Shark POWERDETECT AZ3900ANZ Series Vacuum Cleaner Manual

The Shark POWERDETECT AZ3900ANZ Series is a cordless stick vacuum cleaner featuring POWERDETECT technology for enhanced suction on hidden debris, DuoClean PowerFins brushroll for multi-surface cleaning, Anti-Allergen Complete Seal technology, LED headlights, a removable battery, and multiple cleaning modes. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: POWERDETECT motor, DuoClean PowerFins brushroll, LED headlights, Anti-Allergen Complete Seal filtration, removable battery, handheld configuration, crevice tool, dusting brush, and charging dock.

Assembly & Setup

Unpack and inspect all components. Assemble before first use.

1. Attach the handle: Insert the handle into the main body until it clicks securely.
2. Install the battery: Slide the battery into the compartment until it locks.
3. Attach cleaning head: Connect the DuoClean PowerFins head to the wand.
4. Charge the battery: Place the vacuum on the charging dock or plug the charger directly into the vacuum.

WARNING! Ensure the vacuum is turned off and unplugged from the charger during assembly. Keep fingers away from moving parts.

First-Time Use

Fully charge the battery before initial use. Follow these steps:

1. Charge: Place on dock; charging indicator will illuminate. Full charge takes approximately 3.5 hours.
2. Power on: Press the power button; select cleaning mode (Eco, Normal, Boost).
3. Adjust suction: Use the mode button to switch between settings based on floor type.
4. Empty dust cup: After cleaning, press the release button to empty the cup into a trash bin.

CAUTION! Do not use on wet surfaces or to pick up liquids, burning materials, or sharp objects.

Specifications

• Model Series: AZ3900ANZ.
• Power Source: Rechargeable lithium-ion battery.
• Runtime: Up to 60 minutes in Eco mode, 30 minutes in Normal, 15 minutes in Boost.
• Charging Time: Approx. 3.5 hours for full charge.
• Filtration: Anti-Allergen Complete Seal with HEPA and foam filters.
• Dust Cup Capacity: 0.7 quarts (dry).
• Weight: 7.5 lbs (with battery).
• Noise Level: ≤ 78 dB.
• Warranty: 5-year limited warranty (subject to registration).

Controls and Modes

Main controls located on the handle: Power button, Mode selector, Battery indicator.

Cleaning Modes: Eco (for longer runtime on light debris), Normal (for everyday cleaning), Boost (for maximum suction on carpets and heavy debris).

Battery Indicator: LED lights show remaining charge (green = high, amber = medium, red = low, flashing red = needs charging).

Handheld Conversion: Press the release button to detach the wand and use as a handheld vacuum with attachments.

Cleaning Attachments

Included accessories: Crevice Tool, Dusting Brush, Upholstery Tool.

1. Attach: Insert the desired tool into the handheld vacuum or wand end.
2. Use: Select appropriate mode for the task (e.g., Boost for upholstery).
3. Store: Keep attachments in the storage compartment on the charging dock.

Tip: Use the dusting brush for delicate surfaces and the crevice tool for tight spaces.

Cleaning Procedures

For optimal performance on different surfaces:

1. Carpets: Use Boost mode for deep cleaning; move slowly to allow brushroll to agitate fibers.
2. Hard Floors: Use Normal or Eco mode; ensure brushroll is free of hair and debris.
3. Above-Floor: Convert to handheld; attach appropriate tool for furniture, curtains, or ceilings.
4. Empty Dust Cup: Hold over trash; press release button to open bottom lid.
5. Clean Filters: Remove and rinse foam and HEPA filters monthly (see Maintenance).

WARNING! Always turn off the vacuum before changing attachments or emptying the dust cup.

Maintenance & Care

Regular maintenance ensures peak performance and longevity.

1. Empty dust cup after each use.
2. Check brushroll for tangled hair or threads; cut away with scissors if needed.
3. Wash foam and HEPA filters every 3 months (or as needed) under cold water; air dry for 24 hours before reinstalling.
4. Inspect battery contacts; clean with dry cloth if dirty.
5. Store vacuum on charging dock in a cool, dry place.

CAUTION! Do not use damaged filters or operate without filters installed.

Battery & Charging

The lithium-ion battery is removable and rechargeable.

• Charging: Use only the provided charger and dock. Indicator lights show charging status.
• Battery Removal: Press the release button and slide the battery out.
• Storage: If not using for extended periods, store battery at 50% charge in a cool, dry place.
• Replacement: Use only Shark-approved batteries (model RBAT series).

WARNING! Do not expose battery to fire, water, or extreme temperatures. Do not attempt to disassemble.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. POWERDETECT, DuoClean, Anti-Allergen Complete Seal are trademarks of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Remove battery for 10 seconds, then reinsert.

Service: 1-800-798-7398; sharkclean.com