Shark NV80SHER Vacuum Cleaner Manual

The Shark NV80SHER is a versatile upright vacuum cleaner featuring DuoClean PowerFins technology, Anti-Allergen Complete Seal with HEPA filter, LED headlights, and a Lift-Away pod for portable cleaning. It includes a variety of attachments for above-floor cleaning and is designed for use on multiple surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with DuoClean brushroll, Lift-Away pod, wand, hose, and accessory kit.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach wand: Insert wand into vacuum body until it clicks.
2. Connect hose: Attach hose to wand and pod connection points.
3. Install accessories: Clip crevice tool and dusting brush onto storage caddy.
4. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; select appropriate settings.

1. Select surface setting: Use POWER/SURFACE switch for CARPET or HARD FLOOR.
2. Adjust brushroll: Press BRUSHROLL ON/OFF for delicate rugs.
3. Begin cleaning: Push vacuum forward on floor.
4. Use Lift-Away mode: Press RELEASE button to detach pod for stairs/upholstery.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

• Model: Shark NV80SHER.
• Technology: DuoClean PowerFins with Anti-Allergen Complete Seal.
• Filtration: HEPA filter captures 99.9% of particles.
• Attachments: Crevice tool, dusting brush, upholstery tool, pet multi-tool.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.3 quarts.
• Power Source: 120V AC, 60Hz.
• Weight: 15.2 lbs.

Controls and Settings

Main controls located on vacuum body. POWER/SURFACE Switch: Turns on vacuum and selects floor type. RELEASE Button: Detaches Lift-Away pod. BRUSHROLL ON/OFF: Toggles brushroll. DUMP BUTTON: Empties dust cup.

LED Indicators: Power ON (blue), Brushroll Active (green), Full Dust Cup (red).

Settings: CARPET mode (higher suction), HARD FLOOR mode (gentle suction), BRUSHROLL OFF for delicate surfaces. Lift-Away mode for portable cleaning.

Using Attachments

Accessories stored on caddy: Crevice tool, dusting brush, upholstery tool, pet multi-tool.

1. Detach wand: Press wand release button.
2. Select tool: Attach to end of wand or hose.
3. Clean: Use for stairs, furniture, corners, etc.
4. Return tool: Store back on caddy.

Tip: Ensure vacuum is turned off when changing attachments.

Cleaning Modes

Upright mode: For carpets and large floor areas. Lift-Away mode: Detach pod for portable cleaning.

1. Upright cleaning: Use on floors with appropriate surface setting.
2. Activate Lift-Away: Press RELEASE button; carry pod by handle.
3. Above-floor cleaning: Use wand and attachments for ceilings, curtains, etc.
4. Return to base: Reattach pod until it clicks.

WARNING! Do not use vacuum to pick up liquids, sharp objects, or hot ashes.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press DUMP BUTTON over trash can.
2. Clean filters: Rinse HEPA and pre-motor filters monthly (air dry 24 hrs).
3. Check brushroll: Remove debris wrapped around brushroll.
4. Inspect hose/wand: Clear clogs if suction reduces.

CAUTION! Unplug vacuum before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if unit overheats.

Service: 1-800-798-7398; sharkclean.com