Shark NZ Series Vacuum Cleaner Manual

The Shark NZ Series is a versatile upright vacuum cleaner designed for powerful deep cleaning on carpets and hard floors. It features DuoClean technology, Anti-Allergen Complete Seal, LED headlights, a large dust cup capacity, multiple cleaning modes, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, DuoClean floor nozzle, wand, hose, dust cup, and accessory storage caddy.

FeatureDescription
DuoClean TechnologyCombines bristle brush and soft roller for carpets and hard floors
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
LED HeadlightsIlluminates dark areas under furniture
Large Dust CupEasy-to-empty, no bags required
Cleaning ModesUpright, handheld, and above-floor modes
Accessory StorageIntegrated caddy for crevice tool, dusting brush, and upholstery tool
Power SwitchTurns vacuum on/off
Suction ControlAdjusts suction power for different surfaces
Wand ReleaseConverts to handheld vacuum
Floor Nozzle ReleaseLifts for cleaning under furniture

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat surface.

  1. Attach the wand: Insert the wand into the main body until it clicks.
  2. Connect the hose: Attach the hose to the wand and main body ports.
  3. Install floor nozzle: Slide the DuoClean nozzle onto the wand base until secure.
  4. Store attachments: Place crevice tool, dusting brush, and upholstery tool in the caddy.
  5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers clear of moving parts.

First-Time Use

Plug in the vacuum; follow these steps for initial operation.

  1. Select cleaning mode: Use upright for floors, or detach wand for above-floor cleaning.
  2. Adjust suction: Use suction control dial for carpets (high) or hard floors (low).
  3. Empty dust cup: Ensure dust cup is empty before first use.
  4. Test attachments: Try each accessory to ensure proper connection.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brush roll.

Specifications

Controls and Settings

Main controls located on the vacuum body. Power Switch: On/Off button. Suction Control: Dial for adjusting power. Wand Release: Button to detach wand for handheld use. Floor Nozzle Release: Lever to lift nozzle.

Indicator Lights: LED lights on floor nozzle indicate power status. Filter Check Light: Alerts when filters need cleaning.

Settings: Upright mode for floors, Handheld mode for stairs and above-floor cleaning, Suction control for surface type.

Using Attachments

Attach tools to the wand or hose for specialized cleaning.

  1. Turn off and unplug vacuum before changing attachments.
  2. Select tool: Crevice tool for tight spaces, dusting brush for surfaces, upholstery tool for furniture.
  3. Connect: Insert tool into the end of the wand or hose.
  4. Select handheld mode: Detach wand if needed for above-floor cleaning.

Tip: Store attachments in the caddy to keep them organized and accessible.

Cleaning Modes

Three main modes: Upright, Handheld, and Above-Floor.

  1. Upright Mode: Use for carpets and hard floors. Engage brush roll with foot pedal.
  2. Handheld Mode: Press wand release, detach wand, and use with hose and tools.
  3. Above-Floor Mode: Use hose and attachments for ceilings, curtains, and furniture.
  4. Suction Adjustment: Turn dial to match surface (high for carpets, low for hard floors).

WARNING! Do not use handheld mode to vacuum water or other liquids. Unplug after use.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup: Press release button, remove cup, and empty into trash.
  2. Clean filters: Remove foam and felt filters; rinse with water monthly. Air dry completely before reinstalling.
  3. Check brush roll: Remove debris from brush roll regularly.
  4. Inspect hose and wand: Clear any blockages.

CAUTION! Unplug vacuum before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord not plugged inCheck power outlet and cord connection.
Loss of suctionFull dust cup or clogEmpty dust cup; check hose, wand, and nozzle for blockages.
Brush roll not spinningDebris tangled in brushTurn off, unplug, and remove debris from brush roll.
OverheatingClogged filters or blocked airflowClean filters; check for obstructions; let vacuum cool for 60 minutes.
Attachments not workingImproper connectionEnsure attachments are fully inserted into wand or hose.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com

Shark NZ Series Vacuum Cleaner Manual © - All Rights Reserved 2025