Shark QU202Q Vacuum Cleaner Manual

The Shark QU202Q is a versatile upright vacuum cleaner featuring powerful suction, a multi-surface brush roll, advanced swivel steering, a large-capacity dust cup, HEPA filtration, and multiple cleaning modes for carpets and hard floors. It includes attachments for above-floor cleaning and upholstery. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright body with motorized brush roll, Swivel steering handle, Large-capacity dust cup with HEPA filter, On-board attachment holder, Power cord with wrap, and various cleaning tools.

Feature	Description
Motorized Brush Roll	Automatically adjusts between carpets and hard floors
Swivel Steering	Provides 180-degree maneuverability around furniture
Large Dust Cup	Easy-empty, 1.2-quart capacity
HEPA Filtration	Traps 99.9% of dust and allergens
Cleaning Modes	Carpet, Hard Floor, and Bare Floor settings
On-Board Tools	Includes crevice tool, dusting brush, and upholstery tool
Power Cord	25-foot cord with automatic rewind
LED Headlights	Illuminates hidden dirt under furniture
Handle Controls	Power switch, brush roll on/off, suction adjustment
Washable Filters	Both pre-motor and post-motor filters are washable

Assembly & Setup

Unpack and inspect all contents. Assemble according to instructions.

Attach handle: Insert handle into upright body until it clicks securely.
Install dust cup: Slide dust cup into place until it locks.
Insert filters: Place pre-motor and HEPA filters into their compartments.
Attach hose and wand: Connect hose to vacuum body and wand to hose.
Mount attachments: Clip crevice tool and brush onto on-board holder.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

Select surface type: Use brush roll switch for carpets or hard floors.
Adjust suction: Use suction control on handle for delicate rugs.
Begin cleaning: Push vacuum forward and back in overlapping strokes.
Empty dust cup: Press release button and empty when full.
Use attachments: Detach wand and tools for above-floor cleaning.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll. Do not vacuum wet spills.

Specifications

Model: Shark QU202Q Upright Vacuum.
Power: 120V, 60Hz, 12 Amps.
Suction Power: Adjustable via suction control dial.
Dust Cup Capacity: 1.2 quarts.
Filtration: HEPA filter with anti-allergen seal.
Cord Length: 25 feet with cord wrap.
Brush Roll: Auto-adjusting for multiple surfaces.
Attachments: Crevice tool, dusting brush, upholstery tool.
Weight: 15.4 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Handle-mounted controls for easy operation.

Power Switch: Turns vacuum on/off. Brush Roll Switch: Turns brush roll on for carpets, off for hard floors. Suction Control: Adjusts suction power (Low/Medium/High). LED Lights: Automatically illuminate in dark areas. Cord Rewind: Press button to retract cord.

Cleaning Modes: Carpet mode (brush roll on), Hard Floor mode (brush roll off), Bare Floor setting (reduced suction).

Using Attachments

Detach wand and tools for above-floor cleaning.

Turn off vacuum and unplug before changing attachments.
Remove wand: Press release button on vacuum body.
Attach tool: Insert crevice tool, dusting brush, or upholstery tool into wand.
Clean: Use for furniture, stairs, ceilings, and tight spaces.
Return tools: Clip back onto on-board holder after use.

Tip: Use upholstery tool for sofas and curtains; crevice tool for corners and edges.

Cleaning Modes

Optimize cleaning for different surfaces.

Carpet Mode: Brush roll on for deep cleaning fibers.
Hard Floor Mode: Brush roll off to prevent scattering debris.
Bare Floor Setting: Reduced suction for delicate surfaces.
Above-Floor Cleaning: Use attachments with suction control.
LED Lights: Automatically activate under furniture.

WARNING! Do not use carpet mode on hard floors as it may damage surface or vacuum.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: After each use or when full.
Clean filters: Wash pre-motor and HEPA filters every 3 months.
Check brush roll: Remove tangled hair and debris monthly.
Inspect hose: Clear clogs with long object if suction decreases.
Store properly: Wrap cord, store in dry area.

CAUTION! Unplug before maintenance. Allow filters to dry completely before reinserting.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup or clog	Empty dust cup; check hose and brush roll for blockages.
Brush roll not spinning	Tangled debris or belt	Turn off, unplug, and remove hair/wrap from brush roll.
Vacuum won't turn on	Power cord or outlet	Check plug connection; try different outlet; inspect cord for damage.
Overheating	Clogged filters or full dust cup	Clean filters; empty dust cup; allow vacuum to cool for 45 minutes.
Unusual noise	Foreign object in brush roll or hose	Turn off immediately; remove object from brush roll or hose.

Reset: Unplug for 45 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com