Shark NV80 Vacuum Cleaner Manual

The Shark NV80 is a versatile upright vacuum cleaner featuring DuoClean technology, Lift-Away capability, Anti-Allergen Complete Seal, LED headlights, and a swivel steering handle. It includes multiple attachments for above-floor cleaning and is designed for deep cleaning carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized floor nozzle with DuoClean brushes, Lift-Away pod, Anti-Allergen Complete Seal filtration system, LED headlights, swivel steering handle, and accessory storage.

Assembly & Setup

Unpack and inspect all components. Assemble before first use.

1. Attach handle: Insert handle into body until it clicks into place.
2. Install accessories: Store crevice tool, dusting brush, and upholstery tool in built-in caddy.
3. Connect hose: Attach hose to pod inlet; ensure secure connection.
4. Plug into electrical outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Plug in vacuum; follow operational steps.

1. Select mode: Choose upright or Lift-Away mode based on cleaning needs.
2. Adjust height: Set floor nozzle to appropriate setting for carpet or hard floor.
3. Turn on: Press power switch; engage brush roll for carpets.
4. Use attachments: Detach hose and select appropriate tool for above-floor cleaning.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll and openings.

Specifications

• Model: Shark NV80.
• Technology: DuoClean with motorized brush roll and soft roller.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Attachments: Crevice tool, dusting brush, upholstery tool, pet multi-tool.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.3 dry quarts.
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, brush roll on/off. Body: Lift-Away release, height adjustment, dust cup release.

Settings: Height adjustment (low, medium, high), brush roll on/off for carpets vs. hard floors, suction control (via accessory selection).

LED indicators: Power on (blue light), brush roll engaged (green light).

Using Attachments

For above-floor cleaning: Use Lift-Away mode with hose and tools.

1. Detach pod: Press Lift-Away release button.
2. Select tool: Attach crevice tool, dusting brush, or upholstery tool to hose end.
3. Clean: Use tool on stairs, upholstery, ceilings, or tight spaces.
4. Reattach: Return pod to upright body until it clicks.

Tip: Ensure hose is fully extended and tools are securely attached.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty into trash; reinstall.
2. Clean filters: Remove pre-motor and post-motor filters; tap out debris; wash if needed (air dry completely).
3. Clear brush roll: Turn off and unplug; remove debris from brush roll with scissors or cleaning tool.
4. Check hose and attachments: Remove clogs with long object.

WARNING! Always unplug vacuum before maintenance. Do not use damaged filters.

Storage & Care

Store in cool, dry place. Wrap cord around cord hooks. Ensure dust cup is empty and filters are dry.

CAUTION! Do not store near heat sources or with wet filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds; plug back in.

Service: 1-800-798-7398; sharkclean.com