Shark NV350 series Vacuum Cleaner Manual

The Shark NV350 series is a versatile upright vacuum cleaner featuring DuoClean technology, Anti-Allergen Complete Seal, LED headlights, and a detachable pod for portable cleaning. It includes multiple attachments for above-floor cleaning, a large dust cup capacity, and various settings for different floor types. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Maintenance & Cleaning 8. Storage & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: DuoClean floor nozzle, Anti-Allergen Complete Seal filtration system, LED headlights, detachable pod, crevice tool, dusting brush, upholstery tool, and pet multi-tool.

Feature	Description
DuoClean Technology	Combines bristle brush and soft roller for carpets and hard floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Detachable Pod	Converts to a portable vacuum for above-floor cleaning
Large Dust Cup	Easy-empty, 1.5-quart capacity
Brushroll Shutoff	Protects delicate rugs and hard floors
Power Switch	Turns vacuum on/off
Floor Selector	Adjusts suction for carpets or hard floors
Height Adjustment	Multiple settings for different carpet pile heights
Wand Release	Quickly detaches wand for attachments

Assembly & Setup

Unpack and inspect all contents. Assemble following steps.

Attach handle: Insert handle into body until it clicks securely.
Connect hose: Attach hose to the back of the vacuum body.
Install wand: Insert wand into hose connector.
Attach floor nozzle: Connect floor nozzle to wand until it locks.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; select appropriate settings.

Select floor type: Use floor selector switch for carpets or hard floors.
Adjust height: For carpets, set height adjustment to match pile.
Turn on: Press power switch; LED lights will illuminate.
Detach pod: Press release button to convert to portable vacuum.
Attach tools: Select appropriate attachment for cleaning needs.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll. Do not vacuum wet surfaces.

Specifications

Model Series: NV350.
Technology: DuoClean with Anti-Allergen Complete Seal.
Filtration: HEPA filter; captures 99.9% of dust and allergens.
Dust Cup Capacity: 1.5 quarts.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, upholstery tool, pet multi-tool.
Power Source: 120V AC, 60Hz.
Weight: 14.5 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, floor selector (Carpet/Hard Floor), wand release button.

Body: Dust cup release, brushroll shutoff switch, height adjustment dial.

Settings: Carpet mode (increased suction), Hard Floor mode (reduced suction), Brushroll On/Off for delicate surfaces. Height adjustment: 5 settings for low to high pile carpets.

Using Attachments

Detach pod to use above-floor cleaning tools.

Press wand release button to detach wand.
Select attachment: Crevice tool for tight spaces; dusting brush for surfaces; upholstery tool for furniture; pet multi-tool for pet hair.
Attach tool to end of wand or hose.
Turn on vacuum and begin cleaning.

Tip: For best results, move attachment slowly over surface.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when full or after each use.
Clean filters: Remove and tap HEPA filter monthly; rinse foam filter every 3 months (air dry completely).
Clear brushroll: Turn off and unplug; remove debris from brushroll regularly.
Check for blockages: Inspect hose, wand, and nozzle if suction decreases.

WARNING! Always unplug vacuum before maintenance. Do not use damaged filters.

Storage & Care

Store in a cool, dry place. Wrap cord around cord hooks.

CAUTION! Do not store with wet filters. Keep away from heat sources.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; ensure power switch is on.
Loss of suction	Full dust cup/blockage	Empty dust cup; check hose, wand, and nozzle for clogs; clean filters.
Brushroll not spinning	Debris/switch setting	Clear brushroll of tangled debris; ensure brushroll shutoff is not engaged.
Vacuum overheating	Blockage/filters	Unplug and let cool; check for blockages; clean or replace filters.
Attachments not fitting	Misalignment	Ensure wand is fully inserted; check for obstructions in connectors.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com