Shark QS100QBL Vacuum Cleaner Manual

The Shark QS100QBL is a lightweight, cordless stick vacuum cleaner featuring a powerful motor, multi-surface brushroll, LED headlights, swivel steering, and a detachable handheld pod for above-floor cleaning. It includes a rechargeable lithium-ion battery, wall-mounted charging dock, and various attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Battery & Charging 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Detachable handheld pod, Multi-surface brushroll with LED lights, Swivel steering handle, Wall-mounted charging dock, Crevice tool, Dusting brush, Upholstery tool.

FeatureDescription
Power buttonTurns vacuum on/off; toggles between power modes
Brushroll switchActivates/deactivates brushroll for different surfaces
Release buttonDetaches handheld pod from stick
LED headlightsIlluminates dark areas under furniture
Swivel steeringProvides maneuverability around obstacles
Dust cup releaseOpens dust cup for emptying
Charging dockWall-mounted station for storage and charging
Battery indicatorLED lights show remaining battery charge
Washable filterReusable foam and felt filter system
AttachmentsCrevice tool, dusting brush, upholstery tool included

Assembly & Setup

Unpack and inspect all components. Assemble before first use.

  1. Attach handle: Insert handle into main body until it clicks securely.
  2. Install charging dock: Mount on wall using provided screws; ensure near outlet.
  3. Charge battery: Place vacuum on dock; charge fully before first use (approx. 4 hours).
  4. Attach tools: Store attachments on dock or vacuum body as designed.

WARNING! Keep charging dock away from water. Ensure secure wall mounting to prevent falling.

First-Time Use

Ensure vacuum is fully charged. Power on and begin cleaning.

  1. Select surface type: Use brushroll switch for carpets (ON) or hard floors (OFF).
  2. Adjust power mode: Press power button to toggle between standard and max suction.
  3. Empty dust cup: Press release button to remove and empty when full.
  4. Use attachments: Detach handheld pod for above-floor cleaning with tools.

CAUTION! Do not vacuum large debris, liquids, or hot ashes. Keep hair and strings away from brushroll.

Specifications

Controls and Settings

Power button: Turns on/off; press again to switch between standard and max suction. Brushroll switch: Toggle ON for carpets, OFF for hard floors. Release button: Detaches handheld pod. Battery indicator: Three LEDs show charge level (green=high, yellow=medium, red=low).

Cleaning Modes: Standard (balanced suction and runtime), Max (maximum suction for deep cleaning).

Maintenance alerts: LED flashes red when filter needs cleaning or brushroll is clogged.

Using Attachments

Detach handheld pod by pressing release button. Attach tools to nozzle.

  1. Crevice tool: For tight spaces, corners, between cushions.
  2. Dusting brush: For delicate surfaces, blinds, shelves.
  3. Upholstery tool: For sofas, chairs, stairs.

Tip: Ensure pod is securely clicked into place before use. Store attachments on charging dock.

Cleaning Modes

Vacuum adapts to different surfaces and cleaning needs.

  1. Hard floors: Turn brushroll OFF to prevent scattering debris.
  2. Carpets: Turn brushroll ON to agitate and deep clean fibers.
  3. Above-floor: Detach handheld pod for furniture, ceilings, cars.
  4. Max mode: Use for high-traffic areas or embedded dirt (reduces runtime).

WARNING! Do not use on wet surfaces. Avoid vacuuming sharp objects that may damage brushroll.

Battery & Charging

Lithium-ion battery provides cordless operation. Charge fully before first use.

  1. Charging: Place vacuum on wall dock; indicator LEDs will pulse during charge.
  2. Run time: Up to 40 minutes standard, 15 minutes max mode (varies with surface).
  3. Battery care: Avoid complete discharge; store in cool, dry place.
  4. Replacement: Contact Shark Customer Service for battery replacement if needed.

CAUTION! Use only Shark-approved charger. Do not expose battery to fire or extreme temperatures.

Care & Maintenance

Regular maintenance ensures optimal performance.

  1. Empty dust cup: After each use; press release button to remove and empty.
  2. Clean filter: Rinse foam and felt filter every 3 months; air dry 24 hours before reuse.
  3. Clear brushroll: Remove hair and debris from brushroll monthly.
  4. Check for blockages: Inspect hose and nozzle if suction decreases.

WARNING! Unplug charger and remove battery before maintenance. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery dead/not chargedPlace on charger; ensure dock is powered. Check battery indicator.
Reduced suctionFull dust cup/clogEmpty dust cup; check hose and nozzle for blockages; clean filter.
Brushroll not spinningSwitch OFF/cloggedTurn brushroll switch ON; remove debris from brushroll ends.
Battery not chargingFaulty connectionEnsure vacuum is properly seated on dock; try different outlet.
LED lights flashing redFilter needs cleaningRemove and rinse filter; air dry completely before reinstalling.

Reset: Remove battery for 10 minutes, then reinstall and charge.

Service: 1-800-798-7398; sharkclean.com

Shark QS100QBL Vacuum Cleaner Manual © - All Rights Reserved 2025