Shark POWERED Lift-Away UV810 Vacuum Cleaner Manual

The Shark POWERED Lift-Away UV810 is a versatile upright vacuum cleaner featuring Lift-Away technology for portable cleaning, a motorized brushroll for carpets, HEPA filtration, multiple suction settings, LED headlights, a large-capacity dust cup, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Lift-Away Mode 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, motorized brushroll, HEPA filter, dust cup, crevice tool, dusting brush, upholstery tool, wand, and hose.

Feature	Description
Lift-Away Technology	Detachable pod for portable cleaning above floors
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
HEPA Filtration System	Captures 99.9% of dust and allergens
Suction Power Control	Adjustable settings for different surfaces
LED Headlights	Illuminates dark areas under furniture
Large Dust Cup	Easy-empty, no bags required
POWER Button	Turns vacuum on/off
Brushroll On/Off Switch	Disengages brushroll for hard floors
Lift-Away Release Button	Detaches pod from the main body
Attachment Dock	Stores tools on the vacuum for easy access

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

Attach the wand: Insert the wand into the hose connector until it clicks.
Connect the hose: Attach the hose to the vacuum body and wand.
Install attachments: Dock the crevice tool, dusting brush, and upholstery tool on the attachment holder.
Install filters: Place the HEPA filter and pre-motor filter as indicated in the manual.
Plug into a standard 120V AC outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from brushroll during assembly.

First-Time Use

Plug in the vacuum and power on to begin.

Select surface setting: Use the suction control dial for carpets (high) or hard floors (low).
Engage brushroll: Ensure brushroll is ON for carpets; turn OFF for delicate rugs or hard floors.
Empty dust cup: Check dust cup level before first use; empty if necessary.
Test attachments: Attach tools to the hose for above-floor cleaning.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hose and wand clear of obstructions.

Specifications

Model: Shark POWERED Lift-Away UV810.
Technology: Lift-Away portable pod system.
Filtration: HEPA filter with anti-allergen seal.
Brushroll: Motorized with on/off control.
Attachments: Crevice tool, dusting brush, upholstery tool, wand, hose.
Dust Cup Capacity: 1.2 dry quarts.
Cord Length: 25 feet.
Power Source: 120V AC, 60Hz.
Weight: 14.5 lbs.

Controls and Settings

Main controls located on the vacuum body. Power Button: Turns vacuum on/off. Suction Control Dial: Adjusts suction power (High for carpets, Low for hard floors). Brushroll Switch: Turns motorized brushroll on/off. Lift-Away Button: Press to detach pod from the main body.

LED Indicators: Power ON (blue light), Brushroll ON (green light), Filter Check (red light when filter needs cleaning).

Settings: Carpet mode (High suction + Brushroll ON), Hard Floor mode (Low suction + Brushroll OFF), Above Floor mode (Use attachments with Lift-Away pod).

Using Attachments

Attach tools to the hose for specialized cleaning.

Turn off vacuum before changing attachments.
Crevice Tool: For tight spaces, corners, and along edges.
Dusting Brush: For delicate surfaces, blinds, and shelves.
Upholstery Tool: For sofas, chairs, and stairs.
Wand Extension: For high ceilings and above-floor reach.

Tip: Ensure attachments click securely into place before use.

Lift-Away Mode

Detach the pod for portable cleaning above floors.

Press the Lift-Away release button on the vacuum body.
Lift the pod away from the main base.
Carry the pod using the handle; the hose remains connected.
Attach tools directly to the hose for cleaning stairs, furniture, or ceilings.
Reattach the pod by aligning it with the base and pressing down until it clicks.

WARNING! Do not pull the hose excessively; ensure it is untangled before use.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty contents into trash.
Clean filters: Rinse HEPA filter and pre-motor filter with cold water every 3 months; air dry for 24 hours.
Clear brushroll: Remove hair and debris from brushroll regularly.
Check hose and wand: Remove clogs if suction decreases.
Wipe exterior: Use a dry cloth to clean the vacuum body.

CAUTION! Unplug vacuum before maintenance. Do not use filters until completely dry.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check power connection; ensure outlet is working; inspect cord for damage.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and brushroll for blockages.
Brushroll not spinning	Switch/obstruction	Ensure brushroll is ON; remove tangled hair or debris from brushroll.
Vacuum overheats	Clog/filter	Turn off and unplug; clear clogs; check and clean filters.
Lift-Away pod not detaching	Release button	Press release button firmly; ensure pod is aligned correctly.

Reset: Unplug for 30 minutes if vacuum overheats.

Service: 1-800-798-7398; www.sharkclean.com