Shark PowerDetect NeverTouch Pro Vacuum Cleaner Manual

The Shark PowerDetect NeverTouch Pro is a high-performance cordless vacuum cleaner featuring PowerDetect technology for enhanced suction on carpets, a self-cleaning brushroll that never needs manual hair removal, a NeverTouch bagless dust cup, LED headlights, multiple cleaning modes, and a versatile design for floors and above-floor cleaning. Powered by a removable lithium-ion battery. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized floor nozzle with PowerDetect and self-cleaning brushroll, Handheld vacuum unit, Removable battery, Charging dock, Crevice tool, Dusting brush, Upholstery tool.

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Insert the battery: Align battery with vacuum handle, slide in until it clicks.
2. Attach floor nozzle: Connect the wand to the motorized floor nozzle until it locks.
3. Connect wand to handle: Insert wand into vacuum handle until it clicks securely.
4. Place charging dock: Position on stable surface near wall outlet; plug charger into dock and outlet.
5. Charge battery: Place vacuum or spare battery on dock; LED indicates charging (solid red = charging, solid green = fully charged).

WARNING! Ensure vacuum is powered off during assembly. Keep hair, loose clothing, and fingers away from brushroll.

First-Time Use

Fully charge battery before initial use.

1. Power on: Press power button on handle; LED display shows battery level.
2. Select mode: Use mode button to cycle through Eco (long runtime), Normal (balanced), Boost (max suction).
3. Begin cleaning: Push vacuum forward on floor; PowerDetect activates automatically on carpets.
4. Empty dust cup: Press release button to detach cup; hold over trash and press bottom latch to open.
5. Convert to handheld: Press wand release button to detach floor nozzle; attach crevice or brush tool.

CAUTION! Do not use on wet surfaces or to pick up liquids, burning materials, or sharp objects.

Specifications

• Type: Cordless stick vacuum with handheld conversion.
• Technology: PowerDetect suction adjustment, NeverTouch self-cleaning brushroll.
• Battery: Removable lithium-ion, 40V, approx. 60 min runtime in Eco mode.
• Charging Time: Approx. 4 hours for full charge.
• Dust Cup Capacity: 0.7 quarts (dry).
• Filters: Washable pre-motor and post-motor HEPA filter.
• Attachments: Motorized floor nozzle, crevice tool, dusting brush, upholstery tool.
• Weight: 7.5 lbs (with battery and floor nozzle).
• Warranty: 5-year limited warranty (see manual for details).

Controls and Modes

Handle Controls: Power button, Mode button (Eco/Normal/Boost), Battery indicator LED, Wand release button.

LED Display: Shows battery level (5 bars), cleaning mode, and filter maintenance alert.

Cleaning Modes: Eco (extended runtime, lower suction), Normal (balanced cleaning), Boost (maximum suction for deep cleaning). PowerDetect: Automatically engaged on carpets; LED on nozzle lights blue. Brushroll Control: Automatically adjusts speed for surface type; self-cleaning activates when vacuum is powered off.

Cleaning Attachments

Motorized Floor Nozzle: For carpets and hard floors with self-cleaning brushroll. Crevice Tool: For tight spaces, corners, and along edges. Dusting Brush: For delicate surfaces, shelves, and electronics. Upholstery Tool: For sofas, chairs, and stairs.

1. To attach: Align tool with wand or handheld end until it clicks.
2. To detach: Press release button on wand or tool connection point.

Tip: Use appropriate attachment for each surface to optimize cleaning and prevent damage.

Cleaning Procedures

For best results, follow these steps.

1. Pre-clean: Pick up large debris to prevent clogging.
2. Select mode: Start in Normal mode; use Boost for high-traffic areas.
3. Floor cleaning: Use slow, overlapping passes; allow PowerDetect to adjust on carpets.
4. Above-floor cleaning: Convert to handheld; attach appropriate tool.
5. Empty dust cup: When full or after each use to maintain suction.
6. Clean filters: Rinse filters every 3 months or when indicated.
7. Check brushroll: Ensure it rotates freely; clear any obstructions if needed.

WARNING! Never use vacuum without filters installed. Do not vacuum hot ashes or sharp objects.

Care & Maintenance

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use.
2. Clean pre-motor filter monthly: Remove, tap out debris, rinse under cold water, air dry 24 hrs.
3. Clean post-motor HEPA filter every 3 months: Remove, rinse, air dry completely.
4. Inspect brushroll monthly: Remove any tangled debris (self-cleaning handles most hair).
5. Check battery contacts: Keep clean and dry.
6. Store on charging dock to keep battery charged.

CAUTION! Always ensure filters are completely dry before reinstalling. Do not use damaged battery.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

Reset: Remove battery for 60 seconds, then reinsert.

Service: 1-800-798-7398; sharkclean.com