Shark R-IR141 Vacuum Cleaner Manual

The Shark R-IR141 is a powerful upright vacuum cleaner designed for deep carpet cleaning and versatile floor care. It features a Lift-Away® pod for portable above-floor cleaning, Anti-Allergen Complete Seal Technology with a HEPA filter, a motorized brushroll for carpets and hard floors, multiple suction settings, a large-capacity dust cup, LED headlights, and a variety of attachments for comprehensive cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motorized brushroll, Lift-Away pod, Dust Cup with HEPA filter, Handle with controls, Hose, Wand, and Cleaning Attachments.

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Attach Handle: Slide the handle onto the main body until it clicks into place.
2. Install Wand: Insert the wand into the hose port on the front of the vacuum.
3. Attach Hose: Connect the hose to the port on the back of the vacuum body.
4. Install Floor Nozzle: Slide the motorized floor nozzle onto the wand until it locks.
5. Check Filters: Ensure both the pre-motor and HEPA filters are correctly seated.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug the power cord into a standard 120V AC outlet.

1. Select Floor Setting: Use the suction control dial on the handle (Carpet, Hard Floor, etc.).
2. Power On: Press the POWER button on the handle.
3. Engage Brushroll: Ensure the brushroll is ON for carpets; turn OFF for hard floors or delicate rugs.
4. Begin Cleaning: Push the vacuum forward and back in slow, overlapping strokes.
5. Empty Dust Cup: When full, unplug the vacuum and press the release button to empty the cup.

CAUTION! Keep hair, loose clothing, and fingers away from the brushroll and openings.

Specifications

• Model: Shark R-IR141.
• Type: Upright Vacuum with Lift-Away®.
• Technology: Anti-Allergen Complete Seal with HEPA filter.
• Brushroll: Motorized, auto-adjusting for carpets/hard floors.
• Suction Control: Multiple settings (Carpet, Hard Floor, etc.).
• Dust Cup Capacity: 1.2 dry quarts.
• Cord Length: 25 feet.
• Attachments: Crevice tool, dusting brush, upholstery tool, pet multi-tool.
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.

Controls and Settings

Main controls located on the handle and body. Handle: POWER button, Suction Control dial, Brushroll On/Off switch. Body: Lift-Away release button, Dust Cup release, Hose port.

Settings: Suction Control (adjust for carpet pile or hard floors), Brushroll (On for carpets, Off for hard floors/delicate rugs).

LED Lights: Automatically illuminate when vacuum is powered on. Hose & Wand: Detach for above-floor cleaning with attachments.

Using Attachments

For above-floor cleaning: stairs, upholstery, ceilings, tight spaces.

1. Detach the hose and wand from the main body.
2. Select an attachment (crevice tool, dusting brush, etc.) and click it onto the end of the wand or hose.
3. Use the suction control on the handle to adjust power as needed.
4. Clean the area, then detach and store the attachment.

Tip: For best results on upholstery, use the upholstery tool with the brushroll switched OFF.

Lift-Away Mode

Detach the pod for portable cleaning of stairs, furniture, and other above-floor areas.

1. Ensure the vacuum is powered OFF and unplugged.
2. Press the Lift-Away release button on the back of the vacuum body.
3. Lift the pod away from the floor nozzle and wand.
4. Carry the pod by its handle; the hose remains connected for cleaning.
5. To reattach, align the pod with the main body and push down until it clicks.

WARNING! Do not use Lift-Away mode on stairs while the vacuum is plugged in. Keep cord clear of steps.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

• Empty Dust Cup: Press release button; empty contents into trash; reattach.
• Clean Filters: Rinse pre-motor filter monthly and HEPA filter every 3 months under tap water; air dry completely for 24 hours before reinstalling.
• Clear Brushroll: Regularly remove hair and debris wrapped around the brushroll using the cleaning tool or scissors.
• Check Hose & Wand: Remove clogs by disassembling and clearing obstructions.

CAUTION! Always unplug the vacuum before maintenance. Never use the vacuum without all filters installed and completely dry.

Storage & Care

Store in a cool, dry place. Wrap cord around cord hooks on the back.

CAUTION! Do not store near heat sources or with a wet dust cup/filters. Keep out of reach of children.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark, Lift-Away, and Anti-Allergen Complete Seal are trademarks of SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds, then plug back in.

Service: 1-800-798-7398; www.sharkclean.com