Shark NV80 26 Vacuum Cleaner Manual

The Shark NV80 26 is a versatile upright vacuum cleaner featuring DuoClean PowerFins technology, Anti-Allergen Complete Seal with HEPA filter, LED headlights, Lift-Away functionality, and a self-cleaning brushroll. It is designed for deep cleaning on carpets and hard floors, capturing dust and allergens. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: DuoClean PowerFins brushroll, Anti-Allergen Complete Seal system, LED headlights, Lift-Away pod, crevice tool, dusting brush, upholstery tool, and wand.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into body until it clicks securely.
2. Install wand: Insert wand into socket on back of vacuum.
3. Attach hose: Connect hose to port on front of vacuum.
4. Attach floor nozzle: Align nozzle with body and press until locked.
5. Plug into AC power outlet.

WARNING! Ensure all parts are securely connected to prevent injury or damage. Keep cord away from heated surfaces.

First-Time Use

Before cleaning, perform initial setup.

1. Check filters: Ensure HEPA and pre-motor filters are installed.
2. Adjust height: Set floor selector to appropriate setting (carpet/hard floor).
3. Power on: Press power button on handle.
4. Test suction: Verify suction by placing hand over nozzle.
5. Empty dust cup: Ensure dust cup is empty before first use.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from brushroll.

Specifications

• Model: Shark NV80 26.
• Technology: DuoClean PowerFins with self-cleaning brushroll.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Attachments: Crevice tool, dusting brush, upholstery tool, wand.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.3 dry quarts.
• Weight: 15.2 lbs.
• Power Source: 120V AC, 60Hz.
• Warranty: 5-year limited warranty.

Controls and Settings

Access controls via handle and body buttons.

Handle: Power button, suction control slider. Body: Floor selector (carpet/hard floor), wand release, dust cup release, hose release.

Settings: Suction control (High/Low), floor selector, brushroll on/off (for hard floors). Use power button to turn vacuum on/off. LED lights activate automatically when powered on.

Using Attachments

Attachments for above-floor cleaning: crevice tool, dusting brush, upholstery tool.

1. Detach wand: Press wand release button and pull wand out.
2. Attach tool: Insert desired tool into end of wand or hose.
3. Select suction: Use suction control for delicate surfaces.
4. Clean: Guide tool over surfaces; empty dust cup as needed.

Tip: Use dusting brush for shelves and upholstery tool for furniture. Empty dust cup when full.

Cleaning Modes

Upright mode: For floor cleaning. Lift-Away mode: Detach pod for portable cleaning.

1. Upright cleaning: Ensure floor nozzle is attached; select floor type.
2. Lift-Away: Press release button on pod; lift pod away from floor nozzle.
3. Above-floor cleaning: Use wand and attachments with Lift-Away pod.
4. Brushroll control: Turn brushroll off for hard floors to prevent scattering debris.

WARNING! Do not use Lift-Away mode to clean stairs unless pod is securely held. Avoid dropping pod.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty after each use.
2. Clean filters: Rinse HEPA and pre-motor filters every 3 months; air dry 24 hours.
3. Clear brushroll: Remove debris from brushroll monthly.
4. Check hose: Remove clogs using long object.
5. Inspect cord: Check for damage before each use.

CAUTION! Unplug before maintenance. Do not use damaged cord or filters.

Storage & Handling

Store in cool, dry place. Wrap cord around hooks.

CAUTION! Do not store near heat sources. Hang accessories on storage clips.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds; plug back in.

Service: 1-800-798-7398; sharkclean.com