Shark R-WD265 Vacuum Cleaner Manual

The Shark R-WD265 is a versatile upright vacuum cleaner designed for deep carpet cleaning and efficient hard floor care. It features a powerful motor, advanced brushroll technology, a large-capacity dust cup, multiple cleaning modes, a lightweight design, swivel steering, and a range of specialized attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized brushroll, Dust cup with easy-empty mechanism, Handle with controls, Swivel steering, Hose and wand, Attachments (crevice tool, dusting brush, upholstery tool).

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into body until it clicks securely.
2. Install wand: Insert wand into hose connection until locked.
3. Attach hose: Connect hose to wand and body ports.
4. Install attachments: Store on holder or connect as needed.
5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; turn on power switch.

1. Select floor type: Adjust brushroll setting for carpet or hard floor.
2. Begin cleaning: Push vacuum forward and back in overlapping strokes.
3. Empty dust cup: Press release button when full; empty into trash.
4. Use attachments: Detach wand for above-floor cleaning.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll. Do not vacuum liquids.

Specifications

• Model: Shark R-WD265.
• Power: 120V AC, 60Hz.
• Suction Power: Adjustable via brushroll control.
• Dust Cup Capacity: 1.5 liters.
• Cord Length: 25 feet.
• Weight: 12 lbs.
• Filters: Washable foam and felt filters.
• Brushroll: Motorized, anti-hair wrap technology.
• Warranty: Limited 5-year warranty.
• Operating Temp: Standard indoor temperatures.

Controls and Settings

Handle controls: Power switch, Brushroll on/off button. Body: Dust cup release, Hose release, Cord wrap.

Settings: Carpet mode (brushroll on), Hard floor mode (brushroll off), Above-floor mode (wand detached).

Adjustments: Suction power via brushroll control, handle height (if adjustable). Maintenance: Filter access, brushroll cleaning, dust cup emptying.

Using Attachments

Attachments: Crevice tool, dusting brush, upholstery tool.

1. Detach wand: Press release button on handle.
2. Connect tool: Insert tool into wand end until secure.
3. Clean: Use appropriate tool for crevices, shelves, furniture.
4. Return: Store attachments on holder when not in use.

Tip: For best results, turn off brushroll when using attachments on delicate surfaces.

Cleaning Modes

Supports carpet, hard floor, and above-floor cleaning.

1. Carpet mode: Brushroll on for deep cleaning.
2. Hard floor mode: Brushroll off to prevent scattering debris.
3. Above-floor mode: Use wand and attachments for stairs, furniture.
4. Spot cleaning: Use hose and tool for concentrated areas.

WARNING! Do not use on wet surfaces. Avoid vacuuming large objects that may clog hose.

Maintenance & Care

Unplug before maintenance. Empty dust cup after each use. Clean filters monthly.

1. Empty dust cup: Press release; empty contents.
2. Clean filters: Rinse foam and felt filters; air dry completely.
3. Clear brushroll: Remove hair and debris; check for damage.
4. Inspect hose: Remove clogs if suction reduces.

CAUTION! Do not use damaged filters or brushroll. Ensure all parts are dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 30 minutes if overheated.

Service: 1-800-798-7398; www.sharkclean.com