Shark NV352Q Vacuum Cleaner Manual

The Shark NV352Q is a versatile upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal, LED headlights, a motorized brushroll for carpets and hard floors, multiple cleaning modes, a large dust cup capacity, and a range of attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright vacuum with Lift-Away pod, motorized floor nozzle, wand, hose, and accessory storage.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach the wand: Insert wand into upright handle until it clicks.
2. Connect the hose: Attach hose to pod and wand connection points.
3. Install floor nozzle: Slide nozzle onto wand base until secure.
4. Store accessories: Place tools in built-in caddy on the pod.
5. Plug into a standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll.

First-Time Use

Power on vacuum; select appropriate cleaning mode.

1. Check brushroll: Ensure it spins freely and is clear of obstructions.
2. Adjust height setting: Use dial on floor nozzle for carpet or hard floor.
3. Test suction: Use handle controls to set desired suction level.
4. Use Lift-Away: Press release button to detach pod for above-floor cleaning.
5. Empty dust cup: Press release button and empty when full.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

• Model: Shark NV352Q.
• Technology: Lift-Away, Anti-Allergen Complete Seal.
• Brushroll: Motorized, with on/off control.
• Dust Cup Capacity: 1.5 dry quarts.
• Cord Length: 25 feet.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Filtration: HEPA filter (washable).
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.

Controls and Settings

Handle controls: Power switch, brushroll on/off, suction adjustment dial.

Floor Nozzle: Height adjustment dial (for carpets/hard floors).

Lift-Away: Release button to detach pod. Dust Cup: Release button for emptying. Accessory Storage: Built-in caddy on pod. LED Lights: Automatically illuminate when power is on.

Using Attachments

For above-floor cleaning: detach pod and connect tools.

1. Turn off vacuum and unplug before changing attachments.
2. Remove wand: Press wand release button.
3. Select tool: Insert crevice tool, dusting brush, or upholstery tool into hose end.
4. Reattach pod: For handheld cleaning, use pod with tool attached.

Tip: Use dusting brush for delicate surfaces; crevice tool for tight spaces.

Cleaning Modes

Upright mode: For floors. Lift-Away mode: For stairs, furniture, ceilings.

1. Upright cleaning: Use floor nozzle with brushroll on for carpets.
2. Hard floor cleaning: Turn brushroll off or set height to hard floor.
3. Above-floor cleaning: Detach pod, attach tool, and clean.
4. Suction control: Adjust dial for delicate items or high-pile carpets.

WARNING! Do not use brushroll on delicate rugs or hard floors with area rugs.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: When full or after each use.
2. Clean filters: Wash HEPA filter every 3 months (air dry completely).
3. Check brushroll: Remove hair and debris monthly.
4. Inspect hose and wand: Clear clogs if suction decreases.
5. Store properly: Wrap cord around hooks; store in dry area.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Turn off, unplug for 30 minutes, then restart.

Service: 1-800-798-7398; sharkclean.com