Shark POWERDETECT IP1251 Vacuum Cleaner Manual

The Shark POWERDETECT IP1251 is a powerful cordless stick vacuum cleaner featuring DuoClean PowerFins technology, POWER DETECT sensor technology for increased suction on hidden debris, Anti-Allergen Complete Seal with HEPA filter, LED headlights, a removable battery, and multiple cleaning modes. It includes a charging dock, crevice tool, dusting brush, and upholstery tool. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Modes 6. Attachments & Accessories 7. Cleaning Operations 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, POWER DETECT brushroll, LED headlights, Removable battery, Charging dock, Crevice tool, Dusting brush, Upholstery tool.

FeatureDescription
POWER DETECT TechnologySensor increases suction power automatically on carpets and hidden debris
DuoClean PowerFinsDual brushroll system for carpets and hard floors
Anti-Allergen Complete SealHEPA filtration traps 99.9% of dust and allergens
LED HeadlightsIlluminates dark areas under furniture
Removable BatteryLithium-ion battery with up to 60 minutes runtime (eco mode)
Charging DockWall-mountable dock for storage and charging
Cleaning ModesECO, NORMAL, BOOST for different surfaces
Wand Release ButtonConverts to handheld vacuum
Dust Cup ReleaseEasy-empty dust cup with one-touch release
Accessory StorageOn-board storage for crevice tool and dusting brush

Assembly & Setup

Unpack and inspect all contents. Ensure all parts are present.

  1. Insert the battery: Align battery with slot on vacuum body, push until it clicks.
  2. Attach the wand: Insert wand into vacuum body until it clicks securely.
  3. Attach floor nozzle: Align nozzle with wand end and push until it clicks.
  4. Mount charging dock: Use included screws to mount dock on wall near outlet.
  5. Charge the vacuum: Place vacuum onto dock; charging indicator will light.

WARNING! Ensure vacuum is powered OFF during assembly. Keep fingers clear of moving parts.

First-Time Use

Fully charge battery before first use (approx. 4 hours).

  1. Power on: Press and hold power button for 2 seconds; vacuum will beep.
  2. Select mode: Use mode button to cycle through ECO, NORMAL, BOOST.
  3. Begin cleaning: Push vacuum forward on floor; POWER DETECT will activate automatically.
  4. Use attachments: Press wand release to convert to handheld; attach desired tool.
  5. Empty dust cup: Press release button, hold over trash, and open bottom lid.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Controls and Modes

Main controls located on handle. Power Button: Press and hold to turn ON/OFF. Mode Button: Cycles through ECO (green), NORMAL (blue), BOOST (red). Wand Release Button: Converts to handheld. Dust Cup Release: Button on back of dust cup.

Cleaning Modes: ECO for long runtime on hard floors, NORMAL for everyday cleaning, BOOST for maximum suction on carpets. POWER DETECT activates automatically in NORMAL and BOOST modes when extra debris is detected.

Attachments & Accessories

Crevice Tool: For tight spaces, corners, and between cushions. Dusting Brush: For delicate surfaces, shelves, and blinds. Upholstery Tool: For sofas, chairs, and stairs.

  1. To attach: Ensure vacuum is in handheld mode; align tool with nozzle and push until click.
  2. To remove: Press release button on tool and pull away.
  3. Storage: Crevice tool and dusting brush store on vacuum body.

Tip: Use appropriate attachment for each surface to optimize cleaning and prevent damage.

Cleaning Operations

For floors, above-floor surfaces, and detailed cleaning.

  1. Hard Floors: Use ECO or NORMAL mode; POWER DETECT may activate on debris.
  2. Carpets: Use NORMAL or BOOST mode; make slow, overlapping passes.
  3. Above-Floor: Convert to handheld; attach appropriate tool.
  4. Empty dust cup when full or after each use.
  5. Check brushroll for tangles regularly; clear if needed.
  6. Recharge battery when indicator flashes red.

WARNING! Do not use on wet surfaces. Keep vacuum away from face and body while operating.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup after each use.
  2. Clean filter monthly: Remove, tap gently, rinse with cold water (air dry 24 hours).
  3. Clear brushroll: Turn off, inspect, cut away hair or fibers with scissors.
  4. Check for blockages: In wand, nozzle, and hose if suction decreases.
  5. Store on charging dock to keep battery charged.

CAUTION! Unplug charger and remove battery before maintenance. Do not use damaged vacuum.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery not charged/insertedCharge battery fully; ensure it's clicked into place.
Reduced suctionFull dust cup/clogged filter/blockageEmpty dust cup; clean filter; check for blockages in wand and nozzle.
Brushroll not spinningTangles or obstructionTurn off, clear hair/debris from brushroll.
Battery drains quicklyOld battery/BOOST mode overuseUse ECO mode for longer runtime; consider battery replacement if old.
POWER DETECT not activatingMode setting/sensor issueEnsure in NORMAL or BOOST mode; clean sensor window on nozzle.
Vacuum overheatingBlockage/continuous useTurn off, let cool, check for blockages; avoid using >60 minutes continuously.

Reset: Remove battery for 1 minute, reinsert, and power on.

Service: 1-800-798-7398; sharkclean.com

Shark POWERDETECT IP1251 Vacuum Cleaner Manual © - All Rights Reserved 2025