Shark PRO IR300 Series Vacuum Cleaner Manual

The Shark PRO IR300 Series is a high-performance commercial upright vacuum cleaner designed for professional cleaning environments. It features a powerful motor, advanced filtration system, large-capacity dust cup, adjustable suction settings, swivel steering, durable construction, and a range of specialized attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Maintenance & Cleaning 8. Filtration System 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Powerful motor, large dust cup, HEPA filtration, swivel steering, adjustable handle, onboard tool storage, and multiple cleaning modes.

Feature	Description
Powerful Motor	High-performance motor for deep cleaning on various surfaces
Large Dust Cup	Extra capacity for extended cleaning sessions
HEPA Filtration	Captures 99.97% of dust and allergens
Swivel Steering	Maneuvers easily around furniture and obstacles
Adjustable Suction	Multiple power settings for different floor types
Onboard Tools	Storage for crevice tool, dusting brush, and upholstery tool
LED Headlights	Illuminates dark areas under furniture
Brush Roll Control	On/Off switch for bare floors vs carpets
Quick-Release Wand	Easy transition to above-floor cleaning
Commercial Construction	Durable materials for professional use

Assembly & Setup

Unpack and inspect all components. Assemble following these steps.

Attach handle: Insert handle into vacuum body until it clicks securely.
Install wand: Insert wand into handle socket and lock in place.
Attach hose: Connect hose to vacuum port and secure with locking mechanism.
Install tools: Place attachments in onboard storage caddies.
Plug into appropriate power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, perform initial setup and check all functions.

Check filters: Ensure HEPA filter and pre-motor filter are properly installed.
Adjust settings: Set suction power appropriate for your flooring type.
Test brush roll: Turn brush roll on/off to ensure proper function.
Empty dust cup: Ensure dust cup is empty before first use.
Test attachments: Connect each tool to ensure proper fit and function.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from brush roll.

Specifications

Model Series: Shark PRO IR300 Series
Motor Type: High-performance commercial motor
Suction Power: Adjustable multi-setting control
Dust Cup Capacity: 1.5 quarts (dry)
Filtration: HEPA filtration system
Cord Length: 25-foot commercial-grade power cord
Weight: 15 lbs
Dimensions: 46" H x 13" W x 11" D
Power Source: 120V AC, 60Hz, 12 Amps
Warranty: 5-year commercial warranty

Controls and Settings

Main controls located on handle and vacuum body.

Handle Controls: Power switch, suction adjustment dial, brush roll on/off switch, wand release button.

Vacuum Body: Dust cup release, filter access door, hose connection port, cord wrap hooks.

Settings: Suction power (Low/Medium/High), brush roll (On for carpets/Off for hard floors), handle height adjustment (multiple positions).

Using Attachments

Includes crevice tool, dusting brush, upholstery tool, and extension wands.

Remove wand from vacuum body.
Select appropriate attachment for cleaning task.
Connect attachment to wand end until it clicks.
Adjust suction power as needed for attachment.
Clean above-floor areas: furniture, ceilings, walls, stairs.

Tip: Use lower suction for delicate fabrics and upholstery to prevent damage.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Empty dust cup: Press release button, remove and empty when full.
Clean filters: Remove and tap HEPA filter monthly; wash pre-motor filter every 3 months.
Check brush roll: Remove hair and debris weekly; replace when worn.
Inspect hose: Check for clogs or damage regularly.
Clean exterior: Wipe with damp cloth; avoid water near electrical components.

WARNING! Always unplug vacuum before performing maintenance. Allow filters to dry completely before reinstalling.

Filtration System

Two-stage filtration: pre-motor filter and HEPA filter.

Pre-motor filter: Captures large particles; washable; replace annually. HEPA filter: Captures microscopic allergens; replace every 6-12 months depending on use.

Filter replacement procedure: Unplug vacuum > Open filter compartment > Remove old filter > Insert new filter > Close compartment securely.

Care & Storage

Proper care extends vacuum life and maintains performance.

Storage: Wrap cord around hooks, store in dry area, empty dust cup before storage, remove attachments and store separately.

CAUTION! Do not store with wet filters. Keep away from extreme temperatures and moisture.

Regulatory Information

UL Listed: Certified for commercial use in North America. ETL Certified: Meets electrical safety standards. EPA Energy Star: Compliant with energy efficiency guidelines. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clogged filter	Empty dust cup; check and clean filters; remove hose clogs.
Brush roll not spinning	Obstruction/worn belt	Remove debris from brush roll; check and replace belt if necessary.
Vacuum won't turn on	Power source/switch	Check power outlet and cord; ensure power switch is engaged.
Overheating	Clogged filters/full dust cup	Clean filters; empty dust cup; allow vacuum to cool for 30 minutes.
Unusual noise	Foreign object in brush roll/hose	Turn off immediately; inspect brush roll and hose for obstructions.

Reset: Unplug for 10 minutes to reset thermal protection if overheated.

Service: 1-800-798-7398; www.sharkclean.com