Shark R-WD261 Vacuum Cleaner Manual

The Shark R-WD261 is a versatile upright vacuum cleaner featuring a powerful motor, advanced swivel steering, a lift-away canister mode for above-floor cleaning, a HEPA filter system for allergen capture, multiple attachments for various surfaces, and a large-capacity dust cup. It is designed for deep cleaning of carpets, hard floors, and above-floor areas. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright body with swivel steering, Lift-Away canister, Motorized brushroll, HEPA filter, Dust cup with empty-release button, On-board attachment holder, Power cord with wrap.

Feature	Description
Swivel Steering	For easy maneuverability around furniture and obstacles
Lift-Away Mode	Detachable canister for cleaning stairs, furniture, and above-floor areas
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
HEPA Filter	Captures 99.9% of dust and allergens
Dust Cup Release	One-touch button for easy emptying
On-board Attachments	Storage for crevice tool, upholstery tool, and dusting brush
Power Switch	Turns vacuum on/off
Brushroll On/Off	Disengages brushroll for hard floor cleaning
Cord Wrap	Integrated hooks for power cord storage
Handle Controls	Easy access to power and brushroll settings

Assembly & Setup

Unpack and inspect all parts. Assemble according to instructions.

Attach handle: Insert handle into upright body until it clicks securely.
Install attachments: Clip crevice tool, upholstery tool, and dusting brush onto on-board holder.
Insert HEPA filter: Place filter into compartment at back of dust cup.
Unwrap power cord: Extend cord fully before first use.

WARNING! Ensure all parts are securely connected before operation. Keep fingers away from brushroll during assembly.

First-Time Use

Plug into a standard 120V outlet; turn on power switch.

Select mode: Use upright mode for floors; detach canister for above-floor cleaning.
Adjust brushroll: Turn brushroll ON for carpets; OFF for hard floors.
Begin vacuuming: Push vacuum forward and back in slow, overlapping strokes.
Empty dust cup: Press release button when full; dispose of debris.

CAUTION! Do not vacuum wet spills, large objects, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model: Shark R-WD261.
Power Source: 120V AC, 60Hz.
Motor: Advanced suction motor with sealed system.
Filtration: HEPA filter captures 99.9% of dust and allergens.
Dust Cup Capacity: 1.5 quarts.
Cord Length: 25 feet.
Attachments: Crevice tool, upholstery tool, dusting brush.
Weight: 14.5 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Access controls via handle and body. Handle: POWER switch, BRUSHROLL ON/OFF button. Body: LIFT-AWAY release button, DUST CUP release.

Operation Modes: Upright mode for floors; Lift-Away mode for stairs and furniture. Brushroll Settings: ON for carpets; OFF for hard floors to prevent scattering debris. Suction Control: Automatic adjustment based on floor type.

Using Attachments

Attachments stored on-board for quick access.

Detach canister: Press release button to separate from upright body.
Select tool: Choose crevice tool for tight spaces; upholstery tool for furniture; dusting brush for surfaces.
Connect tool: Insert into hose end until secure.
Clean: Use gentle back-and-forth motions.

Tip: For high-reach areas, use extension wand (sold separately).

Cleaning Modes

Supports multiple cleaning configurations.

Upright Mode: For carpets and large floor areas; engage brushroll.
Lift-Away Mode: Detach canister to clean stairs, under furniture, and ceilings.
Above-Floor Cleaning: Use hose and attachments for curtains, blinds, and shelves.
Hard Floor Setting: Turn brushroll OFF to prevent debris scatter.

WARNING! Do not use attachments to vacuum water or liquids. Keep rotating brushroll away from cords and curtains.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: After each use or when full.
Clean filter: Rinse HEPA filter under cold water monthly; air dry 24 hours before reinstalling.
Clear brushroll: Remove hair and debris from brushroll weekly.
Check for blockages: Inspect hose and attachments if suction decreases.

CAUTION! Unplug vacuum before maintenance. Do not operate with wet filter.

Safety Information

Read all instructions before use. Keep away from children. Do not use if cord or plug is damaged. Avoid vacuuming flammable materials.

Important: This appliance is for household use only. Do not use outdoors or on wet surfaces.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup or clog	Empty dust cup; check hose and attachments for blockages.
Brushroll not spinning	Obstruction or belt issue	Clear debris from brushroll; inspect belt for wear.
Vacuum won't turn on	Power source or switch	Check outlet; ensure power switch is ON; inspect cord.
Unusual noise	Foreign object in brushroll or motor	Turn off and unplug; remove object from brushroll or intake.
Canister not detaching	Release button stuck	Press firmly; ensure vacuum is upright and not locked.

Reset: Unplug for 10 minutes if motor overheats.

Service: 1-800-798-7398; sharkclean.com