Shark Pet Clean V1504C Vacuum Cleaner Manual

The Shark Pet Clean V1504C is a powerful corded upright vacuum cleaner designed for homes with pets. It features a motorized brush roll for deep carpet cleaning, a HEPA filter to capture allergens, a large dust cup capacity, multiple cleaning modes (carpet, hard floor, above-floor), a detachable canister for portable cleaning, a crevice tool, a pet upholstery tool, and a 25-foot power cord. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, Motorized brush roll, HEPA filtration system, Large dust cup, Detachable canister, Hose and wand, Cleaning attachments (crevice tool, pet upholstery tool), Power cord with wrap.

FeatureDescription
Motorized Brush RollDeep cleans carpets and removes embedded pet hair
HEPA FiltrationCaptures 99.9% of dust and allergens
Large Dust CupReduces frequency of emptying
Detachable CanisterConverts to a portable cleaner for stairs and above-floor cleaning
Crevice ToolCleans tight spaces and along edges
Pet Upholstery ToolRemoves pet hair from furniture and car interiors
Carpet/Hard Floor SelectorAdjusts brush roll for different floor types
Power Cord (25 ft)Provides extended reach without changing outlets
On/Off SwitchControls power to the vacuum
Brush Roll On/OffDisengages brush roll for delicate rugs or hard floors

Assembly & Setup

Unpack all parts and inspect for damage. Assemble before first use.

  1. Attach the handle: Align the handle with the upright body and push down until it clicks into place.
  2. Install the hose and wand: Connect the hose to the port on the vacuum body. Attach the wand to the hose.
  3. Attach cleaning tools: Store the crevice tool and pet upholstery tool on the provided dock or attach to the wand as needed.
  4. Unwrap the power cord: Fully extend the cord from the cord wrap.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in the vacuum and select the appropriate cleaning mode.

  1. Select floor type: Use the Carpet/Hard Floor selector switch on the vacuum body.
  2. Turn on: Press the On/Off switch on the handle.
  3. Begin cleaning: Push the vacuum forward and back in slow, overlapping strokes.
  4. Use attachments: Detach the canister to clean stairs, furniture, or other above-floor areas.

CAUTION! Keep the vacuum away from water and liquids. Do not vacuum up large objects or sharp debris.

Specifications

Controls and Settings

Main controls are located on the handle and body of the vacuum.

Handle: On/Off switch, Brush Roll on/off button (for hard floors/delicate rugs).

Body: Carpet/Hard Floor selector switch, Dust cup release button, Hose release latch, Cord wrap hooks.

Settings: Carpet mode (brush roll engaged for deep cleaning), Hard Floor mode (brush roll can be disengaged to prevent scattering debris), Above-Floor mode (using detachable canister and tools).

Cleaning Modes & Attachments

Use the appropriate mode and tool for each cleaning task.

  1. Upright Carpet Cleaning: Set selector to CARPET. Ensure brush roll is ON. Vacuum in slow, methodical passes.
  2. Hard Floor Cleaning: Set selector to HARD FLOOR. For best results, turn brush roll OFF to avoid scattering debris.
  3. Above-Floor Cleaning: Press the hose release latch to detach the canister. Attach the wand and desired tool (crevice or pet tool).
  4. Using the Pet Upholstery Tool: Attach to the wand. Use on furniture, car seats, and stairs to effectively remove embedded pet hair.

Tip: For high-pile carpets, make multiple passes in different directions for a thorough clean.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

  1. Empty the Dust Cup: Press the release button and remove the cup. Empty contents into trash. Do not overfill.
  2. Clean the Filter: Remove the HEPA filter every 3 months (or as needed). Rinse under cold water and let air dry for 24 hours completely before reinstalling.
  3. Check for Brush Roll Blockages: Unplug the vacuum. Turn it over and remove any hair or string wrapped around the brush roll using scissors or the provided cleaning tool.
  4. Inspect the Hose and Attachments: Ensure air pathways are clear of clogs.
  5. Store Properly: Wrap the power cord around the hooks. Store attachments on the dock.

WARNING! Always unplug the vacuum before performing any maintenance. Never use the vacuum without the filter installed.

Regulatory Information

This appliance complies with FCC Part 15. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark and Pet Clean are trademarks of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onNot plugged in / tripped outletCheck power cord connection. Try a different outlet. Check household circuit breaker.
Loss of suctionFull dust cup / clogged filter / blockageEmpty dust cup. Check and clean HEPA filter. Check hose, wand, and brush roll for clogs.
Brush roll not spinningBrush roll off / blockage / belt issueEnsure brush roll is set to ON. Clear any hair/debris wrapped around the roll. For belt issues, contact customer service.
Vacuum scattering debris on hard floorsBrush roll engagedTurn the brush roll OFF using the button on the handle when cleaning hard floors.
Unusual noise or smellBlockage / motor issueImmediately turn off and unplug. Check for and remove any blockages. If noise persists, contact customer service.

Reset: Unplug the vacuum for 60 seconds, then plug back in.

Service: 1-800-798-7398; www.sharkclean.com

Shark Pet Clean V1504C Vacuum Cleaner Manual © - All Rights Reserved 2025