Shark NZ801UKT Vacuum Cleaner Manual

The Shark NZ801UKT is a versatile upright vacuum cleaner featuring DuoClean PowerFins technology, Anti-Hair Wrap brushroll, LED headlights, a large-capacity dust cup, multiple cleaning modes (Carpet, Hard Floor, Power), and a detachable pod for portable cleaning. It includes various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance 10. Care & Storage 11. Regulatory Information 12. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, DuoClean PowerFins floor nozzle, detachable pod, wand, hose, and accessory storage caddy.

FeatureDescription
DuoClean PowerFinsDual brushroll system for carpets and hard floors
Anti-Hair Wrap brushrollPrevents hair tangles on the main brushroll
LED headlightsIlluminates dark areas under furniture
Large dust cupEasy-empty, 0.9L capacity
Detachable podConverts to a portable vacuum for above-floor cleaning
Cleaning modesCarpet, Hard Floor, and Power mode for deep cleaning
Accessory storageIntegrated caddy for crevice tool, dusting brush, and upholstery tool
Wand release pedalQuickly detaches the wand for storage or accessory use
Power cordLong cord with cord wrap hooks
HEPA filterCaptures 99.9% of dust and allergens

Assembly & Setup

Unpack all parts and inspect for damage. Assemble on a flat, stable surface.

  1. Attach the wand: Insert the wand into the main body until it clicks securely.
  2. Connect the hose: Attach the hose to the port on the back of the vacuum.
  3. Install floor nozzle: Slide the DuoClean nozzle onto the wand until it locks.
  4. Store accessories: Place the crevice tool, dusting brush, and upholstery tool in the storage caddy.
  5. Plug into a standard electrical outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure all filters are installed and the dust cup is empty.

  1. Power on: Press the power button on the main body.
  2. Select cleaning mode: Use the mode selector switch (Carpet, Hard Floor, Power).
  3. Begin vacuuming: Push the vacuum forward and back in slow, overlapping strokes.
  4. Empty dust cup: Press the release button and empty contents into a trash bin.
  5. Detach pod: Press the pod release button to convert to a portable vacuum for stairs or furniture.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from moving parts.

Specifications

Controls and Settings

Main body controls: Power button, Mode selector switch (Carpet/Hard Floor/Power), Pod release button, Wand release pedal.

Pod controls: Power button, Suction control slider, Hose release button.

Settings: Carpet mode (for medium-pile carpets), Hard Floor mode (for tiles, wood, laminate), Power mode (max suction for deep cleaning). Filter access: Open latches on the back to access HEPA and pre-motor filters.

Using Attachments

For above-floor cleaning, detach the pod or use the hose directly.

  1. Detach the pod: Press the release button on the main body.
  2. Select attachment: Choose from crevice tool, dusting brush, or upholstery tool.
  3. Connect: Insert the attachment into the end of the hose or pod wand.
  4. Turn on: Press the power button on the pod.
  5. Adjust suction: Use the slider on the pod for delicate surfaces.

Tip: Use the crevice tool for tight spaces, dusting brush for shelves, and upholstery tool for sofas and curtains.

Cleaning Modes

Optimize cleaning for different surfaces.

  1. Carpet Mode: Default setting for most carpets. Brushroll spins at standard speed.
  2. Hard Floor Mode: Reduces brushroll speed to prevent scattering debris. Use for tiles, wood, vinyl.
  3. Power Mode: Increases suction power for deep cleaning embedded dirt. Use for high-traffic areas.
  4. To switch modes: Turn the selector switch on the main body while the vacuum is running.

WARNING! Do not use Hard Floor mode on carpets as it may reduce cleaning effectiveness.

Maintenance

Regular maintenance ensures optimal performance.

  1. Empty dust cup: After each use or when full. Press the release button and empty into trash.
  2. Clean filters: Wash the foam and felt filters every 3 months. Replace HEPA filter every 12 months.
  3. Check brushroll: Regularly remove hair and debris wrapped around the brushroll.
  4. Inspect hose and wand: Clear any blockages with a long, flexible object.
  5. Store properly: Wrap the cord around the hooks and store in a dry place.

CAUTION! Always unplug the vacuum before performing any maintenance. Allow filters to dry completely before reinstalling.

Care & Storage

Unplug before cleaning. Wipe exterior with a damp cloth. Do not immerse in water.

CAUTION! Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Regulatory Information

Complies with EU directives for electrical safety and electromagnetic compatibility. CE marked. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.co.uk or contact 0800 862 0453 (UK).

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord/outletCheck plug is secure; try a different outlet; ensure power button is pressed.
Loss of suctionFull dust cup/clogEmpty dust cup; check hose, wand, and nozzle for blockages; clean filters.
Brushroll not spinningHair/debris wrapUnplug and remove debris from brushroll; ensure mode is set to Carpet or Hard Floor.
OverheatingClogged filters/full dust cupUnplug and let cool for 60 minutes. Empty dust cup and clean all filters.
Unusual noiseForeign object in airwayUnplug and inspect hose, wand, and nozzle for obstructions.

Reset: Unplug for 60 minutes to reset thermal cut-off.

Service: 0800 862 0453; www.sharkclean.co.uk

Shark NZ801UKT Vacuum Cleaner Manual © - All Rights Reserved 2025