Shark QS100QBK Vacuum Cleaner Manual

The Shark QS100QBK is a lightweight, corded stick vacuum cleaner featuring powerful suction, a multi-surface brushroll, LED headlights, a large dust cup with easy-empty mechanism, and versatile cleaning modes for floors and above-floor surfaces. It includes a crevice tool, dusting brush, and upholstery tool. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized brushroll, LED headlights, Large-capacity dust cup, Wand release button, Power cord with wrap, Handle with controls, Tool storage caddy.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach wand to vacuum body: Align arrows and push until click is heard.
2. Insert handle into wand: Align tabs and secure with locking mechanism.
3. Attach floor nozzle: Slide onto wand end until it clicks into place.
4. Plug power cord into wall outlet (120V, 60Hz).

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers clear of moving parts.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

1. Select surface setting: Use switch on handle for CARPET or HARD FLOOR.
2. Turn on: Press ON/OFF switch; LED headlights will illuminate.
3. Begin cleaning: Push vacuum forward and back in overlapping strokes.
4. Empty dust cup: Press release button when full; dispose of debris.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep cord away from brushroll.

Specifications

• Model: Shark QS100QBK.
• Type: Corded stick vacuum.
• Suction Power: Adjustable via surface settings.
• Dust Cup Capacity: 0.7 dry quarts.
• Cord Length: 25 feet.
• Weight: 7.5 lbs.
• Brushroll: Motorized with anti-hair wrap.
• Filters: Washable foam and felt.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Power Source: 120V AC, 60Hz.

Controls and Settings

Handle controls: ON/OFF switch, Surface selector (Carpet/Hard Floor).

Indicators: Brushroll LED (red when jammed), Power LED (blue when on).

Suction Control: Automatic adjustment based on surface setting. Wand Release: Button near handle to detach for handheld use. Dust Cup Release: Button on body to empty container. Cord Wrap: Hooks on rear for neat storage.

Attachments & Accessories

Included tools: Crevice Tool, Dusting Brush, Upholstery Tool.

1. Attach tools: Remove floor nozzle; insert tool into wand or handle end.
2. For above-floor cleaning: Use handheld mode with appropriate attachment.
3. Store tools: Place in caddy on vacuum body when not in use.

Tip: Use crevice tool for tight spaces; dusting brush for shelves; upholstery tool for furniture.

Cleaning Modes & Techniques

Supports carpet, hard floor, and handheld cleaning.

1. Carpet mode: Select CARPET setting; use slow, overlapping passes.
2. Hard floor mode: Select HARD FLOOR setting; brushroll spins for debris pickup.
3. Handheld mode: Press wand release; attach tool directly to handle.
4. Under furniture: LED headlights illuminate hidden dirt.
5. Empty dust cup: When debris reaches MAX line; press release over trash.
6. Clean brushroll: Turn off and unplug; remove nozzle to clear obstructions.

WARNING! Do not use on wet surfaces. Avoid vacuuming cords or loose objects.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use.
2. Clean filters monthly: Rinse under water; air dry 24 hours before reinstalling.
3. Check brushroll weekly: Remove hair or string wrapped around roller.
4. Inspect power cord: Do not use if damaged.
5. Store in dry location: Use cord wrap; store attachments in caddy.

CAUTION! Unplug before maintenance. Do not use without filters installed.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 45 minutes to reset thermal protection.

Service: 1-800-798-7398; sharkclean.com