Shark NV356KCS Vacuum Cleaner Manual

The Shark NV356KCS is a versatile upright vacuum cleaner featuring DuoClean PowerFins technology, Anti-Allergen Complete Seal with HEPA filter, LED headlights, a lift-away pod for portable cleaning, and multiple attachments for above-floor cleaning. It is designed for deep carpet cleaning and hard floor surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: DuoClean PowerFins brushroll, Anti-Allergen Complete Seal system, HEPA filter, LED headlights, lift-away pod, crevice tool, dusting brush, upholstery tool, and wand.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach wand: Insert wand into vacuum body until it clicks.
2. Attach hose: Connect hose to wand and pod.
3. Install filters: Place HEPA filter and pre-motor filter as indicated.
4. Attach tools: Store tools on dock or pod as needed.
5. Plug into AC power.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll.

First-Time Use

Plug in vacuum; ensure all parts are securely connected.

1. Select floor setting: Use brushroll control for carpets (ON) or hard floors (OFF).
2. Power on: Press power button; LED lights will illuminate.
3. Adjust height: Use handle adjustment for carpet pile height if applicable.
4. Test attachments: Attach tools for above-floor cleaning.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

• Model: Shark NV356KCS.
• Technology: DuoClean PowerFins with Anti-Allergen Complete Seal.
• Filtration: HEPA filter, washable foam and felt filters.
• Attachments: Crevice tool, dusting brush, upholstery tool, wand.
• Cord Length: 25 feet.
• Bin Capacity: 0.9 dry quarts.
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.

Controls and Settings

Main controls located on handle and body. Handle: Power button, brushroll on/off switch. Body: Lift-Away release button, bin release, hose connector.

Settings: Brushroll on for carpets; off for hard floors. Height adjustment (if applicable) via lever on vacuum head.

LED indicators: Lights illuminate when powered on. Filter check indicator (if equipped) alerts when filters need cleaning.

Using Attachments

For above-floor cleaning: detach Lift-Away pod or use hose directly.

1. Detach pod: Press release button and lift pod away.
2. Attach tool: Connect desired tool to hose end.
3. Select suction: Use handle controls if adjustable.
4. Clean surfaces: Use crevice tool for edges; dusting brush for shelves; upholstery tool for furniture.

Tip: Ensure hose is fully extended and connections are secure to maintain suction.

Cleaning Modes

Upright mode: For floor cleaning. Lift-Away mode: Portable cleaning for stairs, furniture, ceilings.

1. Upright: Use on floors with brushroll engaged (carpets) or disengaged (hard floors).
2. Lift-Away: Detach pod; carry to cleaning area; use attachments.
3. Above-floor: Connect tools directly to hose without pod for lightweight cleaning.

WARNING! Do not use vacuum to pick up sharp objects, fine dust (e.g., drywall dust), or liquids.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty bin: Press bin release; empty when full or after each use.
2. Clean filters: Wash HEPA and pre-motor filters monthly with cold water; air dry 24 hours.
3. Check brushroll: Remove debris wrapped around brushroll; ensure it spins freely.
4. Inspect hose: Clear clogs if suction reduces.

CAUTION! Unplug vacuum before maintenance. Do not use damaged filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com