Shark NV650W series Vacuum Cleaner Manual

The Shark NV650W series is a versatile upright vacuum cleaner featuring DuoClean PowerFins technology, Anti-Allergen Complete Seal, LED headlights, a large-capacity dust cup, and multiple cleaning modes for carpets and hard floors. It includes various attachments for above-floor cleaning and is designed for home use with a powerful motor and HEPA filtration system. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: DuoClean PowerFins brushroll, Anti-Allergen Complete Seal system, LED headlights, large dust cup, wand, hose, and various attachments.

Assembly & Setup

Unpack and inspect all parts. Assemble according to instructions.

1. Attach wand: Insert wand into vacuum body until it clicks.
2. Connect hose: Attach hose to wand and vacuum body.
3. Install attachments: Store attachments on holder or connect as needed.
4. Plug into AC power.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from moving parts.

First-Time Use

Plug in vacuum; turn on power switch.

1. Select cleaning mode: Use upright for floors; detach wand for above-floor cleaning.
2. Adjust brushroll: Turn on for carpets; off for hard floors.
3. Empty dust cup: Press release button and empty when full.
4. Use attachments: Select appropriate tool for crevices, upholstery, or dusting.

CAUTION! Do not vacuum large objects or liquids. Keep hair and strings away from brushroll.

Specifications

• Model: Shark NV650W series.
• Technology: DuoClean PowerFins with Anti-Allergen Complete Seal.
• Filtration: HEPA filter captures 99.9% of dust and allergens.
• Dust Cup Capacity: Large capacity, easy-empty design.
• Attachments: Crevice tool, dusting brush, pet multi-tool, upholstery tool.
• Cord Length: Extended reach for large rooms.
• Power Source: 120V AC, 60Hz.
• Weight: Lightweight design for easy maneuverability.

Controls and Settings

Main controls: On/Off switch, brushroll control, wand release, dust cup release.

Operation: Turn on with power switch; select brushroll mode (on for carpets, off for hard floors); detach wand for above-floor cleaning.

Settings: Brushroll on/off, suction power (standard), LED lights (auto-on). Maintenance: Empty dust cup, clean filters, check brushroll for debris.

Using Attachments

Attachments: Crevice tool, dusting brush, pet multi-tool, upholstery tool.

1. Detach wand: Press release button to remove wand.
2. Connect attachment: Insert tool into wand or hose end.
3. Clean: Use crevice tool for tight spaces; dusting brush for surfaces; pet tool for hair.
4. Reattach: Return wand to upright position after use.

Tip: Store attachments on vacuum holder for easy access.

Cleaning Modes

Upright mode: For carpets and hard floors. Handheld mode: For above-floor cleaning.

1. Upright cleaning: Turn on power; push vacuum forward and back.
2. Above-floor cleaning: Detach wand; connect hose and attachment.
3. Brushroll control: Turn off for hard floors to prevent scattering debris.
4. LED lights: Automatically illuminate dark areas.

WARNING! Do not use on wet surfaces. Avoid vacuuming sharp objects.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty into trash.
2. Clean filters: Rinse HEPA and pre-motor filters monthly; air dry completely.
3. Check brushroll: Remove hair and debris; ensure free rotation.
4. Inspect hose and wand: Clear clogs if suction is reduced.

CAUTION! Unplug vacuum before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 30 minutes; plug back in.

Service: 1-800-798-7398; sharkclean.com