Shark PowerDetect IP3000EU Series Vacuum Cleaner Manual

The Shark PowerDetect IP3000EU Series is a high-performance cordless vacuum cleaner featuring PowerDetect technology for automatic suction power adjustment, a self-cleaning brushroll, DuoClean floor nozzle, Anti-Hair Wrap technology, HEPA filtration, LED headlights, and a removable battery. Designed for whole-home cleaning on carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body, DuoClean floor nozzle, Crevice tool, Dusting brush, Upholstery tool, Charging dock, Removable battery, Power button, Mode selector.

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Attach wand: Insert wand into main body until it clicks.
2. Attach floor nozzle: Connect DuoClean nozzle to wand until secure.
3. Install battery: Slide battery into vacuum body until it locks.
4. Charge battery: Place vacuum on charging dock or plug charger directly into vacuum.
5. Attach accessories: Store crevice tool, dusting brush, and upholstery tool on dock.

WARNING! Ensure vacuum is turned off during assembly. Keep fingers clear of moving parts.

First-Time Use

Fully charge battery before first use (approx. 4 hours).

1. Power on: Press power button; vacuum will be in Normal mode.
2. Select mode: Use mode button to cycle through Eco, Normal, Boost.
3. Begin cleaning: Push vacuum forward on floor; PowerDetect will auto-adjust suction.
4. Empty dust cup: Press dust cup release button when full; hold over trash can.
5. Use attachments: Detach wand for above-floor cleaning with tools.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from brushroll.

Specifications

• Model Series: Shark PowerDetect IP3000EU.
• Power Source: Removable lithium-ion battery.
• Charging Time: Approx. 4 hours for full charge.
• Run Time: Up to 60 minutes (Eco), 40 minutes (Normal), 15 minutes (Boost).
• Filtration: HEPA filter captures 99.9% of particles down to 0.3 microns.
• Dust Cup Capacity: 0.8 liters.
• Noise Level: ≤78 dB(A).
• Weight: 3.2 kg (with battery and floor nozzle).
• Operating Voltage: 21.6V DC.
• Warranty: 2-year limited warranty.

Controls and Settings

Main controls located on vacuum body. Power Button: Turns vacuum on/off. Mode Button: Cycles through Eco (for longer runtime), Normal (balanced cleaning), Boost (max suction for tough messes). Wand Release: Press to detach wand for above-floor cleaning. Dust Cup Release: Press to empty dust cup.

LED Indicators: Battery status (green = charged, red = low, flashing red = needs charge). Filter Alert: Flashes when filter needs cleaning.

PowerDetect: Automatically active; no manual setting required. Anti-Hair Wrap: Continuously active on brushroll.

Using Attachments

For above-floor cleaning: Detach wand, connect desired tool.

1. Crevice Tool: For tight spaces, corners, between cushions.
2. Dusting Brush: For delicate surfaces, shelves, blinds.
3. Upholstery Tool: For sofas, chairs, stairs, car interiors.
4. Under-Appliance Wand: For cleaning under refrigerators, ovens (optional accessory).

Tip: Ensure vacuum is turned off when changing attachments.

Cleaning Modes

Three modes for different cleaning needs.

1. Eco Mode: Maximizes battery life for light, everyday cleaning.
2. Normal Mode: Balanced cleaning for mixed floor types.
3. Boost Mode: Maximum suction for deep cleaning carpets and tough messes.

PowerDetect Technology: Works in all modes; automatically increases suction when transitioning from hard floor to carpet.

WARNING! Boost mode reduces battery runtime significantly. Use only when needed.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use.
2. Clean HEPA filter monthly: Rinse under cold water, air dry 24 hours.
3. Check brushroll for debris: Remove hair or strings as needed.
4. Clean sensors: Wipe PowerDetect sensors with dry cloth.
5. Inspect attachments: Clear blockages from tools.

CAUTION! Do not use vacuum without filter. Ensure all parts are completely dry before reassembly.

Battery Information

Lithium-ion battery; removable for replacement or spare use.

• Charging: Use only Shark charger provided. Charge fully before first use.
• Storage: Store in cool, dry place. Charge battery every 6 months if not in use.
• Replacement: Purchase genuine Shark batteries only.
• Disposal: Do not dispose in household trash. Recycle according to local regulations.

WARNING! Do not expose battery to fire, water, or extreme temperatures. Do not attempt to disassemble.

Regulatory Information

CE marked. Complies with EU directives for electromagnetic compatibility and low voltage safety. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste. Recycle through authorized facilities. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com/eu or contact customer service at regional toll-free number.

Troubleshooting

Reset: Turn off, remove battery for 60 seconds, reinsert.

Service: sharkclean.com/eu or contact customer service.