Shark NV750 Series Vacuum Cleaner Manual

The Shark NV750 Series is an upright vacuum cleaner with Lift-Away technology, DuoClean floor nozzle, Anti-Allergen Complete Seal, LED headlights, and advanced swivel steering. It features multiple cleaning modes, a large dust cup capacity, washable filters, and various attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Lift-Away pod, DuoClean floor nozzle, Anti-Allergen Complete Seal filtration system, LED headlights, swivel steering handle, dust cup, washable filters, and accessory storage.

Assembly & Setup

Unpack and inspect all contents. Assemble following steps.

1. Attach handle: Insert handle into main body until it clicks into place.
2. Install floor nozzle: Align nozzle with vacuum body and push until secure.
3. Attach hose: Connect hose to pod and ensure it locks.
4. Install filters: Place foam and felt filters into their compartments.
5. Plug into AC power.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from moving parts.

First-Time Use

Before first use, charge if cordless model; otherwise plug in.

1. Check filters: Ensure foam and felt filters are properly installed.
2. Empty dust cup: Ensure dust cup is empty before use.
3. Select cleaning mode: Choose upright or Lift-Away mode as needed.
4. Adjust settings: Set brush roll on for carpets, off for hard floors.
5. Begin cleaning: Turn on power switch and start vacuuming.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

• Model: Shark NV750 Series.
• Type: Upright vacuum with Lift-Away.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Dust Cup Capacity: 1.5 quarts.
• Cord Length: 25 feet.
• Attachments: Crevice tool, upholstery brush, pet multi-tool.
• Power Source: 120V AC, 60Hz.
• Weight: 15.2 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle Controls: Power switch, brush roll on/off button, suction control slider.

Body Controls: Lift-Away release button, dust cup release, hose release.

Settings: Upright mode for floors, Lift-Away mode for above-floor cleaning, brush roll on for carpets, brush roll off for hard floors/delicate rugs, suction control for adjusting power.

Cleaning Modes

Upright Mode: For floor cleaning with DuoClean nozzle. Lift-Away Mode: Detach pod for stairs, furniture, ceilings.

1. Switch to Lift-Away: Press release button and lift pod away.
2. Select attachment: Choose appropriate tool for the surface.
3. Adjust suction: Use slider for more or less power.
4. Clean: Move nozzle slowly over surface for best results.

Tip: Empty dust cup when full indicator lights up.

Using Attachments

Attachments store on vacuum body.

1. Crevice tool: For tight spaces, corners, edges.
2. Upholstery brush: For sofas, chairs, curtains.
3. Pet multi-tool: Combines bristles and crevice for pet hair.
4. Dusting brush: For delicate surfaces, blinds, lampshades.

WARNING! Ensure attachment is securely clicked into hose before use.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button, empty contents into trash.
2. Clean filters: Rinse foam and felt filters monthly; air dry 24 hours.
3. Check brush roll: Remove debris wrapped around brush roll.
4. Inspect hose: Clear any blockages.
5. Store properly: Wind cord around cord hooks.

CAUTION! Unplug before maintenance. Do not use damaged filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com