Shark NV36A series Vacuum Cleaner Manual

The Shark NV36A series is a versatile upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal, DuoClean PowerFins brushroll, LED headlights, and a multi-surface cleaning system. It includes various attachments for above-floor cleaning, a large-capacity dust cup, washable filters, and multiple cleaning modes. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright vacuum with Lift-Away pod, DuoClean PowerFins brushroll, Anti-Allergen Complete Seal system, LED headlights, dust cup, washable filters, and accessory storage.

FeatureDescription
Lift-Away TechnologyDetachable pod for portable above-floor cleaning
DuoClean PowerFinsDual brushroll system for carpets and hard floors
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
LED HeadlightsIlluminates dark areas under furniture
Large Dust CupEasy-empty, no-touch dirt disposal
Washable FiltersFoam and felt filters can be rinsed and reused
Multi-Surface SettingsAdjustable suction for carpets and hard floors
Accessory StorageCrevice tool, pet multi-tool, and dusting brush included
Power Cord25-foot retractable cord with cord wrap
Handle ControlsPower switch, brushroll on/off, suction settings

Assembly & Setup

Unpack and inspect all contents. Assemble according to instructions.

  1. Attach handle: Insert handle into upright body until it clicks into place.
  2. Install wand: Insert wand into hose connector on the vacuum body.
  3. Attach hose: Connect hose to the wand and vacuum pod.
  4. Install accessories: Store crevice tool and dusting brush on the back of the vacuum.
  5. Plug into AC power outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from brushroll during assembly.

First-Time Use

Before first use, ensure filters are installed and dust cup is empty.

  1. Check filters: Ensure foam and felt filters are properly seated in the dust cup.
  2. Select surface setting: Use handle control to choose carpet or hard floor mode.
  3. Turn on: Press power switch on the handle.
  4. Adjust suction: Use suction control for high or low power as needed.
  5. Test attachments: Attach crevice tool or pet multi-tool for specific cleaning tasks.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep vacuum on a level surface during use.

Specifications

Controls and Settings

Handle controls: Power switch, brushroll on/off, suction control. Body controls: Lift-Away release button, dust cup release.

Settings: Carpet mode (brushroll on), hard floor mode (brushroll off), suction control (high/low). Lift-Away: Press release button to detach pod for portable cleaning. Accessory use: Attach tools to wand or hose for above-floor cleaning.

Using Attachments

Attachments store on the back of the vacuum. Use for specific cleaning tasks.

  1. Detach wand: Press wand release button to remove from upright.
  2. Attach tool: Connect crevice tool, pet multi-tool, or dusting brush to wand or hose.
  3. Select suction: Use high suction for deep cleaning, low for delicate surfaces.
  4. Clean: Use tool on upholstery, stairs, ceilings, or tight spaces.
  5. Return tool: Store attachment back on vacuum when done.

Tip: For pet hair, use the pet multi-tool with brushroll on. For dusting, use the dusting brush on low suction.

Cleaning Modes

Three main cleaning modes: Upright, Lift-Away portable, and above-floor with wand.

  1. Upright mode: Use for carpets and large floor areas. Brushroll automatically adjusts.
  2. Lift-Away mode: Press release button to detach pod; clean stairs, furniture, and tight spaces.
  3. Above-floor mode: Attach wand and tool to clean ceilings, blinds, and other elevated surfaces.
  4. Brushroll control: Turn off for hard floors or delicate rugs to prevent scattering debris.
  5. Suction control: Adjust for high-pile carpets or low-power for area rugs.

WARNING! Do not use vacuum without filters installed. Do not vacuum wet surfaces.

Maintenance & Care

Regular maintenance ensures optimal performance. Unplug before servicing.

  1. Empty dust cup: Press release button; empty into trash. Do not overfill.
  2. Clean filters: Rinse foam and felt filters monthly; air dry completely before reinstalling.
  3. Check brushroll: Remove hair and debris from brushroll regularly.
  4. Inspect hose: Clear clogs with long object if suction decreases.
  5. Store properly: Wrap cord, store in dry area.

CAUTION! Do not use vacuum with wet filters. Ensure all parts are dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord/outletCheck power cord connection; try different outlet; ensure power switch is on.
Loss of suctionFull dust cup/clogEmpty dust cup; check hose and wand for clogs; clean filters.
Brushroll not spinningObstruction/settingRemove debris from brushroll; ensure brushroll is turned on for carpet mode.
Vacuum overheatingClog/filtersTurn off and unplug; check for clogs; clean filters; let cool for 60 minutes.
Lift-Away not detachingRelease buttonPress release button firmly; check for obstructions in locking mechanism.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com

Shark NV36A series Vacuum Cleaner Manual © - All Rights Reserved 2025