Shark NV44 26 Vacuum Cleaner Manual

The Shark NV44 26 is a versatile upright vacuum cleaner featuring Lift-Away technology, a motorized brushroll, HEPA filtration, and multiple attachments for whole-home cleaning. It is designed for cleaning carpets, hard floors, and above-floor surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. Operation Guide 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Maintenance & Cleaning 8. Emptying the Dust Cup 9. Filter Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright vacuum body with Lift-Away pod, motorized floor nozzle, wand, hose, and accessory storage caddy.

Feature	Description
Lift-Away Technology	Detachable pod for portable above-floor cleaning
Motorized Brushroll	Deep cleans carpets and agitates debris
HEPA Filtration	Traps 99.9% of dust and allergens
Anti-Allergen Complete Seal	Prevents dust from escaping back into the air
Dust Cup with Empty Button	Easy, hands-free emptying into trash
Accessory Storage Caddy	Holds all attachments on the vacuum
On-Board Hose & Wand	Integrated tools for quick access
Adjustable Suction Control	Customize power for different surfaces
Crevice Tool	For tight spaces and edges
Upholstery Tool	For furniture and stairs

Assembly & Setup

Unpack all parts from the box. Assemble before first use.

Attach the wand: Insert the wand into the vacuum body until it clicks.
Connect the hose: Attach the hose end to the port on the vacuum pod.
Install the floor nozzle: Slide the nozzle onto the wand until secure.
Mount attachments: Place the crevice tool and upholstery tool into the storage caddy.
Plug into a standard 120V AC outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Keep fingers away from moving parts.

Operation Guide

Power on the vacuum using the foot pedal or power switch.

For floor cleaning: Ensure the floor nozzle is attached. Use the brushroll on/off switch for carpets vs. hard floors.
For above-floor cleaning: Press the Lift-Away release button to detach the pod. Attach desired tool to the hose.
Adjust suction: Use the suction control dial on the pod for delicate surfaces.
Turn off and unplug when not in use.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model: Shark NV44 26.
Technology: Lift-Away with Anti-Allergen Complete Seal.
Filtration: HEPA filter, foam filter, and felt filter.
Dust Cup Capacity: 1.2 dry quarts.
Cord Length: 25 feet.
Attachments Included: Motorized floor nozzle, crevice tool, upholstery tool, dusting brush.
Power Source: 120V AC, 60Hz.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on the vacuum body and pod.

On Vacuum Body: Power foot pedal, brushroll on/off switch, Lift-Away release button, suction control dial.

On Floor Nozzle: Brushroll access latch for cleaning.

Settings: Suction control (Low/High), brushroll on (for carpets) / off (for hard floors and area rugs).

Using Attachments

For detailed cleaning: Detach the Lift-Away pod and connect tools to the hose.

Crevice Tool: For baseboards, between cushions, and tight corners.
Upholstery Tool: For sofas, chairs, and stairs.
Dusting Brush: For delicate surfaces, blinds, and shelves.
Motorized Floor Nozzle: For deep carpet cleaning (attached to wand).

Tip: Ensure the hose is fully inserted into the tool for optimal suction.

Maintenance & Cleaning

Regular maintenance ensures peak performance.

Check and clean the brushroll monthly: Remove debris and cut away wrapped hair or strings.
Inspect the hose for clogs if suction is reduced.
Wipe down the exterior with a dry cloth.
Store in a dry place.

WARNING! Always unplug the vacuum before performing any maintenance.

Emptying the Dust Cup

Empty the dust cup when it reaches the MAX fill line.

Press the dust cup release button and lift off the pod.
Hold over a trash can and press the Empty button to open the bottom lid.
Tap gently to remove fine dust. Close the lid securely.
Reattach the dust cup to the pod until it clicks.

CAUTION! Empty dust cup outdoors or in a well-ventilated area if allergies are a concern.

Filter Care

Clean filters regularly to maintain suction and air quality.

HEPA Filter: Rinse with cold water every 3 months. Air dry for 24 hours completely before reinstalling.

Foam & Felt Filters: Rinse as needed. Ensure both are completely dry before use.

WARNING! Never operate the vacuum without all filters installed and completely dry.

Regulatory Information

This appliance complies with FCC Part 15. For your safety, this equipment has been tested and found to comply with the limits for a Class B digital device. Copyright © SharkNinja Operating LLC. Shark and Lift-Away are trademarks of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; try a different outlet; ensure power switch is on.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for blockages; clean filters.
Brushroll not spinning	Debris/overheat	Unplug and remove debris from brushroll; let motor cool for 60 minutes.
Vacuum tipping over	Wand not locked	Ensure wand is fully inserted and locked into the floor nozzle.
Unusual noise	Object in pathway	Turn off and unplug; inspect hose, brushroll, and floor nozzle for obstructions.

Reset: Unplug for 60 minutes to reset thermal protector if motor overheats.

Service: 1-800-798-7398; www.sharkclean.com