Shark POWERDETECT AV2800ZEUKWH Series Vacuum Cleaner Manual

The Shark POWERDETECT AV2800ZEUKWH Series is a corded upright vacuum cleaner featuring POWERDETECT technology for enhanced surface detection, DuoClean PowerFins brushroll, Anti-Hair Wrap technology, LED headlights, a large-capacity dust cup, and multiple cleaning modes. It is designed for deep cleaning on carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: POWERDETECT motorhead, DuoClean PowerFins brushroll, Anti-Hair Wrap technology, LED headlights, large-capacity dust cup, wand, hose, and various attachments.

Assembly & Setup

Unpack and inspect all contents. Assemble according to instructions.

1. Attach the wand: Insert the wand into the vacuum body until it clicks.
2. Connect the hose: Attach the hose to the wand and vacuum body.
3. Install attachments: Store crevice tool, dusting brush, and upholstery tool on onboard holders.
4. Plug into a standard electrical outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Keep fingers away from moving parts.

First-Time Use

Plug in the vacuum and select the appropriate cleaning mode.

1. Select cleaning mode: Use the mode selector switch for Hard Floor, Carpet, or Boost.
2. Adjust height: For carpets, ensure the brushroll is at the correct height.
3. Empty dust cup: Check and empty the dust cup before first use.
4. Test attachments: Use the crevice tool and dusting brush for above-floor cleaning.

CAUTION! Do not use on wet surfaces. Keep the vacuum away from water.

Specifications

• Model: AV2800ZEUKWH Series.
• Power Source: Corded, 120V AC, 60Hz.
• Suction Power: Adjustable via POWERDETECT technology.
• Dust Cup Capacity: 1.5 quarts.
• Cord Length: 30 feet.
• Brushroll: DuoClean PowerFins with Anti-Hair Wrap.
• Filters: Washable foam and felt filters.
• Weight: 15.4 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Access controls via the mode selector switch and buttons on the handle.

Handle Controls: Power button, mode selector (Hard Floor, Carpet, Boost), wand release button.

Cleaning Modes: Hard Floor (gentle suction), Carpet (standard suction), Boost (maximum suction for deep cleaning). Settings: Brushroll on/off switch for delicate rugs, LED headlights (always on when powered). Maintenance: Dust cup release button, filter access door.

Cleaning Modes & Attachments

Use the mode selector to switch between Hard Floor, Carpet, and Boost modes.

1. Hard Floor Mode: For tiles, wood, and laminate floors.
2. Carpet Mode: For low to medium-pile carpets.
3. Boost Mode: For high-pile carpets and deep cleaning.
4. Attachments: Crevice tool for tight spaces, dusting brush for surfaces, upholstery tool for furniture.

Tip: Use the wand and hose for above-floor cleaning with attachments.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press the release button and empty after each use.
2. Clean filters: Rinse foam and felt filters monthly; air dry completely.
3. Check brushroll: Remove debris and hair regularly.
4. Inspect hose and wand: Clear any blockages.
5. Wipe exterior: Use a dry cloth to clean the vacuum body.

WARNING! Unplug the vacuum before performing any maintenance.

Storage

Store the vacuum in a cool, dry place.

Wrap the power cord around the cord hooks. Store attachments on onboard holders. Ensure the dust cup is empty before storage.

CAUTION! Do not store the vacuum near heat sources or in damp areas.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug the vacuum for 30 minutes, then plug back in.

Service: 1-800-798-7398; www.sharkclean.com