Shark NV801UK SERIES Vacuum Cleaner Manual

The Shark NV801UK SERIES is an upright vacuum cleaner with powerful suction, Lift-Away technology for portable cleaning, Anti-Allergen Complete Seal technology, LED headlights, and a multi-surface brush roll. It includes various attachments for above-floor cleaning and is designed for use in homes with carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, dust cup, Lift-Away pod, floor nozzle with brush roll, wand, hose, and various cleaning attachments.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach the wand: Insert into the vacuum body until it clicks.
2. Connect the hose: Attach to the port on the vacuum body.
3. Attach floor nozzle: Slide onto the wand until secure.
4. Plug into a suitable power outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from moving parts.

First-Time Use

Before vacuuming, ensure area is clear of large debris.

1. Select cleaning mode: Choose upright for floors or Lift-Away for above-floor cleaning.
2. Adjust settings: Use brush roll control for carpets or hard floors.
3. Begin vacuuming: Move slowly over surfaces for effective cleaning.
4. Empty dust cup: Press release button and empty when full.

CAUTION! Do not vacuum wet spills, burning materials, or sharp objects.

Specifications

• Model: NV801UK SERIES.
• Type: Upright with Lift-Away technology.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Dust Cup Capacity: 1.5 litres.
• Cord Length: 7.5 metres.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Power Source: 220-240V AC, 50Hz.
• Weight: 6.8 kg.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on vacuum body. Power Switch: Turns motor on/off. Brush Roll Control: Turns brush roll on/off for delicate rugs. Lift-Away Release: Detaches pod for portable cleaning.

Settings: Upright mode for floors; Lift-Away mode for stairs, furniture, and ceilings. Suction power is automatically optimized for surface type when brush roll is enabled.

Using Attachments

Attach tools to hose or wand for above-floor cleaning.

1. Detach Lift-Away pod if needed.
2. Select attachment: Crevice tool for tight spaces; dusting brush for surfaces; upholstery tool for furniture.
3. Connect to hose or wand end.
4. Turn on vacuum and clean.

Tip: Ensure attachments are clicked securely into place to prevent air leaks.

Cleaning Modes

Two main modes: Upright and Lift-Away.

1. Upright Mode: For carpets and hard floors. Use full vacuum assembly.
2. Lift-Away Mode: Press release button to detach pod. Use for stairs, curtains, furniture, and cars.
3. Brush Roll On: For carpets; disengage for hard floors or delicate rugs.
4. LED Lights: Automatically illuminate in dark areas.

WARNING! Do not use Lift-Away mode to vacuum water or liquids.

Maintenance

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release; empty into bin. Clean filter monthly.
2. Check brush roll: Remove debris wrapped around roll regularly.
3. Clean filters: Rinse HEPA and pre-motor filters with water; air dry completely before reinserting.
4. Inspect hose and attachments: Clear blockages if suction reduces.

CAUTION! Unplug vacuum before maintenance. Ensure filters are completely dry before use.

Care & Storage

Store in a cool, dry place. Wrap cord around hooks.

CAUTION! Do not store with wet filters. Keep away from heat sources.

Regulatory Information

Complies with EU directives for electrical safety and electromagnetic compatibility. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.co.uk or contact 0800 862 0453.

Troubleshooting

Reset: Unplug for 10 minutes if motor overheats.

Service: 0800 862 0453; www.sharkclean.co.uk