Shark Roadster UV208 Vacuum Cleaner Manual

The Shark Roadster UV208 is a powerful upright vacuum cleaner featuring UV-C sanitizing technology, HEPA filtration, multi-surface cleaning capabilities, a motorized brushroll, LED headlights, and a lightweight, maneuverable design. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 8. UV-C Sanitizing Technology 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: UV-C sanitizing head, HEPA filtration system, motorized brushroll, LED headlights, telescopic wand, dust cup with one-touch release, and various cleaning attachments.

Feature	Description
UV-C Sanitizing Head	Emits UV-C light to kill germs and bacteria on surfaces
HEPA Filtration	Captures 99.9% of dust and allergens
Motorized Brushroll	Automatically adjusts for carpets and hard floors
LED Headlights	Illuminates dark areas under furniture
Telescopic Wand	Adjustable length for comfortable cleaning
Dust Cup	Large capacity with one-touch release for easy emptying
Cleaning Modes	CARPET, HARD FLOOR, and TURBO settings
Attachments	Crevice tool, dusting brush, upholstery tool included
Power Cord	25-foot retractable cord
Weight	12.5 lbs for easy maneuverability

Assembly & Setup

Unpack and inspect all contents. Assemble following steps below.

Attach telescopic wand: Insert wand into vacuum body until it clicks.
Connect cleaning head: Align head with wand and push until secure.
Install attachments: Store on vacuum body dock or separately.
Plug into standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from moving parts.

First-Time Use

Before first use, charge UV-C system (if applicable) and perform test run.

Power on: Press power button on handle; LED indicator will illuminate.
Select cleaning mode: Use mode switch for CARPET, HARD FLOOR, or TURBO.
Activate UV-C: Press UV button to engage sanitizing light (ensure head is on surface).
Adjust height: Use height adjustment lever for different carpet piles.
Empty dust cup: Check and empty after each use for optimal performance.

CAUTION! Do not look directly at UV-C light. Keep away from children and pets during operation.

Specifications

Model: Shark Roadster UV208
Type: Upright vacuum with UV-C sanitization
Power: 120V, 60Hz, 12 Amps
Filtration: HEPA filter, washable
Cord Length: 25 feet retractable
Dust Cup Capacity: 1.5 liters
Weight: 12.5 lbs
UV-C Wavelength: 253.7 nm
Warranty: 5-year limited warranty
Noise Level: ≤75 dB

Controls and Settings

Main controls located on handle and body. Handle: POWER button, MODE switch (CARPET/HARD FLOOR/TURBO), UV button. Body: Height adjustment lever, brushroll on/off switch, dust cup release button.

Indicator Lights: Power (green), UV-C active (blue), filter check (red).

Settings: CARPET mode (default for medium pile), HARD FLOOR (reduces suction for hard surfaces), TURBO (maximum suction for deep cleaning). UV-C: Activates only when head is flat on surface with vacuum moving forward.

Cleaning Modes & Attachments

Use appropriate mode and attachment for different surfaces.

CARPET mode: For carpets and rugs; brushroll spins at standard speed.
HARD FLOOR mode: For wood, tile, laminate; reduces suction to prevent scattering debris.
TURBO mode: For high-traffic areas and deep cleaning; maximum suction power.
Crevice tool: For tight spaces, corners, and along edges.
Dusting brush: For delicate surfaces, blinds, and shelves.
Upholstery tool: For sofas, chairs, and stairs.

Tip: Turn off vacuum before changing attachments or modes.

UV-C Sanitizing Technology

UV-C light kills up to 99.9% of germs and bacteria on surfaces.

Activation: Press UV button; blue light indicates UV-C is active.
Operation: Move vacuum slowly over surface for effective sanitization.
Safety: UV-C turns off automatically when vacuum is lifted or tilted.
Effectiveness: Works on hard floors and low-pile carpets; not for shag carpets.

WARNING! Avoid direct exposure to UV-C light. Do not use on humans or animals. Replace UV-C bulb every 1-2 years or as needed.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Empty dust cup: Press release button; empty after each use.
Clean filters: Wash HEPA filter every 3 months (air dry completely).
Check brushroll: Remove hair and debris monthly; ensure free rotation.
Inspect UV-C bulb: Clean with dry cloth; replace if dark or damaged.
Wipe exterior: Use damp cloth; avoid water near electrical components.

CAUTION! Unplug vacuum before maintenance. Do not immerse in water.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. UL listed for safety. UV-C emission complies with IEC 62471. Copyright © 2025 SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug; try different outlet; ensure power switch is on.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose and attachments for blockages.
Brushroll not spinning	Debris/hair wrap	Turn off and unplug; remove debris from brushroll.
UV-C light not working	Bulb/faulty connection	Ensure vacuum is on flat surface; replace UV-C bulb if needed.
Overheating	Clogged filter/full dust cup	Clean filter; empty dust cup; let vacuum cool for 30 minutes.

Reset: Unplug for 10 minutes; plug back in.

Service: 1-800-798-7398; www.sharkclean.com