Shark POWERDETECT IP1250 Vacuum Cleaner Manual

The Shark POWERDETECT IP1250 is a cordless stick vacuum cleaner featuring POWERDETECT technology for enhanced suction on hidden debris, a self-cleaning brushroll, LED headlights, a removable battery, multiple cleaning modes, and a versatile design for floors and above-floor cleaning. It includes a charging dock, crevice tool, dusting brush, and upholstery tool. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: POWERDETECT motorized floor nozzle, LED headlights, removable battery pack, charging dock, wand, handle with controls, and accessory tools.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Insert battery: Align battery with handle slot, push until it clicks.
2. Attach wand: Insert wand into floor nozzle until it clicks; attach other end to handle.
3. Place charging dock: Position on stable surface near wall outlet.
4. Charge battery: Place vacuum on dock; ensure charging indicator lights.

WARNING! Ensure vacuum is off and battery is securely installed before assembly. Keep hair, loose clothing, and fingers away from brushroll.

First-Time Use

Fully charge battery before initial use.

1. Power on: Press power button on handle; select cleaning mode (Eco recommended for first use).
2. Adjust suction: Use mode button to switch between Eco, Normal, Max.
3. Begin cleaning: Push vacuum forward on floor; POWERDETECT activates automatically on carpets.
4. Empty dust cup: Press release button to remove and empty cup after use.

CAUTION! Do not use on wet surfaces or to pick up liquids, burning materials, or sharp objects.

Specifications

• Model: Shark POWERDETECT IP1250.
• Type: Cordless stick vacuum.
• Technology: POWERDETECT suction automation, self-cleaning brushroll.
• Battery: Removable lithium-ion, 4.0 Ah.
• Charging Time: Approx. 3.5 hours for full charge.
• Run Time: Up to 60 minutes (Eco), 30 minutes (Normal), 15 minutes (Max).
• Dust Cup Capacity: 0.7 quarts (dry).
• Filters: Washable foam and felt filters.
• Accessories: Crevice tool, dusting brush, upholstery tool.
• Power Source: 120V AC charging dock.

Controls and Settings

Handle controls: Power button, Mode button (cycles Eco/Normal/Max), Wand release button.

Indicators: Battery LED (green = charged, red = low, flashing = charging), brushroll indicator (flashes if jammed).

Cleaning Modes: Eco (max runtime, lower suction), Normal (balanced), Max (max suction, shorter runtime). Wand Release: Press button to detach wand for handheld use. Brushroll On/Off: Automatically engages on floors; can be turned off for delicate rugs via button on nozzle (if equipped).

Attachments & Accessories

Use attachments for above-floor cleaning: attach to wand or handle.

1. Crevice Tool: For tight spaces, corners, between cushions.
2. Dusting Brush: For shelves, blinds, lampshades.
3. Upholstery Tool: For sofas, chairs, car interiors.
4. Storage: Dock holds crevice tool and dusting brush; store upholstery tool separately.

Tip: Ensure vacuum is off when changing attachments.

Cleaning Modes & Techniques

Optimize cleaning based on surface and debris.

1. Hard Floors: Use Eco or Normal mode; POWERDETECT may not activate.
2. Carpets/Rugs: Normal or Max mode; POWERDETECT boosts suction automatically.
3. Above-Floor: Detach wand, attach tool directly to handle for handheld use.
4. High-Pile Rugs: Consider turning brushroll off (if available) to prevent tangling.
5. Under Furniture: LED headlights illuminate hidden debris.
6. Stairs: Use handheld mode with upholstery tool.

WARNING! Do not vacuum large objects that may clog brushroll or hose.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: After each use or when full; press release to remove.
2. Clean filters: Rinse foam and felt filters every month; air dry 24 hours before reinserting.
3. Clear brushroll: Remove debris wrapped around brushroll; check monthly.
4. Inspect nozzle: Remove blockages from floor nozzle intake.
5. Wipe surfaces: Use dry cloth to clean vacuum body and dock.

CAUTION! Unplug charging dock and remove battery before maintenance. Do not use damaged filters.

Battery & Charging

Battery is removable and rechargeable.

1. Charging: Place vacuum on dock; LED flashes red, turns solid green when fully charged.
2. Battery Removal: Press battery release button, slide out.
3. Storage: Store battery in cool, dry place; charge every 6 months if not in use.
4. Replacement: Use only Shark IP1250 replacement batteries.

WARNING! Do not expose battery to fire, water, or extreme temperatures. Do not disassemble.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. Battery complies with UL standards. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Remove battery for 10 seconds, reinsert.

Service: 1-800-798-7398; sharkclean.com