Shark NV350WC 26 Vacuum Cleaner Manual

The Shark NV350WC 26 is a versatile upright vacuum cleaner featuring a 26-foot power cord, Lift-Away technology for portable cleaning, HEPA filtration, Anti-Allergen Complete Seal, LED headlights, and a motorized brushroll for carpets and hard floors. It includes a variety of attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright body with Lift-Away pod, Handle with controls, Motorized floor nozzle, 26-foot power cord, HEPA filter, Dust cup, and accessory storage caddy.

Feature	Description
Lift-Away Technology	Detachable pod for portable cleaning above floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
HEPA Filtration	Captures fine particles; washable filter
Motorized Brushroll	Automatically adjusts for carpets and hard floors
LED Headlights	Illuminates dark areas under furniture
26-Foot Power Cord	Extended reach for large rooms
Accessory Storage	Caddy holds crevice tool, dusting brush, and upholstery tool
Dust Cup Release	Easy-empty, bagless dust cup
Power Switch	Turns vacuum on/off
Brushroll On/Off	Disengages brushroll for hard floors or delicate rugs

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into upright body until it clicks securely.
Install floor nozzle: Align nozzle with body and push until it locks.
Attach hose: Connect hose to pod and ensure it is seated properly.
Store accessories: Place tools in storage caddy on the vacuum.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before cleaning, perform initial setup.

Check filters: Ensure HEPA and pre-motor filters are installed.
Adjust height setting: Turn dial on floor nozzle to match floor type (low pile, high pile, hard floor).
Test Lift-Away: Press release button to detach pod for above-floor cleaning.
Empty dust cup: Ensure it is empty before first use.
Plug in, turn on power switch, and begin cleaning.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll when vacuum is on.

Specifications

Model: Shark NV350WC 26.
Cord Length: 26 feet.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Technology: Lift-Away for portable cleaning.
Brushroll: Motorized, auto-adjusting for carpets/hard floors.
Attachments: Crevice tool, dusting brush, upholstery tool included.
Dust Cup Capacity: 1.3 dry quarts.
Power Source: 120V AC, 60Hz.
Warranty: Limited 5-year warranty (see manual for details).

Controls and Parts

Main controls located on handle and body. Handle: Power switch, Brushroll on/off button. Body: Lift-Away release button, Height adjustment dial, Dust cup release, Hose connection.

Indicators: LED lights on floor nozzle. Filter check indicator alerts when filters need cleaning.

Settings: Height adjustment (Low Pile, High Pile, Hard Floor), Brushroll on/off for hard floors or delicate rugs. Accessory tools: Use with hose for above-floor cleaning.

Using Attachments

For above-floor cleaning, detach Lift-Away pod and connect tools.

Detach pod: Press Lift-Away release button and lift pod from body.
Select tool: Attach crevice tool, dusting brush, or upholstery tool to hose end.
Clean: Turn on power and clean stairs, furniture, blinds, etc.
Return pod: Reattach pod to body until it clicks.

Tip: Store tools in caddy when not in use to prevent loss.

Cleaning Modes

Two main modes: Upright and Lift-Away.

Upright mode: For floor cleaning. Adjust height dial; turn brushroll on for carpets, off for hard floors.
Lift-Away mode: Press release button to detach pod. Use hose and tools for stairs, ceilings, furniture.
LED lights: Automatically illuminate when vacuum is on to reveal hidden dirt.
Empty dust cup: Press release button to remove; empty into trash; reinstall.

WARNING! Do not vacuum wet spills, large objects, or hot ashes. Unplug before maintenance.

Maintenance & Care

Regular maintenance ensures optimal performance.

Clean filters monthly: Remove HEPA and pre-motor filters; rinse with water; air dry 24 hours before reinstalling.

Clear brushroll: Cut away wrapped hair/strings with scissors (unplug first).

Empty dust cup: Empty after each use to maintain suction.

Check for clogs: Inspect hose, nozzle, and air paths if suction is weak.

CAUTION! Do not use vacuum without filters. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; ensure power switch is on.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, nozzle, and filters for blockages.
Brushroll not spinning	Obstruction/switch	Turn brushroll on; clear hair/debris from brushroll (unplug first).
Vacuum overheating	Clog/filter	Turn off, unplug, let cool; check for clogs; clean filters.
Lift-Away pod not detaching	Lock engaged	Press release button firmly; ensure pod is aligned properly.

Reset: Unplug for 60 minutes if motor overheats.

Service: 1-800-798-7398; sharkclean.com