Shark NV601 Vacuum Cleaner Manual

The Shark NV601 is a versatile upright vacuum cleaner featuring Lift-Away technology, DuoClean floor nozzle, Anti-Allergen Complete Seal with HEPA filter, LED headlights, and multiple cleaning modes for carpets and hard floors. It includes a variety of attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with dust cup, Lift-Away pod, DuoClean floor nozzle, Power cord, On-board accessory storage, and various attachments.

Feature	Description
Lift-Away Technology	Detachable pod for portable cleaning above floors
DuoClean Floor Nozzle	Dual brush rolls for carpets and hard floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens with HEPA filter
LED Headlights	Illuminates debris under furniture
On-Board Storage	Holds crevice tool, dusting brush, and upholstery tool
Power Switch	Turns vacuum on/off
Mode Selector	Switches between carpet and hard floor settings
Wand Release	Releases extension wand for above-floor cleaning
Dust Cup Release	Button to empty dust cup
Handle Controls	Buttons for power and mode selection

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach handle: Insert handle into top of vacuum body until it clicks.
Install floor nozzle: Align nozzle with vacuum body and push until it locks.
Attach hose: Connect hose to front of vacuum pod.
Store attachments: Place crevice tool, dusting brush, and upholstery tool in on-board caddy.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; follow these steps for initial operation.

Select cleaning mode: Use mode selector for carpet or hard floor.
Power on: Press power button on handle.
Adjust suction: Use controls on handle for desired suction level.
Empty dust cup: Press release button to remove and empty dust cup after use.
Check filters: Ensure HEPA and pre-motor filters are properly installed.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from brush rolls.

Specifications

Model: Shark NV601.
Technology: Lift-Away with DuoClean.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Attachments: Crevice tool, dusting brush, upholstery tool, pet multi-tool.
Cord Length: 25 feet.
Dust Cup Capacity: 1.3 quarts.
Power Source: 120V AC, 60Hz.
Weight: 14.5 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Power button: On/off switch on handle. Mode selector: Toggle between carpet and hard floor settings. Suction control: Adjust suction power via handle button. Wand release: Button to detach wand for above-floor cleaning. Dust cup release: Button to remove dust cup for emptying.

LED Indicators: Lights indicate power status and filter maintenance needs.

Settings: Carpet mode (activates brush roll), Hard floor mode (deactivates brush roll for debris pickup), Lift-Away mode (detach pod for portable cleaning).

Using Attachments

Attachments stored on-board: Crevice tool, dusting brush, upholstery tool.

Detach hose from vacuum pod.
Select attachment and insert into end of hose or extension wand.
Use for specific cleaning: Crevice tool for tight spaces, dusting brush for surfaces, upholstery tool for furniture.
Return attachment to storage caddy after use.

Tip: Ensure vacuum is turned off when changing attachments.

Cleaning Modes

Supports multiple cleaning configurations.

Upright mode: Use with floor nozzle for carpets and hard floors.
Lift-Away mode: Detach pod for portable cleaning above floors.
Handheld mode: Remove pod and use with hose and attachments for spot cleaning.
Above-floor mode: Attach extension wand and tools for ceilings, curtains, and stairs.

WARNING! Do not use handheld mode to vacuum liquids or large debris.

Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty after each use.
Clean filters: Rinse HEPA and pre-motor filters every 3 months; air dry completely before reinstalling.
Clear brush rolls: Remove debris from floor nozzle brush rolls regularly.
Check hose and attachments: Remove clogs if suction reduces.
Inspect power cord: Ensure cord is undamaged.

CAUTION! Unplug vacuum before maintenance. Do not operate with wet filters.

Care & Storage

Unplug before storage. Store in a cool, dry place. Wind power cord around cord hooks.

CAUTION! Do not store with wet filters. Keep away from heat sources and direct sunlight.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check power cord connection; try different outlet; ensure power switch is on.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, nozzle, and filters for clogs; clean filters.
Brush roll not spinning	Debris/tangle	Turn off and unplug; clear debris from brush roll; check for hair tangles.
Vacuum overheating	Clog/filter	Turn off and unplug; let cool; check for clogs; clean filters.
Unusual noise	Debris in impeller	Turn off and unplug; check for obstructions in hose or nozzle.

Reset: Unplug for 30 minutes; plug back in if unit overheats.

Service: 1-800-798-7398; sharkclean.com