Shark NV650 Series Vacuum Cleaner Manual

The Shark NV650 Series is a versatile upright vacuum cleaner featuring DuoClean technology with a soft roller for hard floors and a bristle brush for carpets, Anti-Allergen Complete Seal technology with a HEPA filter, LED headlights, a large-capacity dust cup, lift-away functionality for portable cleaning, and multiple attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: DuoClean floor nozzle, lift-away pod with handle, dust cup with HEPA filter, crevice tool, dusting brush, upholstery tool, and wand.

Feature	Description
DuoClean Technology	Combines soft roller for hard floors and bristle brush for carpets
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Lift-Away Functionality	Detachable pod for portable above-floor cleaning
Large Dust Cup	Easy-to-empty, no bags required
HEPA Filter	Captures fine particles and allergens
Power Switch	Turns vacuum on/off
Brush Roll Switch	Activates/deactivates brush roll for delicate rugs
Handle Controls	Adjust suction power and mode settings
Wand Release	Quick-release button for attaching tools

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into lift-away pod until it clicks securely.
Connect wand: Insert wand into handle or floor nozzle as needed.
Attach floor nozzle: Connect floor nozzle to lift-away pod or wand.
Install filter: Ensure HEPA filter is properly seated in dust cup lid.
Plug into AC power outlet.

WARNING! Ensure all parts are securely connected before use to prevent injury or damage.

First-Time Use

Prepare vacuum for initial cleaning session.

Check filter: Ensure HEPA filter is installed correctly in dust cup lid.
Empty dust cup: Press release button to remove and empty dust cup.
Select mode: Choose upright or lift-away mode based on cleaning needs.
Adjust suction: Use handle controls to set desired suction power.
Begin cleaning: Turn on power switch and start vacuuming.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll and openings.

Specifications

Model Series: NV650.
Technology: DuoClean with Anti-Allergen Complete Seal.
Filtration: HEPA filter included.
Dust Cup Capacity: 1.5 quarts.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, upholstery tool, wand.
Power Source: 120V AC, 60Hz.
Weight: 15.2 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Access controls via handle and floor nozzle. Power Switch: On/Off. Brush Roll Switch: Activates brush roll for carpets; turn off for hard floors or delicate rugs.

Handle Controls: Suction power adjustment (Low/High), mode selector (Upright/Lift-Away). LED Lights: Automatically illuminate when vacuum is on.

Settings: Upright mode for floor cleaning; Lift-Away mode for portable cleaning; Brush Roll on/off for different surfaces.

Using Attachments

Attach tools to wand or handle for above-floor cleaning.

Turn off vacuum before changing attachments.
Select tool: Crevice tool for tight spaces; dusting brush for surfaces; upholstery tool for furniture.
Connect tool: Insert into wand or handle until it clicks.
Turn on vacuum and begin cleaning.

Tip: Use dusting brush on blinds, shelves, and electronics for dust removal.

Cleaning Modes

Supports upright floor cleaning and portable lift-away cleaning.

Upright Mode: Use for carpets and hard floors with floor nozzle attached.
Lift-Away Mode: Press release button to detach pod for stairs, furniture, and above-floor cleaning.
Brush Roll Control: Turn off for delicate rugs or hard floors; turn on for carpets.
Suction Adjustment: Use handle controls to increase or decrease suction as needed.

WARNING! Do not vacuum wet surfaces, liquids, or sharp objects.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button, remove and empty cup after each use.
Clean filters: Rinse HEPA filter and foam filter every 3 months; air dry completely before reinstalling.
Check brush roll: Remove debris wrapped around brush roll regularly.
Inspect hose and attachments: Clear any blockages.
Store properly: Wrap cord around hooks, store in dry area.

CAUTION! Unplug vacuum before performing any maintenance.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check power cord connection; try different outlet; ensure power switch is on.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose and attachments for blockages; clean filters.
Brush roll not spinning	Debris/tangle	Turn off and unplug; remove debris from brush roll; ensure brush roll switch is on.
Vacuum overheating	Clog/filter	Turn off and unplug; check for clogs; clean filters; allow to cool for 60 minutes.
Unusual noise	Foreign object	Turn off and unplug; inspect hose, nozzle, and brush roll for obstructions.

Reset: Turn off and unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com