Shark QS100QRD Vacuum Cleaner Manual

The Shark QS100QRD is a versatile cordless stick vacuum cleaner featuring powerful suction, a lightweight design, multiple cleaning modes, a detachable handheld unit, HEPA filtration, LED headlights, and a rechargeable lithium-ion battery. It is designed for quick cleanups and deep cleaning on various surfaces including carpets, hard floors, and above-floor areas. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 7. Maintenance & Care 8. Battery & Charging 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body, detachable handheld unit, charging dock, wall mount, crevice tool, dusting brush, motorized floor nozzle, and HEPA filter.

Feature	Description
Power Button	Turns vacuum on/off; cycles through power modes
Battery Indicator	LED lights show remaining battery charge
Release Button	Detaches handheld unit from stick
Dust Cup Release	Opens dust cup for emptying
Charging Port	For connecting charger or docking station
LED Headlights	Illuminates dark areas under furniture
HEPA Filter	Captures 99.9% of dust and allergens
Motorized Floor Nozzle	Automatically adjusts between carpets and hard floors
Wand Lock	Secures extension wand in place
Handheld Mode	Converts to portable vacuum for above-floor cleaning

Assembly & Setup

Unpack all parts and inspect for damage. Assemble before first use.

Attach wand: Insert wand into main body until it clicks.
Attach floor nozzle: Connect motorized nozzle to wand end.
Install filter: Ensure HEPA filter is properly seated in dust cup.
Charge battery: Connect charger to vacuum or dock; charge fully (approx. 4 hours).
Mount dock (optional): Secure wall mount using included screws.

WARNING! Do not use if any parts are damaged. Ensure all connections are secure before operation.

First-Time Use

Fully charge battery before initial use. Familiarize yourself with controls.

Power on: Press Power button; LED indicator will illuminate.
Select mode: Press Power button repeatedly to cycle through Eco, Normal, and Max modes.
Begin cleaning: Push vacuum forward on floor; motorized brush will engage automatically.
Switch to handheld: Press release button to detach handheld unit for stairs or upholstery.
Empty dust cup: Press release button over trash bin; clean filter monthly.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll and openings.

Specifications

Model: Shark QS100QRD.
Type: Cordless stick vacuum with handheld option.
Battery: Rechargeable lithium-ion, 22.2V.
Run Time: Up to 40 minutes (Eco mode), 20 minutes (Max mode).
Charging Time: Approximately 4 hours.
Filtration: HEPA filter, washable.
Dust Cup Capacity: 0.5 liters.
Weight: 5.5 lbs (2.5 kg).
Noise Level: ≤75 dB.
Attachments: Crevice tool, dusting brush, motorized floor nozzle.

Controls and Settings

Main controls located on handle. Power Button: Turns on/off, cycles modes (Eco → Normal → Max). Battery Indicator: 3 LEDs (green = high, yellow = medium, red = low). Release Button: Separates handheld unit. Dust Cup Release: Latch to empty cup.

Cleaning Modes: Eco (extended runtime, lower suction), Normal (balanced cleaning), Max (maximum suction for deep cleaning).

LED Headlights: Automatically turn on when vacuum is powered.

Cleaning Modes & Attachments

Use appropriate mode and attachment for each cleaning task.

Hard floors: Use motorized floor nozzle in Normal mode.
Carpets: Use motorized floor nozzle; Max mode for deep pile.
Above-floor cleaning: Detach handheld unit; attach crevice tool or dusting brush.
Upholstery: Use handheld with upholstery tool (if included) or dusting brush.
Stairs: Use handheld unit for easy maneuverability.

Tip: Clear area of large debris before vacuuming to prevent clogging.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

Empty dust cup after each use.
Clean filter monthly: Rinse under cold water, air dry 24 hours before reinstalling.
Check brush roll for tangled hair or fibers; cut and remove as needed.
Inspect nozzle and wand for blockages.
Wipe exterior with damp cloth; do not immerse in water.

WARNING! Unplug charger and ensure vacuum is off before maintenance. Do not use damaged parts.

Battery & Charging

Use only provided charger. Charge fully before first use.

Charging: Connect charger to port on vacuum or dock. Indicator flashes during charge, solid when full. Storage: Store in cool, dry place. If not using for extended period, charge to 50% every 3 months. Battery life: Approximately 500 charge cycles. Replace battery if run time decreases significantly.

CAUTION! Do not expose battery to extreme temperatures or fire. Do not attempt to disassemble.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398. Dispose of battery according to local regulations; do not dispose in household trash.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery depleted	Charge battery fully; ensure charger is connected properly.
Reduced suction	Full dust cup/clogged filter	Empty dust cup; clean filter; check for blockages in nozzle/wand.
Brush roll not spinning	Tangled debris	Turn off vacuum; remove debris from brush roll.
Battery not charging	Faulty connection	Check charger and port for damage; try different outlet.
Vacuum turns off during use	Overheating/battery low	Allow to cool for 30 minutes; recharge battery.

Reset: Turn off, remove battery for 1 minute, reinsert and charge.

Service: 1-800-798-7398; www.sharkclean.com