Shark Pursuit V209AF Vacuum Cleaner Manual

The Shark Pursuit V209AF is a lightweight, corded stick vacuum cleaner designed for quick cleanups on hard floors and low-pile carpets. It features a motorized brush roll, a 2-in-1 dusting crevice tool, a washable filter, a 25-foot power cord, and a floor nozzle that converts to a handheld vacuum. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Using the Vacuum 7. Maintenance & Cleaning 8. Storage 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight stick body, Motorized Floor Nozzle, 2-in-1 Dusting Crevice Tool, Washable Foam and Felt Filter, 25-foot Power Cord, On-Board Tool Caddy.

Feature	Description
Motorized Brush Roll	Agitates and lifts dirt from carpets and hard floors
2-in-1 Dusting Crevice Tool	Converts between a brush and a crevice tool for versatile cleaning
Washable Filter	Foam and felt filter; can be rinsed and reused
25-foot Power Cord	Provides extended reach without changing outlets frequently
Convertible Design	Floor nozzle detaches to become a handheld vacuum
On-Board Tool Caddy	Holds the 2-in-1 tool on the vacuum for easy access
Lightweight Body	Easy to carry and maneuver
Corded Power	Consistent suction; no batteries to recharge
Dirt Cup	Easy-empty container; no bags required
Power Switch	Simple on/off control on the handle

Assembly & Setup

Unpack all parts from the box. Ensure you have the main body, floor nozzle, 2-in-1 tool, and power cord.

Attach the handle: Slide the upper handle onto the main body until it clicks into place.
Connect the floor nozzle: Align the nozzle with the bottom of the main body and push until it locks.
Install the filter: Place the washable foam and felt filter into the filter compartment at the front of the dirt cup.
Attach the 2-in-1 tool: Clip it onto the on-board caddy on the main body.
Plug in the power cord: Connect to a standard 120V household outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Do not force parts together.

First-Time Use

Before first use, ensure the filter is installed and the dirt cup is empty.

Plug the power cord into an outlet.
Flip the power switch on the handle to the "I" (ON) position.
Begin vacuuming floors using the floor nozzle. The motorized brush roll will activate automatically.
For above-floor cleaning, detach the floor nozzle by pressing the release button and use the handheld unit with the 2-in-1 tool.
After use, turn off the vacuum and unplug it.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair, loose clothing, and fingers away from the brush roll.

Specifications

Model: Shark Pursuit V209AF.
Type: Corded Stick Vacuum.
Power Source: 120V, 60Hz, AC.
Cord Length: 25 feet.
Filter: Washable Foam and Felt Filter.
Dirt Capacity: 0.7 dry quarts.
Brush Roll: Motorized, anti-hair wrap design.
Weight: 7.5 lbs.
Included Tools: 2-in-1 Dusting Crevice Tool.
Warranty: 5-year limited warranty.

Controls and Parts

Main Controls: Power Switch (On/Off) on the handle. Release Buttons for detaching the floor nozzle and dirt cup.

Key Parts: Main Body with Handle, Motorized Floor Nozzle, Dirt Cup, Washable Filter, 2-in-1 Tool, Power Cord, On-Board Tool Caddy.

Operation: Simply plug in, turn on, and push the vacuum forward. The floor nozzle swivels for maneuverability. To convert to handheld, press the nozzle release button and lift the main body away.

Using the Vacuum

For best results, clear the floor of large debris before vacuuming.

Floors: Use the floor nozzle on hard floors and low-pile carpets. The brush roll automatically adjusts.
Above-Floor Cleaning: Detach the floor nozzle. Attach the 2-in-1 tool to the hose for dusting shelves, blinds, or cleaning crevices.
Emptying the Dirt Cup: Unplug the vacuum. Press the dirt cup release button, remove the cup, and empty contents into trash. Reinstall until it clicks.
Cord Management: Use the cord hook on the back of the vacuum to wrap the cord when not in use.

Tip: For optimal suction, empty the dirt cup when it reaches the "MAX" line and clean the filter regularly.

Maintenance & Cleaning

Regular maintenance ensures peak performance.

Filter Cleaning: Unplug vacuum. Remove the filter compartment cover and take out the foam and felt filter. Rinse under lukewarm water until water runs clear. Let air dry completely for 24 hours before reinstalling.
Brush Roll Care: Regularly check the brush roll for tangled hair or fibers. Use scissors to carefully cut and remove any debris wrapped around the roll.
Cleaning the Dirt Cup: Empty after each use. The cup can be rinsed with water if needed. Ensure it is completely dry before reattaching.
Inspecting the Hose: Check for clogs if suction is reduced. Detach the floor nozzle and look through the hose for blockages.

WARNING! Always unplug the vacuum before performing any maintenance. Do not operate with a wet filter.

Storage

Store the vacuum in a cool, dry place.

Unplug and wrap the power cord around the cord hooks.
Ensure the dirt cup is empty and the filter is dry.
Store upright or hang using the storage hook on the back of the handle.
Keep the 2-in-1 tool attached to the caddy.

CAUTION! Do not store the vacuum with a damp filter or dirt cup, as this can cause odors or mold.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark and Pursuit are trademarks of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Not plugged in / Power switch off	Ensure the power cord is securely plugged into an outlet. Flip the power switch to ON (I).
Loss of suction	Full dirt cup / Clog / Dirty filter	Empty the dirt cup. Check hose and nozzle for clogs. Clean or replace the filter.
Brush roll not spinning	Tangled debris / Obstruction	Unplug the vacuum. Inspect the brush roll and remove any wrapped hair or fibers.
Unusual noise	Foreign object in brush roll or hose	Unplug immediately. Inspect the brush roll and air path for obstructions like coins or paperclips.
Vacuum overheats	Clogged filter or full dirt cup	Turn off and unplug. Let cool for 60 minutes. Empty dirt cup and clean filter before resuming.

Reset: If the vacuum overheats and shuts off, unplug it, let it cool for one hour, empty the dirt cup, clean the filter, and ensure all air paths are clear before restarting.

Service: 1-800-798-7398; sharkclean.com