Shark R-WD260 Vacuum Cleaner Manual

The Shark R-WD260 is a versatile upright vacuum cleaner with advanced duoclean technology, designed for both carpets and hard floors. It features a lightweight yet powerful design, swivel steering for easy maneuverability, LED headlights for visibility under furniture, a large-capacity dust cup with anti-allergen complete seal technology, and multiple cleaning modes. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 7. Maintenance & Cleaning 8. Storage & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: DuoClean PowerFins brushroll, LED headlights, Swivel steering, Large-capacity dust cup, Anti-Allergen Complete Seal, Multi-surface cleaning modes.

Feature	Description
DuoClean PowerFins	Dual brushroll system for carpets and hard floors
LED Headlights	Illuminates under furniture and in dark areas
Swivel Steering	Allows easy maneuverability around obstacles
Large Dust Cup	High-capacity, easy-empty dust cup
Anti-Allergen Seal	Traps 99.9% of dust and allergens inside
Cleaning Modes	Hard Floor, Carpet, and Boost modes
Attachments	Crevice tool, dusting brush, upholstery tool
Power Cord	25-foot retractable cord
Washable Filters	Foam and felt filters for easy maintenance
Handle Controls	Power switch, mode selector, cord rewind

Assembly & Setup

Unpack and inspect all parts. Assemble according to instructions.

Attach handle: Align handle with body and secure with provided screws.
Install hose and wand: Connect hose to vacuum body and attach wand.
Attach cleaning tools: Store tools on onboard caddy or attach as needed.
Plug into AC power outlet.

WARNING! Ensure all parts are securely fastened before use. Keep fingers away from moving parts.

First-Time Use

Before first use, ensure filters are installed and dust cup is empty.

Select cleaning surface: Choose Hard Floor or Carpet mode via selector.
Adjust suction: Use Boost mode for deep cleaning if needed.
Begin cleaning: Turn on power switch and vacuum in overlapping passes.
Empty dust cup: Press release button and empty contents into trash.

CAUTION! Do not vacuum large objects, liquids, or hot ashes to avoid damage.

Specifications

Model: Shark R-WD260.
Type: Upright vacuum cleaner.
Power Source: 120V AC, 60Hz.
Cord Length: 25 feet retractable.
Dust Cup Capacity: 1.5 quarts.
Filtration: Anti-Allergen Complete Seal with washable filters.
Brushroll: DuoClean PowerFins technology.
Weight: 14.5 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Handle-mounted controls: Power switch, Mode selector (Hard Floor/Carpet/Boost), Cord rewind button.

Indicator Lights: LED headlights, filter check light, full dust cup indicator.

Mode Selection: Hard Floor for tiles/wood; Carpet for low-pile carpets; Boost for maximum suction. Cord Management: Press rewind button to retract cord automatically. Filter Maintenance: Wash foam and felt filters monthly.

Cleaning Modes & Attachments

Use appropriate mode and attachments for different surfaces.

Hard Floor Mode: Activates soft brushroll for gentle cleaning.
Carpet Mode: Engages bristle brushroll for deep carpet cleaning.
Boost Mode: Increases suction power for tough messes.
Attachments: Crevice tool for tight spaces; dusting brush for surfaces; upholstery tool for furniture.

Tip: Turn off vacuum before switching modes or attaching tools.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup: After each use or when full.
Clean brushroll: Remove hair and debris monthly.
Wash filters: Rinse foam and felt filters under water every month; air dry completely.
Check for blockages: Inspect hose, wand, and nozzle if suction decreases.
Inspect belt: Replace if worn or damaged (every 6-12 months).

WARNING! Unplug vacuum before performing any maintenance. Do not use damaged parts.

Storage & Care

Store in a dry, cool place. Wrap cord around hooks.

CAUTION! Do not store vacuum with wet filters. Keep away from heat sources.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check power cord connection; try different outlet.
Loss of suction	Full dust cup/blockage	Empty dust cup; check hose, wand, and brushroll for clogs.
Brushroll not spinning	Debris/belt issue	Clear debris from brushroll; inspect and replace belt if needed.
Overheating	Blocked filters/airflow	Clean filters; ensure dust cup is empty; allow vacuum to cool.
Unusual noise	Foreign object in brushroll	Turn off and unplug; remove object from brushroll or hose.

Reset: Unplug for 30 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com