Shark POWERDETECT IP1000 Series Vacuum Cleaner Manual

The Shark POWERDETECT IP1000 Series is a cordless stick vacuum cleaner featuring PowerFins technology, DuoClean floor nozzle, LED headlights, Anti-Allergen Complete Seal technology, and a removable battery. It offers multiple cleaning modes, a versatile cleaning kit, and a self-cleaning brushroll. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized floor nozzle with PowerFins and DuoClean, LED headlights, handheld pod, removable battery, charging dock, and accessory storage.

Assembly & Setup

Unpack and inspect all contents. Assemble components as follows.

1. Insert battery: Align battery with slot on vacuum body; slide until it clicks.
2. Attach floor nozzle: Connect nozzle to vacuum wand until it locks securely.
3. Attach wand to handheld pod: Insert wand into pod until it clicks into place.
4. Set up charging dock: Place dock on a flat, stable surface near a power outlet.
5. Charge battery: Place vacuum on dock; ensure charging indicator lights up.

WARNING! Ensure vacuum is turned off during assembly. Keep hands clear of moving parts.

First-Time Use

Fully charge battery before first use; follow these steps.

1. Charge battery: Place on dock; initial charge takes approximately 3.5 hours.
2. Power on: Press power button; vacuum will start in Normal mode.
3. Select cleaning mode: Use mode button to cycle through Eco, Normal, Boost.
4. Begin cleaning: Move vacuum slowly over surfaces for optimal pickup.
5. Empty dust cup: Press release button to detach cup; empty into trash.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from brushroll.

Specifications

• Model Series: POWERDETECT IP1000 Series.
• Type: Cordless stick vacuum with handheld capability.
• Battery: Removable lithium-ion, 40V.
• Charging Time: Approx. 3.5 hours for full charge.
• Run Time: Up to 60 minutes in Eco mode, 30 minutes in Boost mode.
• Dust Cup Capacity: 0.7 quarts (dry).
• Filtration: Anti-Allergen Complete Seal with HEPA and foam filters.
• Attachments: Crevice tool, dusting brush, upholstery tool included.
• Weight: 7.5 lbs (with battery).
• Power Source: 100-240V AC, 50/60Hz charging dock.

Controls and Modes

Access controls via buttons on handheld pod. Power Button: Turns vacuum on/off. Mode Button: Cycles through Eco (low power), Normal (standard), Boost (max suction). Brushroll Indicator: Lights up when brushroll is engaged or if blockage occurs.

LED Indicators: Battery status (green = charged, red = low, flashing = charging).

Handheld Conversion: Press release button to detach pod from wand for above-floor cleaning. Accessory Storage: Dock includes slots for storing attachments.

Attachments & Accessories

Use attachments for specialized cleaning tasks.

1. Crevice Tool: For tight spaces, corners, and between cushions.
2. Dusting Brush: For delicate surfaces, shelves, and blinds.
3. Upholstery Tool: For sofas, chairs, and car interiors.
4. Motorized Floor Nozzle: For carpets and hard floors (attached by default).

Tip: Ensure vacuum is off before attaching or removing accessories.

Cleaning Operation

Optimize cleaning with these techniques.

1. For carpets: Use Boost mode for deep cleaning; make slow, overlapping passes.
2. For hard floors: Use Normal or Eco mode; DuoClean nozzle adjusts automatically.
3. Above-floor cleaning: Convert to handheld; attach appropriate tool.
4. Empty dust cup: When full or after each use; press release button to remove.
5. Clean filters: Remove and tap off debris; wash as needed (see Maintenance).
6. Check for blockages: If suction decreases, turn off and inspect hose, nozzle, and wand.

WARNING! Do not vacuum large objects, liquids, or hot ashes. Unplug charger when not in use.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use.
2. Clean pre-motor filter monthly: Remove, tap out debris, rinse with cold water, air dry 24 hours.
3. Clean post-motor HEPA filter every 3 months: Follow same steps as pre-motor filter.
4. Inspect brushroll regularly: Remove wrapped hair or debris with scissors or cleaning tool.
5. Check battery contacts: Keep clean and dry.
6. Store in a cool, dry place; avoid extreme temperatures.

CAUTION! Ensure all parts are completely dry before reassembling. Do not use damaged filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398. Battery disposal: Follow local regulations for lithium-ion batteries.

Troubleshooting

Reset: Turn off, remove battery for 30 seconds, reinsert, and turn on.

Service: 1-800-798-7398; sharkclean.com