Shark NV85 Vacuum Cleaner Manual

The Shark NV85 is a versatile upright vacuum cleaner featuring DuoClean technology, Lift-Away functionality, Anti-Allergen Complete Seal, LED headlights, and a swivel steering head. It is designed for deep carpet cleaning and above-floor cleaning with multiple attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: DuoClean PowerFins brushroll, Lift-Away pod, Anti-Allergen Complete Seal filtration system, LED headlights, swivel steering, and accessory storage.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into body until it clicks into place.
2. Install wand: Insert wand into hose connection until secure.
3. Attach floor nozzle: Connect floor nozzle to wand or Lift-Away pod.
4. Store attachments: Place crevice tool, dusting brush, and upholstery tool in storage caddy.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; ensure all parts are securely connected.

1. Select mode: Use as upright or detach pod for Lift-Away mode.
2. Adjust height: Set floor nozzle height appropriate for carpet or hard floor.
3. Turn on: Press power switch; LED lights will illuminate.
4. Begin cleaning: Push vacuum forward and back in slow, overlapping strokes.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

• Model: Shark NV85.
• Technology: DuoClean with PowerFins brushroll.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Attachments: Crevice tool, dusting brush, upholstery tool, pet multi-tool.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.3 quarts.
• Power Source: 120V AC, 60Hz.
• Weight: 15.2 lbs.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, brushroll on/off button, hose release button.

Upright mode: Use height adjustment lever for carpets. Lift-Away mode: Detach pod for portable cleaning. Brushroll control: Turn off for hard floors to prevent scattering debris. Suction control: Automatic based on floor type; no manual adjustment.

Using Attachments

For above-floor cleaning: detach wand and connect desired tool.

1. Turn off and unplug vacuum before changing attachments.
2. Remove wand from floor nozzle or Lift-Away pod.
3. Connect tool (crevice, dusting brush, upholstery) to wand end.
4. Plug in vacuum and turn on to use.

Tip: Use crevice tool for tight spaces; dusting brush for shelves; upholstery tool for furniture.

Lift-Away Mode

Detach pod for portable cleaning of stairs, furniture, and above-floor areas.

1. Press release button on back of vacuum to detach pod.
2. Carry pod by handle; hose remains attached.
3. Connect wand and desired attachment to hose.
4. Turn on using power switch on pod.
5. Reattach pod by aligning with upright body and pressing until it clicks.

WARNING! Ensure pod is securely attached before using in upright mode.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty into trash.
2. Clean filters: Rinse foam and felt filters monthly; air dry completely before reinserting.
3. Check brushroll: Remove debris wrapped around brushroll regularly.
4. Inspect hose and attachments: Clear clogs if suction reduces.

CAUTION! Unplug vacuum before maintenance. Do not use wet filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds; plug back in.

Service: 1-800-798-7398; www.sharkclean.com