor Mode: Use wand and attachments for furniture, stairs, ceilings.
  4. Hard Floor Mode: Brushroll on with soft brushroll engaged.
  5. Carpet Mode: Brushroll on with bristle brushroll for deep cleaning.

WARNING! Do not use the vacuum to pick up hard or sharp objects that could damage the brushroll.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup: Press release button and empty when full.
  2. Clean filters: Rinse foam and felt filters monthly with water, air dry completely.
  3. Clear brushroll: Remove hair and debris from brushroll regularly.
  4. Check for blockages: Inspect hose, wand, and nozzles if suction is reduced.

CAUTION! Always unplug vacuum before performing maintenance. Ensure filters are completely dry before reinstalling.

Safety Information

Read all instructions before use. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

WARNING! Do not use outdoors or on wet surfaces. Do not leave vacuum plugged in when not in use. Do not use with damaged cord or plug.

Warranty & Support

Shark Rocket AH450 Series comes with a 5-year limited warranty. Warranty covers defects in materials or workmanship. For warranty service, contact Shark Customer Service. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower source/plugCheck outlet; ensure plug is fully inserted; check household fuse/circuit breaker.
Loss of suctionFull dust cup/blockageEmpty dust cup; check hose, wand, and nozzles for blockages; clean filters.
Brushroll not spinningBrushroll switch/obstructionEnsure brushroll is set to ON; clear debris from brushroll; check for tangled hair/string.
Vacuum is overheatingBlockage/filtersTurn off and unplug; let cool; check for blockages; clean or replace filters.
Attachments not picking upClog/incorrect setupDetach and check for clogs; ensure attachment is clicked securely into wand.

Reset: Unplug vacuum for 60 minutes if motor overheats, then restart.

Service: 1-800-798-7398; www.sharkclean.com

Shark Rocket AH450 Series Vacuum Cleaner Manual © - All Rights Reserved 2025