Shark PowerPro Vacuum Cleaner Manual

The Shark PowerPro is a versatile upright vacuum cleaner with powerful suction, advanced swivel steering, a HEPA filtration system, multiple cleaning modes for carpets and hard floors, a detachable canister for above-floor cleaning, a motorized brushroll, and various attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, detachable pod, motorized brushroll, swivel steering, HEPA filter, dust cup, hose, and various attachments.

Feature	Description
Powerful Suction	High-performance motor for deep cleaning
Swivel Steering	Maneuvers easily around furniture and obstacles
HEPA Filtration	Traps 99.9% of dust and allergens
Motorized Brushroll	Automatically adjusts between carpets and hard floors
Detachable Pod	Converts to a portable canister for stairs and above-floor cleaning
Large Dust Cup	Easy-to-empty, bagless design
Cleaning Modes	Carpet, Hard Floor, and Bare Floor settings
Attachments	Crevis tool, dusting brush, upholstery tool included
Power Switch	Turns vacuum on/off
Brushroll Control	Engages/disengages brushroll for different surfaces

Assembly & Setup

Unpack and inspect all parts. Assemble according to instructions.

Attach handle: Insert handle into upright body until it clicks into place.
Install hose: Connect hose to the pod and secure the clips.
Attach wand: Insert wand into hose connector.
Install filter: Place HEPA filter into the filter compartment.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Before first use, ensure all parts are properly assembled.

Select cleaning mode: Use brushroll control to set for carpet or hard floor.
Adjust height: For carpets, set to appropriate height setting.
Empty dust cup: Ensure dust cup is empty before starting.
Power on: Press power switch to begin vacuuming.

CAUTION! Keep vacuum away from water and wet surfaces. Do not use on wet spills.

Specifications

Model: Shark PowerPro.
Power: 120V AC, 60Hz.
Suction Power: High-performance motor with adjustable settings.
Filtration: HEPA filter captures 99.9% of particles.
Dust Cup Capacity: 1.5 liters.
Cord Length: 25 feet.
Weight: 15 lbs.
Warranty: 5-year limited warranty.
Attachments: Crevis tool, dusting brush, upholstery tool.

Controls and Settings

Main controls located on handle and body.

Handle Controls: Power switch, brushroll on/off, suction adjustment.

Cleaning Modes: CARPET (brushroll on), HARD FLOOR (brushroll off), BARE FLOOR (suction boost). Height Adjustment: Adjust for low, medium, or high pile carpets. Suction Control: Adjust suction power for different surfaces. Filter Indicator: Light alerts when filter needs cleaning.

Using Attachments

Attachments for specific cleaning tasks.

Detach pod: Press release button to separate pod from upright body.
Connect attachment: Choose tool and attach to wand or hose end.
Use for: Crevis tool for tight spaces, dusting brush for shelves, upholstery tool for furniture.

Tip: Ensure vacuum is off when changing attachments.

Cleaning Modes

Optimize cleaning for different surfaces.

Carpet Mode: Brushroll engaged for deep carpet cleaning.
Hard Floor Mode: Brushroll disengaged to prevent scattering debris.
Bare Floor Mode: Increased suction for hard surfaces.
Above-Floor Cleaning: Use detachable pod with attachments for stairs, furniture, and ceilings.

WARNING! Do not use on wet surfaces. Avoid vacuuming large objects that may clog hose.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button and empty after each use.
Clean filter: Rinse HEPA filter under water every 3 months; air dry completely before reinserting.
Check brushroll: Remove hair and debris from brushroll monthly.
Inspect hose: Clear any clogs from hose and attachments.

CAUTION! Unplug vacuum before performing any maintenance. Do not use damaged parts.

Safety Information

Read all safety instructions before use.

Do not use near water or wet surfaces.
Keep cord away from heated surfaces.
Do not vacuum burning or smoking materials.
Keep hair, loose clothing, and fingers away from moving parts.
Unplug before servicing or changing attachments.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup or clog	Empty dust cup; check hose and brushroll for blockages.
Brushroll not spinning	Obstruction or belt issue	Clear debris from brushroll; check belt for wear.
Vacuum won't turn on	Power cord or switch	Ensure plug is secure; check power outlet; replace if switch faulty.
Overheating	Clogged filter or full dust cup	Clean filter; empty dust cup; allow vacuum to cool.
Unusual noise	Foreign object in brushroll or hose	Turn off and unplug; inspect brushroll and hose for objects.

Reset: Unplug for 10 minutes if vacuum overheats.

Service: 1-800-798-7398; www.sharkclean.com