Shark PROFESSIONAL Rocket NV480Q Vacuum Cleaner Manual

The Shark PROFESSIONAL Rocket NV480Q is a versatile, lightweight corded stick vacuum with powerful suction, a motorized brushroll, DuoClean technology for carpets and hard floors, Anti-Allergen Complete Seal Technology with a HEPA filter, LED headlights, and a detachable pod for handheld cleaning. It includes various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with handle, motorized floor nozzle, wand, dust cup with HEPA filter, crevice tool, dusting brush, upholstery tool, and charging dock (if applicable).

Assembly & Setup

Unpack all parts and inspect for damage. Assemble on a clean, flat surface.

1. Attach the wand: Insert the wand into the main vacuum body until it clicks.
2. Attach the floor nozzle: Connect the floor nozzle to the wand until it locks.
3. Install the filter: Ensure the HEPA filter is properly seated in the dust cup.
4. Plug into a standard 120V AC outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, fully charge (if cordless) or plug in the vacuum.

1. Check filter installation: Ensure HEPA filter is correctly installed.
2. Select cleaning mode: Use the power switch to select desired suction level.
3. Test on a small area: Ensure brushroll is rotating and suction is working.
4. Empty dust cup: After first use, empty the dust cup to maintain suction.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

• Model: NV480Q.
• Type: Corded stick vacuum with handheld option.
• Suction Power: Powerful motorized suction.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Brushroll: Motorized, self-cleaning.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Dust Cup Capacity: 0.5 dry quarts.
• Power Source: 120V AC, 60Hz.
• Cord Length: 25 feet.
• Weight: 10.5 lbs.

Controls and Settings

Main controls located on the handle and body.

Handle: Power switch (Off/Low/High), release button for detachable pod.

Body: Dust cup release button, filter access door.

Settings: Suction power (Low for hard floors, High for carpets), brushroll on/off (auto), LED lights (auto-on). Maintenance: Empty dust cup indicator, filter check reminder.

Using Attachments

For above-floor cleaning: detach pod or use wand with tools.

1. Turn off and unplug vacuum before changing attachments.
2. Detach pod: Press release button on handle to remove handheld unit.
3. Attach tool: Connect desired tool to the handheld unit or wand end.
4. Select appropriate suction setting (Low for delicate surfaces).

Tip: Store attachments on the vacuum body for convenience.

Cleaning Modes

Designed for carpets, hard floors, and above-floor surfaces.

1. Floor cleaning: Use motorized floor nozzle; brushroll auto-engages on carpets.
2. Hard floor cleaning: DuoClean brushes gently clean without scattering debris.
3. Handheld mode: Detach pod for stairs, upholstery, and car interiors.
4. Above-floor cleaning: Use wand with attachments for ceilings, blinds, etc.

WARNING! Do not use on wet surfaces. Avoid vacuuming large, hard objects.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty when full or after each use.
2. Clean filter: Rinse HEPA filter under cold water every month; air dry 24 hrs.
3. Clear brushroll: Remove hair and debris from brushroll regularly.
4. Check for blockages: Inspect hose, wand, and nozzle for clogs.

CAUTION! Unplug before maintenance. Do not use damaged filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-798-7398; sharkclean.com