Shark NV41 Vacuum Cleaner Manual

The Shark NV41 is a versatile upright vacuum cleaner featuring DuoClean technology, Lift-Away capability, Anti-Allergen Complete Seal, LED headlights, and a swivel steering mechanism. It is designed for deep carpet cleaning and above-floor cleaning with its detachable pod. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Lift-Away Mode 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Dust Cup, Handle with controls, Floor Nozzle with DuoClean brushes, Lift-Away pod, Hose and wand, Various cleaning attachments.

Feature	Description
DuoClean Technology	Dual brushrolls for carpets and hard floors
Lift-Away Mode	Detachable pod for portable above-floor cleaning
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Swivel Steering	Maneuvers easily around obstacles
Dust Cup Release	Easy-empty, bagless dust cup
Power Switch	Turns vacuum on/off
Carpet/Floor Selector	Adjusts brushroll height for different surfaces
Attachment Clip	Stores crevice tool and dusting brush
Wand Release Button	Detaches wand for extended reach

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat surface.

Attach the handle: Align handle with the main body and push until it clicks into place.
Connect the hose: Insert hose end into the port on the front of the vacuum until secure.
Attach the wand: Insert the wand into the hose grip until it clicks.
Install floor nozzle: Align nozzle with the base and push until it locks.
Plug into a standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers clear of moving parts.

First-Time Use

Plug in the vacuum and turn on the power switch.

Select surface setting: Use the Carpet/Floor selector on the nozzle for appropriate height.
Begin vacuuming: Push vacuum forward and back in slow, overlapping strokes.
Use attachments: Detach wand and connect desired tool for above-floor cleaning.
Empty dust cup: Press release button and empty contents into trash when full.

CAUTION! Do not vacuum wet spills, large debris, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model: Shark NV41.
Technology: DuoClean with Anti-Allergen Complete Seal.
Power Cord: 25 feet.
Dust Cup Capacity: 1.3 dry quarts.
Attachments Included: Crevice Tool, Dusting Brush, Upholstery Tool, Pet Multi-Tool.
Filtration:Washable foam and felt filters, HEPA filter. Power Source: 120V AC, 60Hz.
Weight: 14.5 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on the handle and body. Handle: Power Switch. Nozzle: Carpet/Floor Selector, Brushroll On/Off switch (for hard floors).

Indicator Lights: LED lights on nozzle illuminate when powered on. Filter Check light alerts when filters need cleaning.

Settings: Carpet mode (brushroll spins for deep cleaning). Hard Floor mode (brushroll can be turned off to prevent scattering debris). Suction Power: Single motor speed optimized for all surfaces.

Using Attachments

For above-floor cleaning: stairs, furniture, ceilings, blinds.

Turn off and unplug vacuum.
Press Wand Release button to detach wand from floor nozzle.
Select attachment: Crevice Tool for tight spaces; Dusting Brush for surfaces; Upholstery Tool for furniture.
Connect attachment to end of wand or directly to hose.
Plug in vacuum and turn on to use.

Tip: Store attachments on the built-in clip for easy access.

Lift-Away Mode

Enables portable cleaning without moving the entire vacuum.

Ensure vacuum is turned off.
Press the Lift-Away release button on the back of the pod.
Lift the pod away from the floor nozzle and base.
Carry the pod to clean stairs, furniture, or other above-floor areas.
To reattach, align pod with base and push down until it clicks.

WARNING! Do not lift by the hose or wand. Support the pod with both hands.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup after each use or when full.
Clean filters: Rinse foam and felt filters every 3 months; replace HEPA filter every year.
Check brushroll: Regularly remove hair and debris wrapped around brushroll.
Inspect hose and wand for clogs if suction decreases.

CAUTION! Unplug vacuum before any maintenance. Allow all filters to dry completely for 24 hours before reinstalling.

Regulatory Information

This vacuum cleaner complies with FCC Part 15 Subpart B for Class B digital devices. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power source/switch	Check outlet; ensure power switch is ON; check cord for damage.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for blockages; clean filters.
Brushroll not spinning	Debris/selector setting	Turn off, unplug, and clear debris from brushroll; ensure selector is in CARPET mode.
Vacuum is difficult to push	Height setting	Adjust Carpet/Floor selector to a higher setting for thick carpets.
Dust leaking from vacuum	Filter installation	Ensure all filters are properly installed and seals are intact.

Reset: Unplug for 1 minute, then restart.

Service: 1-800-798-7398; www.sharkclean.com