Shark POWERDETECT IP3000 Series Vacuum Cleaner Manual

The Shark POWERDETECT IP3000 Series is a high-performance cordless vacuum cleaner featuring intelligent suction power adjustment, a self-cleaning brushroll, LED headlights, a large-capacity dustbin, and a versatile cleaning system for floors and above-floor surfaces. It includes a docking station, multiple attachments, and advanced filtration. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: POWERDETECT motor, Self-Cleaning Brushroll, LED Headlights, Large Dustbin with One-Touch Empty, Docking Station, Crevice Tool, Upholstery Tool, Dusting Brush.

Unpacking and Setup

Unpack and inspect all contents. Assemble the vacuum for first use.

1. Insert the battery: Align battery with handle, slide in until it clicks.
2. Attach the wand: Insert wand into main body until it clicks securely.
3. Attach the floor nozzle: Connect floor nozzle to wand until it clicks.
4. Place on docking station: Ensure charging contacts align; plug charger into outlet.

WARNING! Do not use vacuum if damaged. Keep charger away from water.

First-Time Use

Fully charge the vacuum before first use (approx. 4 hours).

1. Power on: Press and hold the power button on the handle.
2. Select mode: Use mode button to cycle through Eco, Normal, and Boost.
3. Begin cleaning: Push vacuum forward on floor; POWERDETECT will auto-adjust suction.
4. Empty dustbin: Press dustbin release button over trash can.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

• Model Series: IP3000 Series.
• Power Source: Removable lithium-ion battery.
• Runtime: Up to 60 minutes (Eco mode).
• Charging Time: Approximately 4 hours.
• Dustbin Capacity: 0.8 liters.
• Filtration: HEPA and foam filter, washable.
• Weight: 7.5 lbs (with battery and floor nozzle).
• Noise Level: ≤75 dB.
• Warranty: 5-year limited warranty.

Controls and Indicators

Handle Controls: Power button, Mode button (Eco/Normal/Boost), Wand release button.

Indicator Lights: Battery status (green=charged, red=low, flashing=charging).

Cleaning Modes: Eco (max runtime), Normal (balanced cleaning), Boost (max suction for tough messes). POWERDETECT: Automatically activates on carpets. Self-Cleaning Brushroll: Automatically removes hair during use.

Using Attachments

Convert to handheld: Press wand release button, remove wand.

1. Crevice Tool: For tight spaces, corners, and between cushions.
2. Upholstery Tool: For sofas, chairs, and stairs.
3. Dusting Brush: For delicate surfaces, shelves, and blinds.

Tip: Ensure vacuum is off when changing attachments.

Cleaning Modes and Power Settings

Optimize cleaning based on surface and debris type.

1. Eco Mode: For light cleaning and extended runtime.
2. Normal Mode: For everyday cleaning on hard floors and low-pile carpets.
3. Boost Mode: For deep cleaning carpets and picking up heavy debris.
4. POWERDETECT: Automatically increases suction on carpets; no manual adjustment needed.
5. LED Headlights: Automatically turn on in low-light conditions.

WARNING! Do not use Boost mode continuously on delicate rugs.

Maintenance and Care

Regular maintenance ensures optimal performance.

1. Empty dustbin after each use.
2. Clean filters monthly: Rinse HEPA and foam filters under water; air dry 24 hours.
3. Check brushroll: Remove any tangled debris; ensure it spins freely.
4. Clean sensors: Wipe POWERDETECT sensors with dry cloth.
5. Store on docking station to keep battery charged.

CAUTION! Do not use vacuum without filters installed.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of separately from household waste.

Troubleshooting

Reset: Remove battery for 30 seconds, then reinsert.

Service: 1-800-798-7398; sharkclean.com