Shark NV350UKS Series Vacuum Cleaner Manual

The Shark NV350UKS Series is a versatile upright vacuum cleaner featuring DuoClean technology, Anti-Allergen Complete Seal, LED headlights, and a detachable pod for portable cleaning. It includes multiple attachments for above-floor cleaning, a large dust cup capacity, and advanced filtration. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Attachments & Accessories 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with DuoClean brushroll, Detachable pod, Handle with controls, Dust cup, Hose, and various cleaning attachments.

Feature	Description
DuoClean Technology	Combines bristle brush and soft roller for all floor types
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Detachable Pod	Converts to a portable vacuum for above-floor cleaning
Large Dust Cup	Easy-to-empty, no bags required
Advanced Filtration	HEPA and foam filters for improved air quality
Power Switch	Turns vacuum on/off
Brushroll Control	Engages/disengages brushroll for hard floors or carpets
Handle Controls	Adjust suction power and mode settings
Attachment Holder	Stores tools on the vacuum for easy access

Assembly & Setup

Unpack and inspect all components. Assemble according to instructions.

Attach handle: Insert handle into main body until it clicks into place.
Connect hose: Attach hose to the rear port on the vacuum body.
Install attachments: Clip crevice tool, dusting brush, and upholstery tool onto holder.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in vacuum; select appropriate settings for your floor type.

Select floor setting: Use brushroll control for carpets (ON) or hard floors (OFF).
Adjust suction: Use handle controls to set suction power (Low/High).
Begin cleaning: Push vacuum forward and back slowly for optimal pickup.
Use attachments: Detach pod for above-floor cleaning with hose and tools.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

Model: Shark NV350UKS Series.
Technology: DuoClean with Anti-Allergen Complete Seal.
Filtration: HEPA filter, foam filter, and dust cup.
Dust Cup Capacity: 1.0 dry quarts.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, upholstery tool, pet multi-tool.
Power Source: 120V AC, 60Hz.
Weight: 14.5 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Access controls via handle and main body. Power Switch: On/Off. Brushroll Control: Engages brushroll for carpets; disengages for hard floors. Suction Control: Adjusts suction power (Low/High). Handle Release: Detaches pod for portable cleaning.

LED Indicators: Power On, Brushroll Active, Full Dust Cup warning.

Settings: Carpet mode (brushroll ON), Hard Floor mode (brushroll OFF), Above-floor mode (detached pod). Maintenance: Filter reset indicator, dust cup full sensor.

Attachments & Accessories

Included: Crevice tool, Dusting brush, Upholstery tool, Pet multi-tool, Hose, and Extension wand.

Attach tool: Insert into end of hose or extension wand.
Select suction: Use handle controls for appropriate power.
Clean: Use tools for stairs, furniture, curtains, and tight spaces.

Tip: Store attachments on vacuum holder for convenience.

Cleaning Modes

Supports floor cleaning, above-floor cleaning, and detailed cleaning with attachments.

Upright mode: Use for carpets and large floor areas with brushroll engaged.
Hard floor mode: Disengage brushroll to prevent scattering debris.
Above-floor mode: Detach pod, connect hose and tools for furniture and stairs.
Pet hair mode: Use pet multi-tool for removing hair from upholstery.
Detailed cleaning: Use crevice tool for edges and corners.

WARNING! Do not use vacuum to pick up liquids, sharp objects, or hot ashes.

Maintenance & Care

Unplug before maintenance. Empty dust cup after each use. Clean filters monthly.

Empty dust cup: Press release button, remove and empty into trash.
Clean filters: Remove HEPA and foam filters; rinse with water and air dry completely.
Check brushroll: Remove debris wrapped around brushroll; ensure it spins freely.
Inspect hose: Clear any blockages with a long object.

CAUTION! Do not operate with wet filters; allow 24 hours to dry completely.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check power cord connection; try different outlet; ensure switch is ON.
Loss of suction	Full dust cup/blockage	Empty dust cup; check hose, brushroll, and filters for blockages.
Brushroll not spinning	Debris/worn belt	Clear debris from brushroll; inspect and replace belt if necessary.
Overheating	Blockage/filters	Unplug, let cool; check for blockages; clean or replace filters.
Unusual noise	Foreign object	Turn off; inspect brushroll, hose, and dust cup for objects.

Reset: Unplug for 60 seconds; plug back in.

Service: 1-800-798-7398; www.sharkclean.com