Shark NV702UKT Vacuum Cleaner Manual

The Shark NV702UKT is a powerful upright vacuum cleaner featuring DuoClean technology, Anti-Hair Wrap brushroll, LED headlights, Lift-Away functionality for portable cleaning, HEPA filtration, multiple cleaning modes, and a comprehensive set of attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, DuoClean floor nozzle, Lift-Away pod, wand, hose, and accessory set.

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

1. Attach wand: Insert wand into main body until it clicks into place.
2. Connect hose: Attach hose to wand and main body ports.
3. Install floor nozzle: Slide nozzle onto wand until it locks.
4. Insert filters: Place HEPA filter and pre-motor filter as indicated.
5. Plug into power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Before first use, ensure all parts are securely connected.

1. Check filters: Ensure both filters are properly seated.
2. Select floor type: Use mode selector for carpet or hard floor.
3. Power on: Press power switch; LED lights should illuminate.
4. Test suction: On a small area to ensure proper operation.
5. Empty dust cup: After initial test to remove any packaging debris.

CAUTION! Do not vacuum large debris, liquids, or hot ashes.

Specifications

• Model: Shark NV702UKT.
• Technology: DuoClean with Anti-Hair Wrap.
• Filtration: HEPA filter system.
• Power Source: 120V AC, 60Hz.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.5 quarts.
• Attachments: Crevice tool, upholstery tool, dusting brush, pet multi-tool.
• Warranty: 5-year limited warranty.
• Weight: 14.5 lbs.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, mode selector (carpet/hard floor). Body: Wand release, dust cup release, hose release.

LED Indicators: Power on (blue), filter check (red if maintenance needed).

Settings: Carpet mode (increased suction), Hard floor mode (reduced suction for easier glide). Lift-Away: Press release button to detach pod for portable cleaning. Accessory selection: Choose appropriate tool for cleaning task.

Using Attachments

Attach tools to wand or hose end for specialized cleaning.

1. Detach wand: Press wand release button.
2. Select tool: Crevice tool for tight spaces; upholstery tool for furniture; dusting brush for surfaces.
3. Connect: Push tool onto wand or hose until secure.
4. Clean: Use appropriate motion for each tool.
5. Return: Store tools in built-in caddy after use.

Tip: Ensure vacuum is off when changing attachments.

Cleaning Modes

Supports multiple cleaning configurations for different surfaces.

1. Upright mode: For floor cleaning with floor nozzle attached.
2. Lift-Away mode: Detach pod for stairs, furniture, above-floor areas.
3. Handheld mode: Use hose with attachments for spot cleaning.
4. Carpet mode: Higher suction for deep carpet cleaning.
5. Hard floor mode: Lower suction with soft roller for hard surfaces.

WARNING! Do not use hard floor mode on carpets as it may cause damage.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: When full or after each use; press release button.
2. Clean filters: Rinse HEPA filter monthly; replace every 12 months.
3. Check brushroll: Remove debris and hair regularly.
4. Inspect hose: Clear any blockages.
5. Store properly: Wrap cord around hooks; store in dry area.

CAUTION! Unplug before maintenance. Allow filters to dry completely before reinserting.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds, then restart.

Service: 1-800-798-7398; www.sharkclean.com