Shark NV702UK Series Vacuum Cleaner Manual

The Shark NV702UK Series is a powerful upright vacuum cleaner featuring DuoClean technology, Anti-Hair Wrap brushroll, LED headlights, Lift-Away functionality for portable cleaning, HEPA filtration, and multiple attachments for versatile cleaning on various surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Lift-Away Mode 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, DuoClean floor nozzle, Lift-Away pod, wand, hose, and accessory attachments.

FeatureDescription
DuoClean TechnologyCombines bristle brushroll and soft roller for carpets and hard floors
Anti-Hair Wrap BrushrollPrevents hair tangles on the brushroll
LED HeadlightsIlluminates dark areas under furniture
Lift-Away ModeDetachable pod for portable cleaning above floors
HEPA FiltrationCaptures 99.9% of dust and allergens
Power CordLong cord for extended reach
ON/OFF SwitchControls main power
Suction ControlAdjusts suction power for different surfaces
Dust Cup ReleaseButton to empty dust cup
Wand Release PedalFoot pedal to detach wand

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat surface.

  1. Attach the wand: Insert wand into the main body until it clicks.
  2. Connect the hose: Attach hose to the wand and main body ports.
  3. Install floor nozzle: Slide nozzle onto the wand until secure.
  4. Attach accessories: Store crevice tool, dusting brush, and upholstery tool on dock.
  5. Plug into wall outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; turn on power switch.

  1. Select surface setting: Use suction control dial for carpets or hard floors.
  2. Begin vacuuming: Push vacuum forward and back in slow, overlapping strokes.
  3. Use attachments: Detach wand and attach tools for above-floor cleaning.
  4. Empty dust cup: Press release button and empty when full.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

Controls and Settings

Main controls located on handle and body. Handle: ON/OFF switch, suction control dial. Body: Dust cup release, wand release pedal, accessory dock.

Settings: Suction control (Low/High), brushroll on/off for hard floors. Indicators: Filter check light, dust cup full indicator.

Maintenance: Wash filters every 3 months; check brushroll monthly for debris.

Using Attachments

For above-floor cleaning: detach wand and connect desired tool.

  1. Turn off vacuum and unplug.
  2. Press wand release pedal to detach wand.
  3. Attach tool to end of wand or hose.
  4. Plug in and turn on to use.
  5. Common tools: Crevice tool (tight spaces), dusting brush (surfaces), upholstery tool (furniture).

Tip: Ensure attachments are securely clicked into place before use.

Lift-Away Mode

Portable cleaning for stairs, furniture, and ceilings.

  1. Press Lift-Away release button on main body.
  2. Lift pod away from floor nozzle.
  3. 3. Carry pod by handle; use with wand and attachments.
  4. To reattach, align pod with floor nozzle and press down until it clicks.

WARNING! Ensure hose is not twisted or kinked during Lift-Away use.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup after each use.
  2. Clean filters: Rinse HEPA and pre-motor filters every 3 months; air dry 24 hours.
  3. Check brushroll: Remove debris and hair monthly.
  4. Inspect hose and wand for blockages.
  5. Store in a dry, cool place.

CAUTION! Unplug before maintenance. Do not use wet filters.

Regulatory Information

FCC Part 15: Class B device; complies with interference limits. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This product is covered by a 5-year limited warranty.

Troubleshooting

SymptomPossible CauseCorrective Action
Loss of suctionFull dust cup or clogEmpty dust cup; check hose, wand, and nozzle for blockages.
Brushroll not spinningDebris or hair wrapTurn off, unplug, and clear brushroll of obstructions.
Vacuum won't turn onPower cord or outletCheck power cord connection; try different outlet.
Unusual noiseForeign object in airwayTurn off immediately; inspect for and remove object.
OverheatingClogged filter or full dust cupClean filters; empty dust cup; allow to cool for 1 hour.

Reset: Unplug for 1 hour if motor overheats.

Service: 1-800-798-7398; sharkclean.com

Shark NV702UK Series Vacuum Cleaner Manual © - All Rights Reserved 2025