Shark POWER PET EP722 Vacuum Cleaner Manual

The Shark POWER PET EP722 is a powerful upright vacuum cleaner specifically designed for pet owners, featuring advanced suction technology, a motorized brushroll for deep carpet cleaning, Anti-Allergen Complete Seal technology, LED headlights, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Attachments and Accessories 7. Operating Instructions 8. Maintenance and Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, Motorized brushroll, LED headlights, Dust cup with emptying system, Handle with controls, Hose with wand, Various cleaning attachments.

Feature	Description
Motorized Brushroll	Deep cleans carpets and removes embedded pet hair
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Large Capacity Dust Cup	Easy-empty, no-touch dust cup with capacity indicator
Powerful Suction	Maintains consistent suction across all floor types
Multi-Surface Cleaning	Automatically adjusts height for carpets and hard floors
Pet Power Brush	Special attachment for removing pet hair from upholstery
Crevice Tool	For tight spaces and corners
Dusting Brush	For delicate surfaces and dusting
Upholstery Tool	For cleaning furniture and stairs

Assembly Instructions

Unpack and inspect all contents. Assemble on a flat surface.

Attach the handle: Align handle with vacuum body and secure with provided screws.
Connect the hose: Insert hose end into vacuum body until it clicks into place.
Attach wand: Connect extension wand to hose and secure locking mechanism.
Install attachments: Store attachments on provided docking station or caddy.
Plug into power outlet: Ensure power cord is fully unwound before use.

WARNING! Ensure all connections are secure before operation. Keep fingers away from brushroll during assembly.

First-Time Setup

Before first use, complete these setup steps.

Check filter installation: Ensure both pre-motor and post-motor filters are properly seated.
Test brushroll operation: Turn on vacuum and verify brushroll spins freely.
Adjust cleaning mode: Select appropriate setting for your floor type (carpet/hard floor).
Test attachments: Connect each attachment to ensure proper fit and function.
Familiarize with controls: Locate power switch, brushroll on/off, and suction controls.

CAUTION! Do not use vacuum without filters installed. Keep hair, loose clothing, and fingers away from brushroll.

Specifications

Model: POWER PET EP722
Power: 120V, 60Hz, 12 Amps
Cord Length: 25 feet
Dust Cup Capacity: 1.3 quarts
Weight: 15.2 lbs
Cleaning Path Width: 10 inches
Filtration: Anti-Allergen Complete Seal with HEPA filter
Brushroll Type: Motorized, self-cleaning
Warranty: 5-year limited warranty
Operating Temperature: 40°F to 104°F (4°C to 40°C)

Controls and Settings

Main controls located on handle: Power button, Brushroll on/off, Suction control slider.

Handle Controls: POWER (on/off), BRUSHROLL (enable/disable motorized brush), SUCTION CONTROL (adjust suction power).

Cleaning Modes: Carpet mode (brushroll active), Hard floor mode (brushroll off), Bare floor setting (suction optimized). Settings: Height adjustment (automatic), LED lights (always on when powered), Filter reset indicator (alerts when filter needs cleaning).

Attachments and Accessories

Included accessories: Pet Power Brush, Crevice Tool, Dusting Brush, Upholstery Tool, Extension Wand.

Pet Power Brush: For removing embedded pet hair from carpets and upholstery.
Crevice Tool: For tight spaces, corners, and along baseboards.
Dusting Brush: For delicate surfaces, lampshades, and blinds.
Upholstery Tool: For furniture, stairs, and car interiors.
Extension Wand: Extends reach for above-floor cleaning.

Tip: Store attachments on provided caddy for easy access during cleaning.

Operating Instructions

For optimal cleaning performance on various surfaces.

Power on: Press power button on handle.
Select floor type: Vacuum automatically adjusts for carpets/hard floors.
Begin cleaning: Push vacuum forward and back in overlapping strokes.
Use attachments: Turn off vacuum, detach hose, connect desired attachment.
Empty dust cup: Press release button when full indicator shows red.
Turn off: Press power button and unplug from outlet.
Store: Wrap cord around cord hooks, store attachments in designated areas.

WARNING! Do not vacuum wet surfaces, flammable materials, or sharp objects. Always turn off and unplug before maintenance.

Maintenance and Cleaning

Regular maintenance ensures optimal performance and longevity.

Empty dust cup: After each use or when full indicator shows red.
Clean filters: Rinse pre-motor filter monthly; replace HEPA filter every 12-18 months.
Clear brushroll: Regularly remove hair and debris wrapped around brushroll.
Check for blockages: Inspect hose, wand, and attachments for obstructions.
Clean exterior: Wipe with damp cloth; do not use harsh chemicals.

CAUTION! Always unplug vacuum before performing any maintenance. Allow filters to dry completely before reinstalling.

Regulatory Information

UL Listed: Certified for safety in the United States and Canada. FCC Compliance: Meets FCC Part 15 Subpart B requirements for unintentional radiators. Copyright © 2023 SharkNinja Operating LLC. All rights reserved. Shark and POWER PET are registered trademarks. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup or clog	Empty dust cup; check for blockages in hose, wand, and attachments.
Brushroll not spinning	Obstruction or belt issue	Turn off and unplug; clear debris from brushroll; check belt condition.
Vacuum won't turn on	Power connection	Check power outlet; ensure cord is properly plugged in; check circuit breaker.
Overheating	Clogged filters or blockage	Clean filters; check for obstructions; allow vacuum to cool for 45 minutes.
Unusual noise	Foreign object in brushroll or motor	Turn off immediately; inspect brushroll area; remove any foreign objects.
LED lights not working	Bulb failure	Contact customer service for replacement; does not affect cleaning performance.

Reset: Unplug for 45 minutes to reset thermal protection if overheated.

Service: 1-800-798-7398; www.sharkclean.com