Shark NV44 Vacuum Cleaner Manual

The Shark NV44 is a versatile upright vacuum cleaner featuring DuoClean PowerFins technology, Lift-Away capability for portable cleaning, Anti-Allergen Complete Seal with HEPA filter, LED headlights, and multiple cleaning modes. It includes a variety of attachments for floors, carpets, upholstery, and above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance 10. Care & Storage 11. Regulatory Information 12. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, DuoClean PowerFins brushroll, Lift-Away pod, Anti-Allergen Complete Seal system, HEPA filter, LED headlights, wand, hose, and accessory attachments.

Feature	Description
DuoClean PowerFins	Dual brushroll system for carpets and hard floors
Lift-Away Mode	Detachable pod for portable above-floor cleaning
Anti-Allergen Complete Seal	Sealed system with HEPA filter to trap dust and allergens
LED Headlights	Illuminates dark areas under furniture
Multi-Surface Settings	Adjustable suction for carpets, hard floors, and delicate rugs
Accessory Storage	Built-in caddy for storing attachments on the vacuum
POWER Button	Turns vacuum on/off
Mode Selector	Switches between floor, carpet, and Lift-Away modes
Brushroll Control	Engages/disengages brushroll for different surfaces
Wand Release	Button to detach wand for extended reach

Assembly & Setup

Unpack all components and inspect for damage.

Attach wand: Insert wand into vacuum body until it clicks into place.
Connect hose: Attach hose to wand and vacuum pod connection points.
Install filters: Place HEPA filter and pre-motor filter in their compartments.
Attach accessories: Store crevice tool, dusting brush, and upholstery tool in caddy.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Plug into a standard 120V outlet and power on.

Select surface mode: Use mode selector for carpet, hard floor, or delicate rugs.
Adjust suction: Use brushroll control to engage for carpets or disengage for hard floors.
Use Lift-Away: Press release button to detach pod for stairs and upholstery.
Empty dust cup: Press release to remove and empty when full.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model: Shark NV44.
Technology: DuoClean PowerFins with Anti-Allergen Complete Seal.
Filtration: HEPA filter and foam pre-motor filter.
Dust Cup Capacity: 1.5 quarts.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, upholstery tool, pet multi-tool.
Power Source: 120V AC, 60Hz.
Weight: 15.2 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on vacuum body and handle.

Body Controls: POWER button, Mode Selector (Floor/Carpet/Lift-Away), Brushroll On/Off, Wand Release.

Handle Controls: Suction control, accessory release button.

Settings: Adjust suction for surface type; use brushroll for carpets; disengage for hard floors. Lift-Away mode detaches pod for portable cleaning. LED lights activate automatically when powered on.

Using Attachments

Accessories stored on vacuum caddy: Crevice tool, dusting brush, upholstery tool, pet multi-tool.

Detach wand: Press wand release button.
Attach tool: Click accessory onto end of wand or hose.
Select mode: Use Lift-Away for above-floor cleaning.
Clean: Use appropriate tool for crevices, dusting, or pet hair.

Tip: Ensure attachments are securely clicked into place before use.

Cleaning Modes

Three primary modes: Floor, Carpet, and Lift-Away.

Floor Mode: Brushroll disengaged for hard surfaces.
Carpet Mode: Brushroll engaged for deep carpet cleaning.
Lift-Away Mode: Detach pod for stairs, furniture, and tight spaces.
Suction Control: Adjust on handle for delicate rugs or high-pile carpets.

WARNING! Do not run vacuum over power cord. Turn off before changing modes.

Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when full.
Clean filters: Rinse HEPA and pre-motor filters monthly; air dry 24 hours.
Clear brushroll: Remove debris from brushroll regularly.
Check hose/wand: Remove clogs if suction decreases.

CAUTION! Unplug vacuum before maintenance. Do not use damaged filters.

Care & Storage

Store in a cool, dry place. Wrap cord around cord hooks.

CAUTION! Do not store with wet filters. Keep away from heat sources.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clog	Empty dust cup; check hose/wand for clogs; clean filters.
Brushroll not spinning	Debris/tangled hair	Turn off and unplug; clear brushroll of obstructions.
Vacuum won't turn on	Power source/overheat	Check outlet; ensure cord is plugged in; wait 60 minutes if overheated.
Unusual noise	Foreign object in brushroll or hose	Inspect and remove object; check for damage.
Dust escaping	Filter not installed/sealed	Ensure filters are properly seated and dry.

Reset: Unplug for 60 minutes if motor overheats.

Service: 1-800-798-7398; sharkclean.com