Shark Pursuit UV209T Vacuum Cleaner Manual

The Shark Pursuit UV209T is a lightweight, cordless stick vacuum cleaner featuring UV-C light sanitization technology, a HEPA filtration system, multiple cleaning modes (Eco, Normal, Max), a removable and rechargeable battery, LED headlights, a motorized brushroll, and a versatile 2-in-1 design for floor and above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, Removable battery pack, Charging dock, Motorized brushroll with LED lights, UV-C sanitization module, HEPA filter, Crevice tool, Dusting brush, and Upholstery tool.

Assembly & Setup

Unpack all parts and inspect for damage. Assemble on a clean, flat surface.

1. Attach the handle: Insert the handle into the main body until it clicks securely.
2. Install the battery: Slide the battery pack into the slot on the back until it locks.
3. Mount the charging dock: Use included screws to mount dock on wall, or place on stable surface.
4. Attach accessories: Clip crevice tool, dusting brush, or upholstery tool to dock or vacuum as needed.

WARNING! Ensure vacuum is powered off during assembly. Keep small parts away from children.

First-Time Use

Fully charge the battery before first use.

1. Charge: Place vacuum on dock; charging indicator will light. Full charge takes approx. 4 hours.
2. Power on: Press the power button; select cleaning mode (Eco, Normal, Max) using mode button.
3. Test UV light: Ensure UV-C light activates when brushroll touches floor (visible blue glow).
4. Empty dust cup: Press release button to remove cup; empty contents into trash.

CAUTION! Do not look directly at UV-C light. Keep away from eyes and skin.

Specifications

• Model: Shark Pursuit UV209T.
• Type: Cordless stick vacuum with handheld option.
• Battery: 25.2V Lithium-ion, removable, 4-hour charge time.
• Runtime: Up to 40 minutes (Eco), 25 minutes (Normal), 15 minutes (Max).
• Dust Cup Capacity: 0.7 liters, washable.
• Filtration: HEPA filter, washable.
• UV-C Light: Wavelength 253.7nm, sanitizes as you clean.
• Weight: 5.5 lbs (2.5 kg).
• Noise Level: ≤75 dB (Normal mode).
• Input: 100-240V AC, 50/60Hz for charging.

Controls and Settings

Main controls located on handle: Power button, Mode button (cycles Eco/Normal/Max), UV button (toggle UV light on/off), Battery indicator (LED shows charge level).

Indicators: Battery LED (green=high, yellow=medium, red=low, flashing=needs charge). UV light indicator (blue LED when active).

Settings: Eco mode for quiet, extended cleaning; Normal for everyday; Max for deep clean. UV light can be turned off for non-sanitizing vacuuming. Filter reset button after washing filter.

Attachments & Accessories

Included: Motorized brushroll, Crevice tool, Dusting brush, Upholstery tool, Charging dock, Extra HEPA filter.

1. To attach: Align accessory with port on vacuum or handheld; push until click.
2. To detach: Press release button and pull accessory away.
3. Storage: Dock has slots for tools; keep organized for quick access.

Tip: Use crevice tool for tight spaces; dusting brush for shelves; upholstery tool for furniture.

Cleaning Modes & UV Sanitization

UV-C light works in all modes when activated.

1. Select mode: Press MODE button to cycle; LED indicates current mode.
2. Activate UV: Press UV button; blue light confirms activation. Light turns off when vacuum is lifted from floor.
3. For best sanitization: Move vacuum slowly over surface to allow UV exposure.
4. Handheld mode: Detach pod from stick; use with tools for above-floor cleaning (UV available if attachment supports it).
5. Battery save: Use Eco mode for longer runtime; Max for quick deep clean.

WARNING! UV-C light is for surface sanitization only. Not a substitute for chemical disinfection. Avoid exposure to eyes and skin.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use: Press release, empty, reattach.
2. Clean brushroll monthly: Remove hair and debris; check for blockages.
3. Wash filters: Remove HEPA and pre-motor filter; rinse under cold water every 3 months. Air dry 24 hours before reuse.
4. Clean UV light window: Wipe with dry, soft cloth to maintain effectiveness.
5. Battery care: Store in cool, dry place; avoid complete discharge.

CAUTION! Unplug charger and remove battery before maintenance. Do not use wet filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for residential use. ICES-003: Complies with Canadian EMI standards. UV-C light complies with FDA performance standards. Copyright © 2025 SharkNinja Operating LLC. Shark and Pursuit are trademarks of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Remove battery for 30 seconds, reinsert to reset electronics.

Service: 1-800-798-7398; sharkclean.com